On Thu, May 16, 2019 at 10:10 PM Baruch Siach baruch@tkos.co.il wrote:
Document the main U-Boot image offset when booting from SATA disk on the Clearfog board.
Signed-off-by: Baruch Siach baruch@tkos.co.il
Reviewed-by: Chris Packham judge.packham@gmail.com
board/solidrun/clearfog/README | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 0b0e98de90a0..6171ce66f4f8 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -40,6 +40,12 @@ Install U-Boot on eMMC boot partition from Linux running on Clearfog: Note that the SD card is not accessible when the Clearfog SOM has eMMC. Consider initial boot from UART (see below).
+Install U-Boot on SATA: +-----------------------
+When loading the main U-Boot image from raw SATA sector, set +CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR to 0x141.
Boot selection:
-- 2.20.1
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot