The current flow of authenticate_image() will print the HAB event log even if we reject an element of the IVT header before ever calling into the ROM. This can be confusing.
This patch changes the flow of the code so that the HAB event log is only printed out if we have called into the ROM and received some sort of status code.
Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Suggested-by: Cc: Breno Matheus Lima brenomatheus@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Peng Fan peng.fan@nxp.com Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Sven Ebenfeld sven.ebenfeld@gmail.com Cc: George McCollister george.mccollister@gmail.com Tested-by: Breno Lima breno.lima@nxp.com Reviewed-by: Fabio Estevam fabio.estevam@nxp.com --- arch/arm/mach-imx/hab.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index 079423a..3ae88a4 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -478,14 +478,14 @@ int authenticate_image(uint32_t ddr_start, uint32_t image_size,
if (hab_rvt_entry() != HAB_SUCCESS) { puts("hab entry function fail\n"); - goto hab_caam_clock_disable; + goto hab_exit_failure_print_status; }
status = hab_rvt_check_target(HAB_TGT_MEMORY, (void *)ddr_start, bytes); if (status != HAB_SUCCESS) { printf("HAB check target 0x%08x-0x%08x fail\n", ddr_start, ddr_start + bytes); - goto hab_caam_clock_disable; + goto hab_exit_failure_print_status; } #ifdef DEBUG printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", ivt_offset, ivt_addr); @@ -543,12 +543,14 @@ int authenticate_image(uint32_t ddr_start, uint32_t image_size, load_addr = 0; }
-hab_caam_clock_disable: - hab_caam_clock_enable(0); - +hab_exit_failure_print_status: #if !defined(CONFIG_SPL_BUILD) get_hab_status(); #endif + +hab_caam_clock_disable: + hab_caam_clock_enable(0); + if (load_addr != 0) result = 0;