This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it.
Cc: Fabio Estevam fabio.estevam@nxp.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-imx/mx5/Kconfig | 5 - board/freescale/mx53smd/Kconfig | 15 --- board/freescale/mx53smd/MAINTAINERS | 6 - board/freescale/mx53smd/Makefile | 7 -- board/freescale/mx53smd/imximage.cfg | 82 -------------- board/freescale/mx53smd/mx53smd.c | 159 --------------------------- configs/mx53smd_defconfig | 25 ----- include/configs/mx53smd.h | 111 ------------------- 8 files changed, 410 deletions(-) delete mode 100644 board/freescale/mx53smd/Kconfig delete mode 100644 board/freescale/mx53smd/MAINTAINERS delete mode 100644 board/freescale/mx53smd/Makefile delete mode 100644 board/freescale/mx53smd/imximage.cfg delete mode 100644 board/freescale/mx53smd/mx53smd.c delete mode 100644 configs/mx53smd_defconfig delete mode 100644 include/configs/mx53smd.h
diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig index 989b9adf9153..0a2897309020 100644 --- a/arch/arm/mach-imx/mx5/Kconfig +++ b/arch/arm/mach-imx/mx5/Kconfig @@ -63,10 +63,6 @@ config TARGET_MX53PPD help Enable support for the GE Healthcare PPD.
-config TARGET_MX53SMD - bool "Support mx53smd" - select MX53 - config TARGET_TS4800 bool "Support TS4800" select MX51 @@ -79,7 +75,6 @@ config SYS_SOC source "board/beckhoff/mx53cx9020/Kconfig" source "board/freescale/mx51evk/Kconfig" source "board/freescale/mx53loco/Kconfig" -source "board/freescale/mx53smd/Kconfig" source "board/ge/mx53ppd/Kconfig" source "board/k+p/kp_imx53/Kconfig" source "board/menlo/m53menlo/Kconfig" diff --git a/board/freescale/mx53smd/Kconfig b/board/freescale/mx53smd/Kconfig deleted file mode 100644 index 1195d33d067b..000000000000 --- a/board/freescale/mx53smd/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_MX53SMD - -config SYS_BOARD - default "mx53smd" - -config SYS_VENDOR - default "freescale" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "mx53smd" - -endif diff --git a/board/freescale/mx53smd/MAINTAINERS b/board/freescale/mx53smd/MAINTAINERS deleted file mode 100644 index 17ec376f2a92..000000000000 --- a/board/freescale/mx53smd/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MX53SMD BOARD -M: Fabio Estevam fabio.estevam@nxp.com -S: Maintained -F: board/freescale/mx53smd/ -F: include/configs/mx53smd.h -F: configs/mx53smd_defconfig diff --git a/board/freescale/mx53smd/Makefile b/board/freescale/mx53smd/Makefile deleted file mode 100644 index f0347578d586..000000000000 --- a/board/freescale/mx53smd/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007, Guennadi Liakhovetski lg@denx.de -# -# (C) Copyright 2011 Freescale Semiconductor, Inc. - -obj-y := mx53smd.o diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg deleted file mode 100644 index fd033187b7cd..000000000000 --- a/board/freescale/mx53smd/imximage.cfg +++ /dev/null @@ -1,82 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -DATA 4 0x53fa8554 0x00300000 -DATA 4 0x53fa8558 0x00300040 -DATA 4 0x53fa8560 0x00300000 -DATA 4 0x53fa8564 0x00300040 -DATA 4 0x53fa8568 0x00300040 -DATA 4 0x53fa8570 0x00300000 -DATA 4 0x53fa8574 0x00300000 -DATA 4 0x53fa8578 0x00300000 -DATA 4 0x53fa857c 0x00300040 -DATA 4 0x53fa8580 0x00300040 -DATA 4 0x53fa8584 0x00300000 -DATA 4 0x53fa8588 0x00300000 -DATA 4 0x53fa8590 0x00300040 -DATA 4 0x53fa8594 0x00300000 -DATA 4 0x53fa86f0 0x00300000 -DATA 4 0x53fa86f4 0x00000000 -DATA 4 0x53fa86fc 0x00000000 -DATA 4 0x53fa8714 0x00000000 -DATA 4 0x53fa8718 0x00300000 -DATA 4 0x53fa871c 0x00300000 -DATA 4 0x53fa8720 0x00300000 -DATA 4 0x53fa8724 0x04000000 -DATA 4 0x53fa8728 0x00300000 -DATA 4 0x53fa872c 0x00300000 -DATA 4 0x63fd9088 0x35343535 -DATA 4 0x63fd9090 0x4d444c44 -DATA 4 0x63fd907c 0x01370138 -DATA 4 0x63fd9080 0x013b013c -DATA 4 0x63fd9018 0x00011740 -DATA 4 0x63fd9000 0xc3190000 -DATA 4 0x63fd900c 0x9f5152e3 -DATA 4 0x63fd9010 0xb68e8a63 -DATA 4 0x63fd9014 0x01ff00db -DATA 4 0x63fd902c 0x000026d2 -DATA 4 0x63fd9030 0x009f0e21 -DATA 4 0x63fd9008 0x12273030 -DATA 4 0x63fd9004 0x0002002d -DATA 4 0x63fd901c 0x00008032 -DATA 4 0x63fd901c 0x00008033 -DATA 4 0x63fd901c 0x00028031 -DATA 4 0x63fd901c 0x052080b0 -DATA 4 0x63fd901c 0x04008040 -DATA 4 0x63fd901c 0x0000803a -DATA 4 0x63fd901c 0x0000803b -DATA 4 0x63fd901c 0x00028039 -DATA 4 0x63fd901c 0x05208138 -DATA 4 0x63fd901c 0x04008048 -DATA 4 0x63fd9020 0x00005800 -DATA 4 0x63fd9040 0x05380003 -DATA 4 0x63fd9058 0x00022227 -DATA 4 0x63fd901C 0x00000000 diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c deleted file mode 100644 index 2f91a0525c4b..000000000000 --- a/board/freescale/mx53smd/mx53smd.c +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2011 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <init.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> -#include <asm/arch/iomux-mx53.h> -#include <linux/errno.h> -#include <netdev.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> -#include <asm/gpio.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - u32 size1, size2; - - size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); - - gd->ram_size = size1 + size2; - - return 0; -} -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - - return 0; -} - -#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -static void setup_iomux_uart(void) -{ - static const iomux_v3_cfg_t uart_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); -} - -static void setup_iomux_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), - NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - PAD_CTL_HYS | PAD_CTL_PKE), - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - -#ifdef CONFIG_FSL_ESDHC_IMX -struct fsl_esdhc_cfg esdhc_cfg[1] = { - {MMC_SDHC1_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13); - gpio_direction_input(IMX_GPIO_NR(3, 13)); - return !gpio_get_value(IMX_GPIO_NR(3, 13)); -} - -#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) -#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ - PAD_CTL_DSE_HIGH) - -int board_mmc_init(struct bd_info *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), - MX53_PAD_EIM_DA13__GPIO3_13, - }; - - u32 index; - int ret; - - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - - for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { - switch (index) { - case 0: - imx_iomux_v3_setup_multiple_pads(sd1_pads, - ARRAY_SIZE(sd1_pads)); - break; - - default: - printf("Warning: you configured more ESDHC controller" - "(%d) as supported by the board(1)\n", - CONFIG_SYS_FSL_ESDHC_NUM); - return -EINVAL; - } - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]); - if (ret) - return ret; - } - - return 0; -} -#endif - -int board_early_init_f(void) -{ - setup_iomux_uart(); - setup_iomux_fec(); - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -int checkboard(void) -{ - puts("Board: MX53SMD\n"); - - return 0; -} diff --git a/configs/mx53smd_defconfig b/configs/mx53smd_defconfig deleted file mode 100644 index 0513bf505cfc..000000000000 --- a/configs/mx53smd_defconfig +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX5=y -CONFIG_SYS_TEXT_BASE=0x77800000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x60000 -CONFIG_TARGET_MX53SMD=y -# CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53smd/imximage.cfg" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC_IMX=y -CONFIG_MTD=y -CONFIG_MII=y -CONFIG_MXC_UART=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h deleted file mode 100644 index 79c86725a270..000000000000 --- a/include/configs/mx53smd.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. - * - * Configuration settings for the MX53SMD Freescale board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MACH_TYPE MACH_TYPE_MX53_SMD - -#include <asm/arch/imx-regs.h> - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -#define CONFIG_SYS_FSL_CLK - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) - -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 1 - -/* Eth Configs */ -#define CONFIG_HAS_ETH1 - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - -/* Command definition */ - -#define CONFIG_ETHPRIME "FEC0" - -#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "uimage=uImage\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm\0" \ - "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" -#define CONFIG_ARP_TIMEOUT 200UL - -/* Miscellaneous configurable options */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Physical Memory Map */ -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) -#define PHYS_SDRAM_2 CSD1_BASE_ADDR -#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024) -#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) - -#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* environment organization */ - -#endif /* __CONFIG_H */