Update register address for i.MX6 SLL
Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-mx6/imx-regs.h | 77 +++++++++++++++++++++----------- 1 file changed, 50 insertions(+), 27 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 8bb36eb..6727c56 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -26,7 +26,7 @@ #define APBH_DMA_ARB_END_ADDR 0x0180BFFF #define M4_BOOTROM_BASE_ADDR 0x007F8000
-#else +#elif !defined(CONFIG_MX6SLL) #define CAAM_ARB_BASE_ADDR 0x00100000 #define CAAM_ARB_END_ADDR 0x00103FFF #define APBH_DMA_ARB_BASE_ADDR 0x00110000 @@ -46,13 +46,9 @@ #define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
/* GPV - PL301 configuration ports */ -#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)) +#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \ + defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)) #define GPV2_BASE_ADDR 0x00D00000 -#else -#define GPV2_BASE_ADDR 0x00200000 -#endif - -#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)) #define GPV3_BASE_ADDR 0x00E00000 #define GPV4_BASE_ADDR 0x00F00000 #define GPV5_BASE_ADDR 0x01000000 @@ -61,6 +57,7 @@ #define PCIE_ARB_END_ADDR 0x08FFFFFF
#else +#define GPV2_BASE_ADDR 0x00200000 #define GPV3_BASE_ADDR 0x00300000 #define GPV4_BASE_ADDR 0x00800000 #define PCIE_ARB_BASE_ADDR 0x01000000 @@ -96,7 +93,7 @@ #define WEIM_ARB_END_ADDR 0x57FFFFFF #define QSPI0_AMBA_BASE 0x60000000 #define QSPI0_AMBA_END 0x6FFFFFFF -#else +#elif !defined(CONFIG_MX6SLL) #define SATA_ARB_BASE_ADDR 0x02200000 #define SATA_ARB_END_ADDR 0x02203FFF #define OPENVG_ARB_BASE_ADDR 0x02204000 @@ -111,7 +108,8 @@ #define WEIM_ARB_END_ADDR 0x0FFFFFFF #endif
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)) +#if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \ + defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)) #define MMDC0_ARB_BASE_ADDR 0x80000000 #define MMDC0_ARB_END_ADDR 0xFFFFFFFF #define MMDC1_ARB_BASE_ADDR 0xC0000000 @@ -141,19 +139,21 @@ #define ECSPI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x0C000) #define ECSPI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x10000) #define ECSPI4_BASE_ADDR (ATZ1_BASE_ADDR + 0x14000) -#ifdef CONFIG_MX6SL -#define UART5_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) -#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000) -#define UART2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) -#define SSI1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000) -#define SSI2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000) -#define SSI3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) -#define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) -#define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000) -#else + +#define MX6SL_UART5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) +#define MX6SLL_UART4_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) +#define MX6UL_UART7_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) +#define MX6SL_UART2_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) +#define MX6SLL_UART2_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) +#define MX6UL_UART8_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) +#define MX6SL_UART3_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) +#define MX6SLL_UART3_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) +#define MX6SL_UART4_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000) + #ifndef CONFIG_MX6SX #define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) #endif +#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000) #define UART1_BASE (ATZ1_BASE_ADDR + 0x20000) #define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) #define UART8_BASE (ATZ1_BASE_ADDR + 0x24000) @@ -161,7 +161,6 @@ #define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000) #define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) #define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) -#endif
#ifndef CONFIG_MX6SX #define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000) @@ -176,6 +175,8 @@ #define PWM4_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0xC000) #define CAN1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x10000) #define CAN2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x14000) +/* QOSC on i.MX6SLL */ +#define QOSC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x14000) #define GPT1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x18000) #define GPIO1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x1C000) #define GPIO2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x20000) @@ -198,11 +199,18 @@ #define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x58000) #define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000) #define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000) -#ifdef CONFIG_MX6SL +#define IOMUXC_GPR_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) +#ifdef CONFIG_MX6SLL +#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) +#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#define PXP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000) +#define EPDC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x74000) +#define DCP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x7C000) +#elif defined(CONFIG_MX6SL) #define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) #define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) -#elif CONFIG_MX6SX +#elif defined(CONFIG_MX6SX) #define CANFD1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define SDMA_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) #define CANFD2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000) @@ -215,6 +223,9 @@ #define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) #endif
+#define MX6SL_LCDIF_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x78000) +#define MX6SLL_LCDIF_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x78000) + #define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000) #define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000) #define AIPS3_ON_BASE_ADDR (ATZ3_BASE_ADDR + 0x7C000) @@ -249,7 +260,7 @@ #define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000) #define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000) #define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000) -/* i.MX6SL */ +/* i.MX6SL/SLL */ #define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) #ifdef CONFIG_MX6UL #define ENET2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000) @@ -263,6 +274,10 @@ #define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000) #define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000) #define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000) +#ifdef CONFIG_MX6SLL +#define IOMUXC_GPR_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000) +#define IOMUXC_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) +#endif #define IP2APB_PERFMON1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000) #define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) #define MX6UL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) @@ -296,6 +311,8 @@ #define I2C4_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000) #define IP2APB_USBPHY1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000) #define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000) +/* i.MX6SLL */ +#define MTR_MASTER_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
#ifdef CONFIG_MX6SX #define GIS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x04000) @@ -334,7 +351,8 @@ #define MX6SX_LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000) #define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
-#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)) +#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \ + defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL)) #define IRAM_SIZE 0x00040000 #else #define IRAM_SIZE 0x00020000 @@ -348,10 +366,14 @@ /* only for i.MX6SX/UL */ #define WDOG3_BASE_ADDR ((is_mx6ul() ? \ MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR)) -#define LCDIF1_BASE_ADDR ((is_mx6ul()) ? \ +#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6SLL)) ? \ + MX6SLL_LCDIF_BASE_ADDR : \ + (is_cpu_type(MXC_CPU_MX6SL)) ? \ + MX6SL_LCDIF_BASE_ADDR : \ + ((is_cpu_type(MXC_CPU_MX6UL)) ? \ MX6UL_LCDIF1_BASE_ADDR : \ ((is_mx6ull()) ? \ - MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)) + MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)))
extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac); @@ -672,7 +694,8 @@ struct cspi_regs { #define MXC_CSPICON_POL 4 /* SCLK polarity */ #define MXC_CSPICON_SSPOL 12 /* SS polarity */ #define MXC_CSPICON_CTL 20 /* inactive state of SCLK */ -#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL) +#if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \ + defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL) #define MXC_SPI_BASE_ADDRESSES \ ECSPI1_BASE_ADDR, \ ECSPI2_BASE_ADDR, \