Hi Eric,
On Wednesday, January 30, 2013 7:10:52 PM, Eric Nelson wrote:
This patch adds support for the Nitrogen6X board(s) from Boundary Devices. The boards are based on the i.MX6x processor family with two major variants: i.MX6Quad/6Dual i.MX6Dual-Lite/6Solo
More specifically, the board variations are: nitrogen6q i.MX6Q/6D 1GB nitrogen6dl i.MX6DL 1GB nitrogen6s i.MX6S 512MB nitrogen6q2g i.MX6Q/6D 2GB nitrogen6dl2g i.MX6DL 2GB nitrogen6s1g i.MX6S 1GB
Refer to http://boundarydevices.com/products/ for details.
Signed-off-by: Eric Nelson eric.nelson@boundarydevices.com
You have probably already noticed it, but just to make sure you do not miss it, my series about the i.MX6Q DDR3 init also affects this patch. And for the 6DL and 6S variants, there is an equivalent change to make, translated to 400 MHz (DDR3-800).
After a quick look at this patch, it looks good.
Best regards, Benoît