Provide a defconfig file for the Raspberry Pi 3 Model B+. It is based on the Raspberry Pi 3 file, just changing the device tree.
Signed-off-by: Heinrich Schuchardt xypron.glpk@gmx.de --- configs/rpi_3_b_plus_defconfig | 43 ++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 configs/rpi_3_b_plus_defconfig
diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig new file mode 100644 index 0000000000..2ae7b6dcae --- /dev/null +++ b/configs/rpi_3_b_plus_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_BCM283X=y +CONFIG_SYS_TEXT_BASE=0x00080000 +CONFIG_TARGET_RPI_3=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_PROMPT="U-Boot> " +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_FS_UUID=y +CONFIG_OF_EMBED=y +CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b-plus" +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_DM_KEYBOARD=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_BCM2835=y +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_GENERIC is not set +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_DM_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_CONSOLE_SCROLL_LINES=10 +CONFIG_PHYS_TO_BUS=y +CONFIG_OF_LIBFDT_OVERLAY=y -- 2.20.1