Subject: [PATCH] imx8mq_evk: Update the required ATF branch
Following the README instructions leads to a non-booting U-Boot:
U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300) PMIC: PFUZE100 ID=0x10 DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Trying to boot from MMC2
(It hangs here)
Use the "imx_4.19.35_1.0.0" ATF branch instead, which fixes such problem and allow the boot to complete again.
Suggested-by: Adam Ford aford173@gmail.com Signed-off-by: Fabio Estevam festevam@gmail.com
Acked-by: Peng Fan peng.fan@nxp.com
board/freescale/imx8mq_evk/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README index c1d400bcf9..4f671b069c 100644 --- a/board/freescale/imx8mq_evk/README +++ b/board/freescale/imx8mq_evk/README @@ -11,7 +11,7 @@ Get and Build the ARM Trusted firmware ====================================== Note: srctree is U-Boot source directory Get ATF from: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource .codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&data=02%7C01%7Cpen g.fan%40nxp.com%7C15caa498b49343fabede08d77e40facf%7C686ea1d3bc 2b4c6fa92cd99c5c301635%7C0%7C0%7C637116689861712196&sdata =GNw4g1oDo9ceM1VIEB9A11716fQQF1GNzpJ4L3n8FTM%3D&reserved =0 -branch: imx_4.14.62_1.0.0_beta +branch: imx_4.19.35_1.0.0 $ make PLAT=imx8mq bl31 $ cp build/imx8mq/release/bl31.bin $(srctree)
-- 2.17.1