On the Raspberry Pi 4, after a PCI reset, VL805's (a xHCI chip) firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideCore (the SoC's co-processor). Introduce the function that informs VideCore that VL805 may need its firmware loaded.
Signed-off-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de
--- Changes since v1: - Rename function so it's not mistaken with regular firmware loading
arch/arm/mach-bcm283x/include/mach/mbox.h | 13 +++++++ arch/arm/mach-bcm283x/include/mach/msg.h | 7 ++++ arch/arm/mach-bcm283x/msg.c | 46 +++++++++++++++++++++++ 3 files changed, 66 insertions(+)
diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h index 60e226ce1d..2ae2d3d97c 100644 --- a/arch/arm/mach-bcm283x/include/mach/mbox.h +++ b/arch/arm/mach-bcm283x/include/mach/mbox.h @@ -491,6 +491,19 @@ struct bcm2835_mbox_tag_set_palette { } body; };
+#define BCM2835_MBOX_TAG_NOTIFY_XHCI_RESET 0x00030058 + +struct bcm2835_mbox_tag_pci_dev_addr { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + u32 dev_addr; + } req; + struct { + } resp; + } body; +}; + /* * Pass a raw u32 message to the VC, and receive a raw u32 back. * diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h index 4afb08631b..e45c1bf010 100644 --- a/arch/arm/mach-bcm283x/include/mach/msg.h +++ b/arch/arm/mach-bcm283x/include/mach/msg.h @@ -48,4 +48,11 @@ int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp, int pixel_order, int alpha_mode, ulong *fb_basep, ulong *fb_sizep, int *pitchp);
+/** + * bcm2711_load_vl805_firmware() - get vl805's firmware loaded + * + * @return 0 if OK, -EIO on error + */ +int bcm2711_notify_vl805_reset(void); + #endif diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c index 94b75283f8..347aece3cd 100644 --- a/arch/arm/mach-bcm283x/msg.c +++ b/arch/arm/mach-bcm283x/msg.c @@ -7,6 +7,7 @@ #include <memalign.h> #include <phys2bus.h> #include <asm/arch/mbox.h> +#include <linux/delay.h>
struct msg_set_power_state { struct bcm2835_mbox_hdr hdr; @@ -40,6 +41,12 @@ struct msg_setup { u32 end_tag; };
+struct msg_notify_vl805_reset { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_pci_dev_addr dev_addr; + u32 end_tag; +}; + int bcm2835_power_on_module(u32 module) { ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1); @@ -151,3 +158,42 @@ int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp,
return 0; } + +/* + * On the Raspberry Pi 4, after a PCI reset, VL805's (the xHCI chip) firmware + * may either be loaded directly from an EEPROM or, if not present, by the + * SoC's VideoCore. This informs VideoCore that VL805 needs its firmware + * loaded. + */ +int bcm2711_notify_vl805_reset(void) +{ + ALLOC_CACHE_ALIGN_BUFFER(struct msg_notify_vl805_reset, + msg_notify_vl805_reset, 1); + int ret; + + BCM2835_MBOX_INIT_HDR(msg_notify_vl805_reset); + BCM2835_MBOX_INIT_TAG(&msg_notify_vl805_reset->dev_addr, + NOTIFY_XHCI_RESET); + + /* + * The pci device address is expected like this: + * + * PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12 + * + * But since RPi4's PCIe setup is hardwired, we know the address in + * advance. + */ + msg_notify_vl805_reset->dev_addr.body.req.dev_addr = 0x100000; + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, + &msg_notify_vl805_reset->hdr); + if (ret) { + printf("bcm2711: Faild to load vl805's firmware, %d\n", ret); + return -EIO; + } + + udelay(200); + + return 0; +} +