Prepare to use ADC channel 1 in JetHub D1 (j100) to check the hardware revision of the board.
- add support for AXG in saradc driver - add simple clk-ao driver for AXG (base is taken from g12a) - enable saradc in dts and board config file - fix typo in the g12a-clk-ao driver name - move clk->id check to .request function for g12a-clk-ao driver - enable saradc in dts/board config for JetHub D1 (j100)
From v1:
- move clk-id check to .request function for axg/g12a-ao clk driver
Vyacheslav Bocharov (6): clk: meson: add minimal driver for axg-ao clocks clk: meson: fix driver name for g12a-ao clocks clk: meson: update driver for g12a-ao clocks adc: meson-saradc: add AXG variant board: amlogic: jethub j100: enable saradc in dts board: amlogic: jethub j100: enable saradc in config
.../arm/dts/meson-axg-jethome-jethub-j100.dts | 5 ++ configs/jethub_j100_defconfig | 5 ++ drivers/adc/meson-saradc.c | 2 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/axg-ao.c | 89 +++++++++++++++++++ drivers/clk/meson/g12a-ao.c | 14 ++- 6 files changed, 112 insertions(+), 4 deletions(-) create mode 100644 drivers/clk/meson/axg-ao.c