On Mon, Apr 30, 2018 at 04:46:13PM +0000, Michal Simek wrote:
Dne po, 30. dub 2018 16:22 uživatel Tom Rini trini@konsulko.com napsal:
On Mon, Apr 30, 2018 at 11:02:24AM +0200, Michal Simek wrote:
Hi Tom,
On 19.4.2018 09:07, Siva Durga Prasad Paladugu wrote:
This patch series is meant to add SD3.0 support for ZynqMP platform. The first five patches in the series mostly setting up things in sdhci layer to support SD3.0 , the sixth patch is to add SD3.0 support for ZynqMP platform and the last patch is to enable this support for ZynqMP zcu102 rev1.0 eval board.
Siva Durga Prasad Paladugu (7): mmc: sdhci: Add support for disabling clock mmc: sdhci: Handle execute tuning command in sdhci_send_command sdhci: Add new sdhci ops for platform specific tuning and delays mmc: sdhci: Invoke platform specific tuning and delay routines mmc : sdhci: Read capabilities register1 and update host caps mmc: zynq_sdhci: Add support for SD3.0 zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
board/xilinx/zynqmp/Makefile | 2 + board/xilinx/zynqmp/tap_delays.c | 229
+++++++++++++++++++++++++
configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 2 + drivers/mmc/sdhci.c | 63 ++++++- drivers/mmc/zynq_sdhci.c | 231
+++++++++++++++++++++++++-
include/sdhci.h | 8 + include/zynqmp_tap_delay.h | 20 +++ 7 files changed, 547 insertions(+), 8 deletions(-) create mode 100644 board/xilinx/zynqmp/tap_delays.c create mode 100644 include/zynqmp_tap_delay.h
It looks like that Jaehoon is out or busy with something else. Can you please recommend someone to take a look at these patches? Definitely feel free to look at it self.
Are these things that need to come in for v2018.05 to fix regressions or new support? Thanks!
New support.
Then yes, assuming Jaehoon doesn't pick it up shortly after v2018.05 feel free to grab it for one of your trees, thanks!