On Tue, 25 May 2021 00:30:21 +0100 Andre Przywara andre.przywara@arm.com wrote:
Hi,
thanks to Jaehoon for reviewing some patches in here!
Can anyone else please have a look at this series? I am tempted to push them in the upcoming merge window, to expose them to a wider testing audience, but would really like to have some people's eyes on it.
Also testing this on different boards would be much appreciated, especially patch 7/8 deserves some scrutiny, I guess.
Thanks! Andre
While debugging some eMMC problem on the H616 SoC, I stumbled upon some weird code in the Allwinner MMC driver. Some closer inspection and some help from Ondrej later this series of fixes emerged: Some patches remove part of the #ifdef hell we needlessly had in the driver. A big chunk is around the "new timing mode", which all "newer" SoCs (since around 2015) have, and which requires some extra bit to be set. We didn't enable this mode for all SoCs, this is now fixed in patches 3-6. Patch 7 fixes a big performance problem we had due to using MMIO accesses for the actual data transfer, as opposed to DMA transfers used in Linux. Short from adding a lot of code to use DMA as well, we can actually halve the number of MMIO accesses on reads, effectively doubling the bus transfer performance. This helps the H6 a lot, but also improves the eMMC read performance. The final patch makes use of some generic MMC DT code, to parse generic DT properties. This allows us to remove sunxi specific code, but also adds support for "broken-cd" and more advanced MMC speed modes.
Please have a look and test this code on as many boards as possible. While a performance increase is nice, we don't want to risk data integrity over this, so please try to verify that it still works for you.
Cheers, Andre.
P.S. Patches 5 and 6 use different approaches to differentiate between SoCs specific quirks: Patch 5/8 selects an explicit symbol from the SoC specific sections in our Kconfig file, while patch 6/8 compares the selected SoC type in the C code. Please let me know which approach is better, I can then use this for both patches (and in the future).
Andre Przywara (8): mmc: sunxi: Avoid #ifdefs in delay and width setup mmc: sunxi: Fix warnings with CONFIG_PHYS_64BIT mmc: sunxi: Fix MMC clock parent selection mmc: sunxi: Cleanup "new timing mode" selection mmc: sunxi: Enable "new timing mode" on all new SoCs mmc: sunxi: Cleanup and fix self-calibration code mmc: sunxi: Increase MMIO FIFO read performance mmc: sunxi: Use mmc_of_parse()
.../include/asm/arch-sunxi/clock_sun50i_h6.h | 2 +- arch/arm/include/asm/arch-sunxi/mmc.h | 1 + arch/arm/mach-sunxi/Kconfig | 3 + drivers/mmc/sunxi_mmc.c | 160 +++++++++++------- 4 files changed, 102 insertions(+), 64 deletions(-)