On 03/20/2015 07:28 PM, York Sun wrote:
This set adds necessary support in common ls2085a support and board support for QDS and RDB.
Changes in v5: Re-generate patches using patman default flags s/LayerScape/Layerscape/g Fix board README for inconsistent SoC name Fix comment in board header file s/LS2080/LS2085/g Fix Kconfig help for inconsistent SoC name Update LS2085AQDS README to include instructions to form NAND image Update LS2085ARDB README to include instructions to form NAND image
Changes in v4: Remove temporary variable cntfrq. Fix board README for inconsistent SoC name Fix comments in board header file Update MAINTAINERS file Update MAINTAINERS file
Changes in v3: Move secondary core fix to mp.c. Replace hard-coded value with COUNTER_FREQUENCY.
Changes in v2: Rebase after adding macros CONFIG_SYS_I2C_MXC_I2C3 in another patch set Fix CNTFRQ for secondary cores when COUNTER_FREQUENCY_REAL is defined. Add comment to I2C workaround
Bhupesh Sharma (1): armv8/fsl-ch3: Add support to print RCW configuration
J. German Rivera (2): drivers/fsl-mc: Changed MC firmware loading for new boot architecture drivers/fsl-mc: Autoload AOIP image from NOR flash
Jaiprakash Singh (1): driver/ifc: Add 64KB page support
Minghuan Lian (1): armv8: Add SerDes framework for Layerscape Architecture
Prabhakar Kushwaha (4): armv8/ls2085a: Update common header file driver/ldpaa_eth: Update ldpaa ethernet driver driver/ldpaa: Add support of WRIOP static data structure board/ls2085qds: Add support ethernet
Scott Wood (8): armv8/fsl-lsch3: Set nodes in DVM domain fsl-lsch3: Introduce place for common early SoC init armv8/ls2085a: Add workaround for USB erratum A-008751 armv8/fsl-lsch3: Use correct compatible for serial clock fixup armv8/fsl-lsch3: Enable system error aborts armv8/ls2085aqds: NAND boot support freescale/qixis: Add support for booting from NAND armv8/ls2085ardb: Enable NAND SPL support
Shaohui Xie (1): net/memac_phy: reuse driver for little endian SoCs
Yangbo Lu (1): ls2085a: esdhc: Add esdhc support for ls2085a
York Sun (7): armv8/fsl-lsch3: Implement workaround for erratum A008585 armv8/fsl-lsch3: Fix platform clock calculation armv8/ls2085a: Fix generic timer clock source armv8/fsl-lsch3: Update early MMU table armv8/ls2085aqds: Add support of LS2085AQDS platform armv8/ls2085ardb: Add support of LS2085ARDB platform armv8/fsl-lsch3: Implement workaround for I2C issue
pankaj chauhan (2): armv8/ls2085a: Add support for reset request net/phy/cortina: Fix compilation warning
This set (except 17/28 and 21/28) is applied to fsl-qoriq master, awaiting upstream.
[U-Boot,v5,01/28] armv8/fsl-lsch3: Implement workaround for erratum A008585 [U-Boot,v5,02/28] armv8/ls2085a: Update common header file [U-Boot,v5,03/28] armv8/fsl-lsch3: Fix platform clock calculation [U-Boot,v5,04/28] armv8/ls2085a: Fix generic timer clock source [U-Boot,v5,05/28] armv8/ls2085a: Add support for reset request [U-Boot,v5,06/28] armv8/fsl-lsch3: Set nodes in DVM domain [U-Boot,v5,07/28] armv8/fsl-lsch3: Update early MMU table [U-Boot,v5,08/28] fsl-lsch3: Introduce place for common early SoC init [U-Boot,v5,09/28] armv8/ls2085a: Add workaround for USB erratum A-008751 [U-Boot,v5,10/28] armv8/fsl-lsch3: Use correct compatible for serial clock fixup [U-Boot,v5,11/28] driver/ldpaa_eth: Update ldpaa ethernet driver [U-Boot,v5,12/28] armv8: Add SerDes framework for Layerscape Architecture [U-Boot,v5,13/28] net/phy/cortina: Fix compilation warning [U-Boot,v5,14/28] drivers/fsl-mc: Changed MC firmware loading for new boot architecture [U-Boot,v5,15/28] net/memac_phy: reuse driver for little endian SoCs [U-Boot,v5,16/28] armv8/fsl-ch3: Add support to print RCW configuration [U-Boot,v5,18/28] driver/ldpaa: Add support of WRIOP static data structure [U-Boot,v5,19/28] armv8/ls2085aqds: Add support of LS2085AQDS platform [U-Boot,v5,20/28] armv8/ls2085ardb: Add support of LS2085ARDB platform [U-Boot,v5,22/28] board/ls2085qds: Add support ethernet [U-Boot,v5,23/28] driver/ifc: Add 64KB page support [U-Boot,v9,24/28] armv8/ls2085aqds: NAND boot support [U-Boot,v5,25/28] freescale/qixis: Add support for booting from NAND [U-Boot,v9,26/28] armv8/ls2085ardb: Enable NAND SPL support [U-Boot,v5,27/28] ls2085a: esdhc: Add esdhc support for ls2085a [U-Boot,v6,28/28] armv8/fsl-lsch3: Implement workaround for I2C erratum A009203
York