Hello again,
successfully compiled U-boot-arm.git source under bare-metal Linux on Banana Pi itself (not FreeBSD 64-bit VM). But still getting troubles at:
U-Boot SPL 2014.10-rc1 (Aug 26 2014 - 03:39:46) DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
U-Boot 2014.10-rc1 (Aug 26 2014 - 03:39:46) Allwinner Technology
CPU: Allwinner A20 (SUN7I) I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial SCSI: SUNXI SCSI INIT SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: dwmac.1c50000 sun7i#
Yes, I know I should type here: fatload mmc 0 0x40200000 kernel; go 0x40200100 to load my FreeBSD 10.x kernel, however my serial console over J11 is read-only..
The only thing I don't uderstand why new loader ignores my boot.scr file? Tried FAT16, FAT32..
To be clear: #U-boot loader writing to image dd if=/root/banana/u-boot-arm_git/u-boot-sunxi-with-spl.bin conv=notrunc of=banana.img bs=1024 seek=8 #mkimage tools used from Lemaker's git echo "fatload mmc 0 0x40200000 kernel; go 0x40200100" > boot.cmd /usr/src/u-boot-bananapi/tools/mkimage -C none -A arm -T script -d boot.cmd boot.scr #but the same result for u-boot-arm.git tool
Best regards, TooMeeK