[U-Boot-Users] U-boot and Stratix development board Issue

Hello,

I would like to know if someone has already encountered this problem. I cannot execute this command : loadb 800000 using kermit protocol in order to transfer a file to the RAM. It waits during a while and after, the transfer is canceled.

U-boot has been compiled for the Stratix Edition dev. board using the Nios processor (standard 32).

I can transfer and execute u-boot.srec by using this command : nios-run -r u- boot.srec.

After, I execute hyperterminal in order to transfer u-boot.bin and copy it to the FLASH.

Unfortunately, I cannot use loadb... :-(

Any idea?

Regards

Christian