Dear Anand,
On 1/22/20 9:06 PM, Anand Moon wrote:
As per mainline line kernel fix the clk tunig phase for mmc, set Core=180, Tx=180, Rx=0 clk phase for mmc initialization. As per S905X and S922X datasheet set the default values for clk tuning.
Signed-off-by: Anand Moon linux.amoon@gmail.com
Changes from previous v3 Fix the initialization of core clk tunning phase as per datasheet. Fix the commit message.
v2: Fix the clk phase macro to support PHASE_180 drop the wrong CLK_CORE_PHASE_MASK macro.
v1: use the mainline kernel tuning for clk tuning.
Fixed the commmit messages. Patch v1: https://protect2.fireeye.com/url?k=c4a34ac1-9973420d-c4a2c18e-000babff3793-f...
Before these changes. clock is enabled (380953Hz) clock is enabled (25000000Hz) After these changes clock is enabled (380953Hz) clock is enabled (25000000Hz) clock is enabled (52000000Hz) Test on Odroid N2 and Odroid C2 with eMMC and microSD cards
arch/arm/include/asm/arch-meson/sd_emmc.h | 11 ++----- drivers/mmc/meson_gx_mmc.c | 38 +++++++++++++++++++---- 2 files changed, 35 insertions(+), 14 deletions(-)
diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h b/arch/arm/include/asm/arch-meson/sd_emmc.h index e3a72c8b66..c193547aad 100644 --- a/arch/arm/include/asm/arch-meson/sd_emmc.h +++ b/arch/arm/include/asm/arch-meson/sd_emmc.h @@ -7,6 +7,7 @@ #define __SD_EMMC_H__
#include <mmc.h> +#include <linux/bitops.h>
#define SDIO_PORT_A 0 #define SDIO_PORT_B 1 @@ -19,14 +20,8 @@ #define CLK_MAX_DIV 63 #define CLK_SRC_24M (0 << 6) #define CLK_SRC_DIV2 (1 << 6) -#define CLK_CO_PHASE_000 (0 << 8) -#define CLK_CO_PHASE_090 (1 << 8) -#define CLK_CO_PHASE_180 (2 << 8) -#define CLK_CO_PHASE_270 (3 << 8) -#define CLK_TX_PHASE_000 (0 << 10) -#define CLK_TX_PHASE_090 (1 << 10) -#define CLK_TX_PHASE_180 (2 << 10) -#define CLK_TX_PHASE_270 (3 << 10) +#define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l)))
#define CLK_ALWAYS_ON BIT(24)
#define MESON_SD_EMMC_CFG 0x44 diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c index 86c1a7164a..67b1b075ab 100644 --- a/drivers/mmc/meson_gx_mmc.c +++ b/drivers/mmc/meson_gx_mmc.c @@ -51,12 +51,38 @@ static void meson_mmc_config_clock(struct mmc *mmc) } clk_div = DIV_ROUND_UP(clk, mmc->clock);
- /* 180 phase core clock */
- meson_mmc_clk |= CLK_CO_PHASE_180;
- /* 180 phase tx clock */
- meson_mmc_clk |= CLK_TX_PHASE_000;
- /* Clock divider */
- meson_mmc_clk = GENMASK(5, 0);
- /* Clock source 1: Fix PLL, 1000MHz */
- meson_mmc_clk |= UPDATE(1, 7, 6);
- /* Core clock phase 2:180 */
- meson_mmc_clk |= UPDATE(2, 9, 8);
- /* TX clock phase 2:180 */
- meson_mmc_clk |= UPDATE(2, 11, 10);
- /* RX clock phase 0:180 */
- meson_mmc_clk |= UPDATE(0, 13, 12);
+#ifdef CONFIG_MESON_GX
- /* TX clock delay line */
- meson_mmc_clk |= GENMASK(19, 16);
- /* RX clock delay line */
- meson_mmc_clk |= GENMASK(23, 20);
- /* clk always on */
- meson_mmc_clk |= BIT(20);
- /* clk irq sdio sleep */
- meson_mmc_clk |= BIT(25);
Could you define the macro instead of BIT(x)? It's helpful to know what its bit is used.
e.g) #define CLK_ALWAYS_ON BIT(20)
i didn't know that BIT(20)/(25) are defined as what purpose has.
Best Regards, Jaehoon Chung
+#endif +#if (defined(CONFIG_MESON_AXG) || defined(CONFIG_MESON_G12A))
- /* TX clock delay line */
- meson_mmc_clk |= GENMASK(21, 16);
- /* RX clock delay line */
- meson_mmc_clk |= GENMASK(27, 22);
- /* clk always on */
- meson_mmc_clk |= BIT(28);
- /* clk irq sdio sleep */
- meson_mmc_clk |= BIT(29);
- /* clk irq sdio sleep_ds */
- meson_mmc_clk |= BIT(30);
+#endif /* clock settings */ meson_mmc_clk |= clk_src; meson_mmc_clk |= clk_div;