On Thu, Dec 5, 2013 at 8:18 PM, Dennis Gilmore dennis@ausil.us wrote:
Signed-off-by: Dennis Gilmore dennis@ausil.us
include/configs/wandboard.h | 40 +++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-)
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index e9c7e64..02d8968 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -40,6 +40,9 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200
+/* enable generic distro config */ +#define DISTRO_DEFAULTS 1
/* Command definition */ #include <config_cmd_default.h>
@@ -48,7 +51,6 @@ #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR
-#define CONFIG_BOOTDELAY 5
#define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) @@ -65,6 +67,9 @@ #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER
+#define CONFIG_BOOTDELAY 5
#define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -74,6 +79,11 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_NET
+#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ
+/* Ethernet Configuration */ #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -113,8 +123,30 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr=0x11000000\0" \
"fdt_addr=0x11100000\0" \"fdt_addr_r=0x11200000\0" \"pxefile_addr_r=0x11300000\0" \"scr_addr_r=0x11400000\0" \"kernel_addr_r=0x11500000\0" \"ramdisk_addr_r=0x13500000\0" \ "boot_fdt=try\0" \"bootcmd_setup=mmc rescan\0" \"bootcmd_pxe=setenv bootfile \"\" ;dhcp; tftp ${fdt_addr} /dtb/${fdt_file}; pxe get; pxe boot\0" \"bootcmd_disk_scr=ext2load ${boot_ifc} ${bootdevice} ${scr_addr_r} boot.scr &&
Why all the non-generic "ext2load"'s? use just "load", then it'll work with both fat, ext2/3/4 & btrfs...
Regards,