Remove not needed code in the spl board code.
Signed-off-by: Teresa Remmet t.remmet@phytec.de --- board/phytec/phycore_imx8mm/spl.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-)
diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c index 64f0780f6e65..d54145ef995c 100644 --- a/board/phytec/phycore_imx8mm/spl.c +++ b/board/phytec/phycore_imx8mm/spl.c @@ -12,8 +12,6 @@ #include <asm/global_data.h> #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/iomux-v3.h> -#include <dm/device.h> -#include <dm/uclass.h> #include <hang.h> #include <init.h> #include <log.h> @@ -39,7 +37,7 @@ int spl_board_boot_device(enum boot_device boot_dev_spl) } }
-void spl_dram_init(void) +static void spl_dram_init(void) { ddr_init(&dram_timing); } @@ -54,15 +52,10 @@ void spl_board_init(void) puts("Normal Boot\n"); }
-#ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { - /* Just empty function now - can't decide what to choose */ - debug("%s: %s\n", __func__, name); - return 0; } -#endif
#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE) @@ -91,7 +84,6 @@ int board_early_init_f(void)
void board_init_f(ulong dummy) { - struct udevice *dev; int ret;
arch_cpu_init(); @@ -100,8 +92,6 @@ void board_init_f(ulong dummy)
board_early_init_f();
- timer_init(); - preloader_console_init();
/* Clear the BSS. */ @@ -113,13 +103,6 @@ void board_init_f(ulong dummy) hang(); }
- ret = uclass_get_device_by_name(UCLASS_CLK, - "clock-controller@30380000", &dev); - if (ret < 0) { - printf("Failed to find clock node. Check device tree\n"); - hang(); - } - enable_tzc380();
/* DDR initialization */