Hi Lukasz,
On Thu, Aug 15, 2024 at 5:14 PM Lukasz Majewski lukma@denx.de wrote:
Unfortunately not - this change is only for properly setting start address of the u-boot.
The _real_ problem here is the symbol placement generated by binman when we try to define the image as a single one.
Moreover, this change follows other boards with imx8mm processor - ./configs/imx8mm_beacon_fspi_defconfig to be specific.
The "fix" (for which I'd been now probably opt) for this issue would be to generate two images with binman - one for u-boot-spl-ddr.bin and the final flash.bin with the former one included (as it was before SHA1: 37e50627efacd8dae18b564e9d8886a033e181bc)
Is QSPI boot broken on i.MX8MM?
I am adding Adam and Mamta who have tested QSPI booting on imx8mm_beacon and imx8mm_evk, respectively.