Added the pruss subsystem to the device tree based on the device tree info from the Linux kernel.
Signed-off-by: Greg Leonberg greg.leonberg@sunhillo.com --- arch/arm/dts/dra7.dtsi | 198 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 198 insertions(+)
diff --git a/arch/arm/dts/dra7.dtsi b/arch/arm/dts/dra7.dtsi index e2e958b..5bcdb51 100644 --- a/arch/arm/dts/dra7.dtsi +++ b/arch/arm/dts/dra7.dtsi @@ -517,6 +517,204 @@ interrupt-names = "edma3_tcerrint"; };
+ pruss1: pruss@4b200000 { + compatible = "ti,am5728-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b200000 0x80000>; + dma-ranges; + + pruss1_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x8000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + pruss1_cfg: cfg@26000 { + compatible = "syscon"; + reg = <0x26000 0x2000>; + }; + + pruss1_iepclk_mux: iepclk-mux { + #clock-cells = <0>; + clocks = <&dpll_gmac_m3x2_ck>, + <&dpll_gmac_h13x2_ck>; + }; + + pruss1_iep: iep@2e000 { + compatible = "ti,am5728-icss-iep"; + reg = <0x2e000 0x31c>; + clocks = <&pruss1_iepclk_mux>; + }; + + pruss1_ecap: ecap@30000 { + compatible = "ti,pruss-ecap"; + reg = <0x30000 0x60>; + }; + + pruss1_mii_rt: mii-rt@32000 { + compatible = "syscon"; + reg = <0x32000 0x58>; + }; + + pruss1_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + ti,irqs-shared = /bits/ 8 <6 7>; + }; + + pru1_0: pru1_0@34000 { + compatible = "ti,am5728-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru1_0-fw"; + interrupt-parent = <&pruss1_intc>; + interrupts = <16>, <17>; + interrupt-names = "vring", "kick"; + }; + + pru1_1: pru1_1@38000 { + compatible = "ti,am5728-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru1_1-fw"; + interrupt-parent = <&pruss1_intc>; + interrupts = <18>, <19>; + interrupt-names = "vring", "kick"; + }; + + pruss1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&dpll_gmac_h13x2_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + reg = <0x32400 0x90>; + status = "disabled"; + }; + }; + + pruss2: pruss@4b280000 { + compatible = "ti,am5728-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b280000 0x80000>; + dma-ranges; + + pruss2_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x8000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + pruss2_cfg: cfg@26000 { + compatible = "syscon"; + reg = <0x26000 0x2000>; + }; + + pruss2_iepclk_mux: iepclk-mux { + #clock-cells = <0>; + clocks = <&dpll_gmac_m3x2_ck>, + <&dpll_gmac_h13x2_ck>; + }; + + pruss2_iep: iep@2e000 { + compatible = "ti,am5728-icss-iep"; + reg = <0x2e000 0x31c>; + clocks = <&pruss2_iepclk_mux>; + }; + + pruss2_ecap: ecap@30000 { + compatible = "ti,pruss-ecap"; + reg = <0x30000 0x60>; + }; + + pruss2_mii_rt: mii-rt@32000 { + compatible = "syscon"; + reg = <0x32000 0x58>; + }; + + pruss2_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + ti,irqs-shared = /bits/ 8 <6 7>; + }; + + pru2_0: pru2_0@34000 { + compatible = "ti,am5728-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru2_0-fw"; + interrupt-parent = <&pruss2_intc>; + interrupts = <16>, <17>; + interrupt-names = "vring", "kick"; + }; + + pru2_1: pru2_1@38000 { + compatible = "ti,am5728-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru2_1-fw"; + interrupt-parent = <&pruss2_intc>; + interrupts = <18>, <19>; + interrupt-names = "vring", "kick"; + }; + + pruss2_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&dpll_gmac_h13x2_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + reg = <0x32400 0x90>; + status = "disabled"; + }; + }; + gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>;