By default, we boot from USDHC3 on mx6qsabresd, so let it be mmc dev 0.
Without this fix kernel cannot be retrieved from mmc with the default environment.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- board/freescale/mx6qsabresd/mx6qsabresd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c index 65c4a1a..fbcb6cd 100644 --- a/board/freescale/mx6qsabresd/mx6qsabresd.c +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -134,8 +134,8 @@ static void setup_iomux_uart(void)
#ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg usdhc_cfg[3] = { - {USDHC2_BASE_ADDR}, {USDHC3_BASE_ADDR}, + {USDHC2_BASE_ADDR}, {USDHC4_BASE_ADDR}, };
@@ -162,13 +162,13 @@ int board_mmc_init(bd_t *bis)
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { switch (i) { - case 0: + case 1: imx_iomux_v3_setup_multiple_pads( usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); gpio_direction_input(USDHC2_CD_GPIO); usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); break; - case 1: + case 0: imx_iomux_v3_setup_multiple_pads( usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); gpio_direction_input(USDHC3_CD_GPIO);