Hi Marek,
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
Signed-off-by: Lukasz Majewski lukma@denx.de
The tags should be ARM: imx: ...
The commit message is missing.
include/configs/kp_imx6q_tpc.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index b6b27ee1d5..ee9c56bc21 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -89,11 +89,32 @@ "rdinit=/sbin/init\0" \ "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \ "fit_config=mx6q_tpc70_conf\0" \
- "uboot_file=u-boot.img\0" \
- "SPL_file=SPL\0" \
- "wic_file=kp-image-kpimx6qtpc.wic\0" \
Why don't you just generate a fitImage and use the fitupd for this ?
This is one of possible solutions - yes.
"upd_image=st.4k\0" \ "updargs=setenv bootargs console=${console} ${smp}"\ "rdinit=${rdinit} ${debug} ${displayargs}\0" \ "loadusb=usb start; " \ "fatload usb 0 ${loadaddr} ${upd_image}\0" \
- "upd_uboot_sd=" \
"if tftp ${loadaddr} ${uboot_file}; then " \"setexpr blkc ${filesize} / 0x200;" \"setexpr blkc ${blkc} + 1;" \"mmc write ${loadaddr} 0x8A ${blkc};" \"fi;\0" \- "upd_SPL_sd=" \
"if tftp ${loadaddr} ${SPL_file}; then " \"setexpr blkc ${filesize} / 0x200;" \"setexpr blkc ${blkc} + 1;" \"mmc write ${loadaddr} 0x2 ${blkc};" \"fi;\0" \- "upd_wic=" \
"if tftp ${loadaddr} ${wic_file}; then " \"setexpr blkc ${filesize} / 0x200;" \"setexpr blkc ${blkc} + 1;" \"mmc write ${loadaddr} 0x0 ${blkc};" \"fi;\0" \
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de