As every TPM drivers support UCLASS_TPM, we can only rely on DM_TPM functions.
This simplify a bit the code.
Signed-off-by: Christophe Ricard christophe-h.ricard@st.com ---
Changes in v2: None
common/cmd_tpm.c | 13 +-------- drivers/tpm/tpm_tis_infineon.c | 1 - include/tis.h | 60 ------------------------------------------ include/tpm.h | 6 ----- lib/tpm.c | 20 +++----------- 5 files changed, 4 insertions(+), 96 deletions(-) delete mode 100644 include/tis.h
diff --git a/common/cmd_tpm.c b/common/cmd_tpm.c index 97501cc..add6bfb 100644 --- a/common/cmd_tpm.c +++ b/common/cmd_tpm.c @@ -443,7 +443,6 @@ TPM_COMMAND_NO_ARG(tpm_force_clear) TPM_COMMAND_NO_ARG(tpm_physical_enable) TPM_COMMAND_NO_ARG(tpm_physical_disable)
-#ifdef CONFIG_DM_TPM static int get_tpm(struct udevice **devp) { int rc; @@ -476,11 +475,11 @@ static int do_tpm_info(cmd_tbl_t *cmdtp, int flag, int argc,
return 0; } -#endif
static int do_tpm_raw_transfer(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { + struct udevice *dev; void *command; uint8_t response[1024]; size_t count, response_length = sizeof(response); @@ -492,17 +491,11 @@ static int do_tpm_raw_transfer(cmd_tbl_t *cmdtp, int flag, return CMD_RET_FAILURE; }
-#ifdef CONFIG_DM_TPM - struct udevice *dev; - rc = get_tpm(&dev); if (rc) return rc;
rc = tpm_xfer(dev, command, count, response, &response_length); -#else - rc = tis_sendrecv(command, count, response, &response_length); -#endif free(command); if (!rc) { puts("tpm response:\n"); @@ -657,9 +650,7 @@ TPM_COMMAND_NO_ARG(tpm_end_oiap) U_BOOT_CMD_MKENT(cmd, 0, 1, do_tpm_ ## cmd, "", "")
static cmd_tbl_t tpm_commands[] = { -#ifdef CONFIG_DM_TPM U_BOOT_CMD_MKENT(info, 0, 1, do_tpm_info, "", ""), -#endif U_BOOT_CMD_MKENT(init, 0, 1, do_tpm_init, "", ""), U_BOOT_CMD_MKENT(startup, 0, 1, @@ -730,9 +721,7 @@ U_BOOT_CMD(tpm, CONFIG_SYS_MAXARGS, 1, do_tpm, "cmd args...\n" " - Issue TPM command <cmd> with arguments <args...>.\n" "Admin Startup and State Commands:\n" -#ifdef CONFIG_DM_TPM " info - Show information about the TPM\n" -#endif " init\n" " - Put TPM into a state where it waits for 'startup' command.\n" " startup mode\n" diff --git a/drivers/tpm/tpm_tis_infineon.c b/drivers/tpm/tpm_tis_infineon.c index 88eb786..f57c328 100644 --- a/drivers/tpm/tpm_tis_infineon.c +++ b/drivers/tpm/tpm_tis_infineon.c @@ -24,7 +24,6 @@ #include <dm.h> #include <fdtdec.h> #include <i2c.h> -#include <tis.h> #include <tpm.h> #include <asm-generic/errno.h> #include <linux/compiler.h> diff --git a/include/tis.h b/include/tis.h deleted file mode 100644 index 1985d9e..0000000 --- a/include/tis.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __TIS_H -#define __TIS_H - -#ifndef CONFIG_DM_TPM - -#include <common.h> - -/* Low-level interface to access TPM */ - -/* - * tis_init() - * - * Initialize the TPM device. Returns 0 on success or -1 on - * failure (in case device probing did not succeed). - */ -int tis_init(void); - -/* - * tis_open() - * - * Requests access to locality 0 for the caller. After all commands have been - * completed the caller is supposed to call tis_close(). - * - * Returns 0 on success, -1 on failure. - */ -int tis_open(void); - -/* - * tis_close() - * - * terminate the currect session with the TPM by releasing the locked - * locality. Returns 0 on success of -1 on failure (in case lock - * removal did not succeed). - */ -int tis_close(void); - -/* - * tis_sendrecv() - * - * Send the requested data to the TPM and then try to get its response - * - * @sendbuf - buffer of the data to send - * @send_size size of the data to send - * @recvbuf - memory to save the response to - * @recv_len - pointer to the size of the response buffer - * - * Returns 0 on success (and places the number of response bytes at recv_len) - * or -1 on failure. - */ -int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, uint8_t *recvbuf, - size_t *recv_len); -#endif - -#endif /* __TIS_H */ diff --git a/include/tpm.h b/include/tpm.h index 086b672..9a6585d 100644 --- a/include/tpm.h +++ b/include/tpm.h @@ -8,8 +8,6 @@ #ifndef __TPM_H #define __TPM_H
-#include <tis.h> - /* * Here is a partial implementation of TPM commands. Please consult TCG Main * Specification for definitions of TPM commands. @@ -196,8 +194,6 @@ struct tpm_permanent_flags { u8 disable_full_da_logic_info; } __packed;
-#ifdef CONFIG_DM_TPM - /* Max buffer size supported by our tpm */ #define TPM_DEV_BUFSIZE 1260
@@ -375,8 +371,6 @@ int tpm_get_desc(struct udevice *dev, char *buf, int size); int tpm_xfer(struct udevice *dev, const uint8_t *sendbuf, size_t send_size, uint8_t *recvbuf, size_t *recv_size);
-#endif /* CONFIG_DM_TPM */ - /** * Initialize TPM device. It must be called before any TPM commands. * diff --git a/lib/tpm.c b/lib/tpm.c index 5d5f707..8a62216 100644 --- a/lib/tpm.c +++ b/lib/tpm.c @@ -7,7 +7,6 @@
#include <common.h> #include <dm.h> -#include <tis.h> #include <tpm.h> #include <asm/unaligned.h> #include <u-boot/sha1.h> @@ -230,6 +229,8 @@ static uint32_t tpm_return_code(const void *response) static uint32_t tpm_sendrecv_command(const void *command, void *response, size_t *size_ptr) { + struct udevice *dev; + int ret; uint8_t response_buffer[COMMAND_BUFFER_SIZE]; size_t response_length; uint32_t err; @@ -240,19 +241,13 @@ static uint32_t tpm_sendrecv_command(const void *command, response = response_buffer; response_length = sizeof(response_buffer); } -#ifdef CONFIG_DM_TPM - struct udevice *dev; - int ret;
ret = uclass_first_device(UCLASS_TPM, &dev); if (ret) return ret; err = tpm_xfer(dev, command, tpm_command_size(command), response, &response_length); -#else - err = tis_sendrecv(command, tpm_command_size(command), - response, &response_length); -#endif + if (err < 0) return TPM_LIB_ERROR; if (size_ptr) @@ -264,21 +259,12 @@ static uint32_t tpm_sendrecv_command(const void *command, int tpm_init(void) { int err; - -#ifdef CONFIG_DM_TPM struct udevice *dev;
err = uclass_first_device(UCLASS_TPM, &dev); if (err) return err; return tpm_open(dev); -#else - err = tis_init(); - if (err) - return err; - - return tis_open(); -#endif }
uint32_t tpm_startup(enum tpm_startup_type mode)