On 17/12/2018 21:34, Adam Ford wrote:
Borrowing from the updates to ti-musb.c, this glue layer checks to see if the MUSB controller is gadget or host. Going under the assumpution there is only one MUSB controller, this only builds either the host probe or the gadget probe. OTG would be preferred, but it doesn't appear to be working yet.
You can support both host and periph mode at the same time:
Create a new driver (a MISC UCLASS for ex) compatible with ti,omap3-musb.
Provide a bind function. In this function check the value of dr_mode and bind the appropriate child driver (host or peripheral).
This is how it is done in ti-musb.c.
JJ
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c index b6e1320538..780d21c693 100644 --- a/drivers/usb/musb-new/omap2430.c +++ b/drivers/usb/musb-new/omap2430.c @@ -203,7 +203,7 @@ static int omap2430_musb_ofdata_to_platdata(struct udevice *dev) return 0; }
-#ifdef CONFIG_USB_MUSB_HOST +#ifndef CONFIG_USB_MUSB_GADGET static int omap2430_musb_probe(struct udevice *dev) { struct musb_host_data *host = dev_get_priv(dev); @@ -241,7 +241,7 @@ static int omap2430_musb_remove(struct udevice *dev) #if CONFIG_IS_ENABLED(OF_CONTROL) static int omap2430_musb_host_ofdata_to_platdata(struct udevice *dev) {
- struct ti_musb_platdata *platdata = dev_get_platdata(dev);
- struct omap2430_musb_platdata *platdata = dev_get_platdata(dev); const void *fdt = gd->fdt_blob; int node = dev_of_offset(dev); int ret;
@@ -272,6 +272,83 @@ U_BOOT_DRIVER(omap2430_musb) = { .priv_auto_alloc_size = sizeof(struct musb_host_data), };
+#else
+struct omap2430_musb_peripheral {
- struct musb *periph;
+};
+#if CONFIG_IS_ENABLED(OF_CONTROL) +static int omap2430_musb_peripheral_ofdata_to_platdata(struct udevice *dev) +{
- struct ti_musb_platdata *platdata = dev_get_platdata(dev);
- const void *fdt = gd->fdt_blob;
- int node = dev_of_offset(dev);
- int ret;
- ret = omap2430_musb_ofdata_to_platdata(dev);
- if (ret) {
pr_err("platdata dt parse error\n");return ret;- }
- platdata->plat.mode = MUSB_PERIPHERAL;
- return 0;
+} +#endif
+int dm_usb_gadget_handle_interrupts(struct udevice *dev) +{
- struct omap2430_musb_peripheral *priv = dev_get_priv(dev);
- priv->periph->isr(0, priv->periph);
- return 0;
+}
+static int omap2430_musb_peripheral_probe(struct udevice *dev) +{
- struct omap2430_musb_peripheral *priv = dev_get_priv(dev);
- struct omap2430_musb_platdata *platdata = dev_get_platdata(dev);
- struct omap_musb_board_data *otg_board_data;
- int ret;
- otg_board_data = &platdata->otg_board_data;
- priv->periph = musb_init_controller(&platdata->plat,
(struct device *)otg_board_data,platdata->base);- if (!priv->periph)
return -EIO;- /* ti_musb_set_phy_power(dev, 1); */
- musb_gadget_setup(priv->periph);
- return usb_add_gadget_udc((struct device *)dev, &priv->periph->g);
+}
+static int omap2430_musb_peripheral_remove(struct udevice *dev) +{
- struct omap2430_musb_peripheral *priv = dev_get_priv(dev);
- usb_del_gadget_udc(&priv->periph->g);
- /* ti_musb_set_phy_power(dev, 0); */
- return 0;
+}
+U_BOOT_DRIVER(omap2430_musb_peripheral) = {
- .name = "ti-musb-peripheral",
- .id = UCLASS_USB_GADGET_GENERIC,
- .of_match = omap2430_musb_ids,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
- .ofdata_to_platdata = omap2430_musb_peripheral_ofdata_to_platdata,
+#endif
- .probe = omap2430_musb_peripheral_probe,
- .remove = omap2430_musb_peripheral_remove,
- .ops = &musb_usb_ops,
- .platdata_auto_alloc_size = sizeof(struct omap2430_musb_platdata),
- .priv_auto_alloc_size = sizeof(struct omap2430_musb_peripheral),
- .flags = DM_FLAG_PRE_RELOC,
+}; #endif
#endif /* CONFIG_IS_ENABLED(DM_USB) */