-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Wolfgang Denk wrote:
You cannot just use a configuration for one board and expect it to work on a different board.
My board is not as different to ml300 as one may think - indeed, it uses the same Virtex2Pro FPGA with nearly the same configuration (wrt. UART, I2C, EMAC). Therefore using ml300 as a starting point for my design really makes sense. Of course I used the BSP compiled for my board using Xilinx EDK 7.1
You missed to port U-Boot to your hardware. Go back to square 0. Read the README (porting guide section) and do what needs to be done.
Well - I _did_ port it (in the sense of using the appropriate BSP) - however, I modified ML300 source instead of creating a new board-directory ...
in the ./lib_i386/board.c, however, there is no appropriate warning in
What has the x86 code to do with that? [Nothing!]
Well - nothing - your are right - instead of the comment, that the PowerPC code may hang immediatley _after_ "DRAM:" printout. This led me to the assumption, that my problem may be well known ...
Best regards,
Thorsten
- -- IfEN - Gesellschaft für Satellitennavigation mbH
Dipl. Ing. Thorsten Lück Tel.: +49 8121 2238-25 Fax : +49 8121 2238-11