In stead of defining the board EEPROM address in the board headers let's define them in the board config files and make them configurable by Kconfig.
Signed-off-by: Roger Quadros rogerq@ti.com --- board/ti/common/Kconfig | 14 ++++++++++++++ board/ti/ks2_evm/Kconfig | 2 ++ include/configs/am57xx_evm.h | 4 ---- include/configs/dra7xx_evm.h | 4 ---- 4 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig index 4980a04..5003484 100644 --- a/board/ti/common/Kconfig +++ b/board/ti/common/Kconfig @@ -1,3 +1,5 @@ +if ARCH_OMAP2 + config SPL_ENV_SUPPORT default y
@@ -39,3 +41,15 @@ config SPL_POWER_SUPPORT
config SPL_SERIAL_SUPPORT default y + +endif + +config EEPROM_BUS_ADDRESS + int "Board EEPROM's I2C bus address" + range 0 8 + default 0 + +config EEPROM_CHIP_ADDRESS + hex "Board EEPROM's I2C chip address" + range 0 0xff + default 0x50 diff --git a/board/ti/ks2_evm/Kconfig b/board/ti/ks2_evm/Kconfig index c0568ec..9477f53 100644 --- a/board/ti/ks2_evm/Kconfig +++ b/board/ti/ks2_evm/Kconfig @@ -49,3 +49,5 @@ config SYS_CONFIG_NAME default "k2g_evm"
endif + +source "board/ti/common/Kconfig" diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 840502c..d9e1119 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -105,10 +105,6 @@ #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN)
-/* EEPROM */ -#define CONFIG_EEPROM_CHIP_ADDRESS 0x50 -#define CONFIG_EEPROM_BUS_ADDRESS 0 - /* * Default to using SPI for environment, etc. * 0x000000 - 0x040000 : QSPI.SPL (256KiB) diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index da458a4..46beb8b 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -264,8 +264,4 @@ #endif #endif /* NOR support */
-/* EEPROM */ -#define CONFIG_EEPROM_CHIP_ADDRESS 0x50 -#define CONFIG_EEPROM_BUS_ADDRESS 0 - #endif /* __CONFIG_DRA7XX_EVM_H */