We should explicitly load DTB from TFTP server or MMC/SD card for Linux booting. This will allow us: 1. To use different Linux DTB for SiFive Unleashed board with expansion board connected. 2. Avoid re-flashing OpenSBI firmware whenever board connections change.
This patch updates reference bootlog in SiFive FU540 README as-per above.
Signed-off-by: Anup Patel anup.patel@wdc.com Reviewed-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Joe Hershberger joe.hershberger@ni.com --- doc/README.sifive-fu540 | 317 ++++++++++++++++++++++++---------------- 1 file changed, 191 insertions(+), 126 deletions(-)
diff --git a/doc/README.sifive-fu540 b/doc/README.sifive-fu540 index 944ba1c8a0..a106c9206f 100644 --- a/doc/README.sifive-fu540 +++ b/doc/README.sifive-fu540 @@ -59,41 +59,64 @@ Once you plugin the sdcard and power up, you should see the U-Boot prompt.
Sample boot log from HiFive Unleashed board =========================================== -U-Boot 2019.07-rc4-00013-g1837f893b0 (Jun 20 2019 - 11:08:48 +0530) +U-Boot 2019.07-00024-g350ff02f5b (Jul 22 2019 - 11:45:02 +0530)
CPU: rv64imafdc Model: SiFive HiFive Unleashed A00 DRAM: 8 GiB +MMC: spi@10050000:mmc@0: 0 In: serial@10010000 Out: serial@10010000 Err: serial@10010000 Net: eth0: ethernet@10090000 Hit any key to stop autoboot: 0 => version -U-Boot 2019.07-rc4-00013-g1837f893b0 (Jun 20 2019 - 11:08:48 +0530) +U-Boot 2019.07-00024-g350ff02f5b (Jul 22 2019 - 11:45:02 +0530)
riscv64-linux-gcc.br_real (Buildroot 2018.11-rc2-00003-ga0787e9) 8.2.0 GNU ld (GNU Binutils) 2.31.1 -=> -=============================================================================== +=> mmc info +Device: spi@10050000:mmc@0 +Manufacturer ID: 3 +OEM: 5344 +Name: SU08G +Bus Speed: 20000000 +Mode: SD Legacy +Rd Block Len: 512 +SD version 2.0 +High Capacity: Yes +Capacity: 7.4 GiB +Bus Width: 1-bit +Erase Group Size: 512 Bytes +=> mmc part
-Now you can configure your networking, tftp server and use tftp boot method to -load uImage. +Partition Map for MMC device 0 -- Partition Type: EFI
-========================================================================== -=> setenv ipaddr 10.206.5.241 +Part Start LBA End LBA Name + Attributes + Type GUID + Partition GUID + 1 0x00000800 0x000107ff "bootloader" + attrs: 0x0000000000000000 + type: 2e54b353-1271-4842-806f-e436d6af6985 + guid: 393bbd36-7111-491c-9869-ce24008f6403 + 2 0x00040800 0x00ecdfde "" + attrs: 0x0000000000000000 + type: 0fc63daf-8483-4772-8e79-3d69d8477de4 + guid: 7fc9a949-5480-48c7-b623-04923080757f +=> setenv ipaddr 10.206.7.133 => setenv netmask 255.255.252.0 => setenv serverip 10.206.4.143 => setenv gateway 10.206.4.1 -=> tftpboot ${kernel_addr_r} /sifive/fu540/uImage +=> tftpboot ${kernel_addr_r} /sifive/fu540/Image ethernet@10090000: PHY present at 0 ethernet@10090000: Starting autonegotiation... ethernet@10090000: Autonegotiation complete -ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00) +ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00) Using ethernet@10090000 device -TFTP from server 10.206.4.143; our IP address is 10.206.5.241 -Filename '/sifive/fu540/uImage'. -Load address: 0x80600000 +TFTP from server 10.206.4.143; our IP address is 10.206.7.133 +Filename '/sifive/fu540/Image'. +Load address: 0x84000000 Loading: ################################################################# ################################################################# ################################################################# @@ -103,50 +126,77 @@ Loading: ################################################################# ################################################################# ################################################################# ################################################################# - ######################################## - 1.5 MiB/s + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ########################################## + 1.2 MiB/s done -Bytes transferred = 9162364 (8bce7c hex) +Bytes transferred = 8867100 (874d1c hex) => tftpboot ${ramdisk_addr_r} /sifive/fu540/uRamdisk ethernet@10090000: PHY present at 0 ethernet@10090000: Starting autonegotiation... ethernet@10090000: Autonegotiation complete -ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00) +ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00) Using ethernet@10090000 device -TFTP from server 10.206.4.143; our IP address is 10.206.5.241 +TFTP from server 10.206.4.143; our IP address is 10.206.7.133 Filename '/sifive/fu540/uRamdisk'. -Load address: 0x82500000 +Load address: 0x88300000 Loading: ################################################################# ################################################################# - ################################## - 448.2 KiB/s + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ################################################################# + ############## + 418.9 KiB/s done Bytes transferred = 2398272 (249840 hex) -=> setenv bootargs "root=/dev/ram rw console=ttySIF0 earlycon=sbi" -=> bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdtcontroladdr} -## Booting kernel from Legacy Image at 80600000 ... - Image Name: Linux - Image Type: RISC-V Linux Kernel Image (uncompressed) - Data Size: 9162300 Bytes = 8.7 MiB - Load Address: 80200000 - Entry Point: 80200000 - Verifying Checksum ... OK -## Loading init Ramdisk from Legacy Image at 82500000 ... +=> tftpboot ${fdt_addr_r} /sifive/fu540/hifive-unleashed-a00.dtb +ethernet@10090000: PHY present at 0 +ethernet@10090000: Starting autonegotiation... +ethernet@10090000: Autonegotiation complete +ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00) +Using ethernet@10090000 device +TFTP from server 10.206.4.143; our IP address is 10.206.7.133 +Filename '/sifive/fu540/hifive-unleashed-a00.dtb'. +Load address: 0x88000000 +Loading: ## + 1000 Bytes/s +done +Bytes transferred = 5614 (15ee hex) +=> setenv bootargs "root=/dev/ram rw console=ttySIF0 ip=dhcp earlycon=sbi" +=> booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r} +## Loading init Ramdisk from Legacy Image at 88300000 ... Image Name: Linux RootFS Image Type: RISC-V Linux RAMDisk Image (uncompressed) Data Size: 2398208 Bytes = 2.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK -## Flattened Device Tree blob at ff795730 - Booting using the fdt blob at 0xff795730 - Loading Kernel Image ... OK - Using Device Tree in place at 00000000ff795730, end 00000000ff799dac +## Flattened Device Tree blob at 88000000 + Booting using the fdt blob at 0x88000000 + Using Device Tree in place at 0000000088000000, end 00000000880045ed
Starting kernel ...
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 -[ 0.000000] Linux version 5.2.0-rc1-00003-gb9543e66e700 (anup@anup-lab-machine) (gcc version 8.2.0 (Buildroot 2018.11-rc2-00003-ga0787e9)) #1 SMP Thu Jun 20 11:41:26 IST 2019 +[ 0.000000] Linux version 5.3.0-rc1-00003-g460ac558152f (anup@anup-lab-machine) (gcc version 8.2.0 (Buildroot 2018.11-rc2-00003-ga0787e9)) #6 SMP Mon Jul 22 10:01:01 IST 2019 [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') [ 0.000000] printk: bootconsole [sbi0] enabled [ 0.000000] Initial ramdisk at: 0x(____ptrval____) (2398208 bytes) @@ -157,17 +207,18 @@ Starting kernel ... [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff] -[ 0.000000] software IO TLB: mapped [mem 0xfb795000-0xff795000] (64MB) +[ 0.000000] software IO TLB: mapped [mem 0xfbfff000-0xfffff000] (64MB) [ 0.000000] CPU with hartid=0 is not available [ 0.000000] CPU with hartid=0 is not available [ 0.000000] elf_hwcap is 0x112d -[ 0.000000] percpu: Embedded 17 pages/cpu s29592 r8192 d31848 u69632 +[ 0.000000] percpu: Embedded 18 pages/cpu s34584 r8192 d30952 u73728 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2067975 -[ 0.000000] Kernel command line: root=/dev/ram rw console=ttySIF0 earlycon=sbi -[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) -[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) +[ 0.000000] Kernel command line: root=/dev/ram rw console=ttySIF0 ip=dhcp earlycon=sbi +[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) +[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Sorting __ex_table... -[ 0.000000] Memory: 8182056K/8386560K available (5753K kernel code, 357K rwdata, 1804K rodata, 204K init, 808K bss, 204504K reserved, 0K cma-reserved) +[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off +[ 0.000000] Memory: 8182308K/8386560K available (5916K kernel code, 368K rwdata, 1840K rodata, 213K init, 304K bss, 204252K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. @@ -175,91 +226,105 @@ Starting kernel ... [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 [ 0.000000] plic: mapped 53 interrupts with 4 handlers for 9 contexts. -[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [2] +[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1] [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns -[ 0.000007] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns -[ 0.008553] Console: colour dummy device 80x25 -[ 0.012990] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) -[ 0.023103] pid_max: default: 32768 minimum: 301 -[ 0.028269] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) -[ 0.035068] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) -[ 0.042770] *** VALIDATE proc *** -[ 0.045610] *** VALIDATE cgroup1 *** -[ 0.049157] *** VALIDATE cgroup2 *** -[ 0.053743] rcu: Hierarchical SRCU implementation. -[ 0.058297] smp: Bringing up secondary CPUs ... -[ 0.064134] smp: Brought up 1 node, 4 CPUs -[ 0.069114] devtmpfs: initialized -[ 0.073281] random: get_random_u32 called from bucket_table_alloc.isra.10+0x4e/0x160 with crng_init=0 -[ 0.082157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns -[ 0.091634] futex hash table entries: 1024 (order: 4, 65536 bytes) -[ 0.098480] NET: Registered protocol family 16 -[ 0.114101] vgaarb: loaded -[ 0.116397] SCSI subsystem initialized -[ 0.120358] usbcore: registered new interface driver usbfs -[ 0.125541] usbcore: registered new interface driver hub -[ 0.130936] usbcore: registered new device driver usb -[ 0.136618] clocksource: Switched to clocksource riscv_clocksource -[ 0.148108] NET: Registered protocol family 2 -[ 0.152358] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) -[ 0.159928] TCP established hash table entries: 65536 (order: 7, 524288 bytes) -[ 0.169027] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) -[ 0.178360] TCP: Hash tables configured (established 65536 bind 65536) -[ 0.184653] UDP hash table entries: 4096 (order: 5, 131072 bytes) -[ 0.190819] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) -[ 0.197618] NET: Registered protocol family 1 -[ 0.201892] RPC: Registered named UNIX socket transport module. -[ 0.207395] RPC: Registered udp transport module. -[ 0.212159] RPC: Registered tcp transport module. -[ 0.216940] RPC: Registered tcp NFSv4.1 backchannel transport module. -[ 0.223445] PCI: CLS 0 bytes, default 64 -[ 0.227726] Unpacking initramfs... -[ 0.260556] Freeing initrd memory: 2336K -[ 0.264652] workingset: timestamp_bits=62 max_order=21 bucket_order=0 -[ 0.278452] NFS: Registering the id_resolver key type -[ 0.282841] Key type id_resolver registered -[ 0.287067] Key type id_legacy registered -[ 0.291155] nfs4filelayout_init: NFSv4 File Layout Driver Registering... -[ 0.298299] NET: Registered protocol family 38 -[ 0.302470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) -[ 0.309906] io scheduler mq-deadline registered -[ 0.314501] io scheduler kyber registered -[ 0.354134] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled -[ 0.360725] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 4, base_baud = 0) is a SiFive UART v0 -[ 0.369191] printk: console [ttySIF0] enabled -[ 0.369191] printk: console [ttySIF0] enabled -[ 0.377938] printk: bootconsole [sbi0] disabled -[ 0.377938] printk: bootconsole [sbi0] disabled -[ 0.387298] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 1, base_baud = 0) is a SiFive UART v0 -[ 0.396411] [drm] radeon kernel modesetting enabled. -[ 0.409818] loop: module loaded -[ 0.412606] libphy: Fixed MDIO Bus: probed -[ 0.416870] macb 10090000.ethernet: Registered clk switch 'sifive-gemgxl-mgmt' -[ 0.423570] macb: GEM doesn't support hardware ptp. -[ 0.428469] libphy: MACB_mii_bus: probed -[ 1.053009] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL) -[ 1.067548] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 7 (70:b3:d5:92:f2:f3) -[ 1.077330] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k -[ 1.083069] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. -[ 1.089061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver -[ 1.095485] ehci-pci: EHCI PCI platform driver -[ 1.099947] ehci-platform: EHCI generic platform driver -[ 1.105196] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver -[ 1.111286] ohci-pci: OHCI PCI platform driver -[ 1.115742] ohci-platform: OHCI generic platform driver -[ 1.121142] usbcore: registered new interface driver uas -[ 1.126269] usbcore: registered new interface driver usb-storage -[ 1.132331] mousedev: PS/2 mouse device common for all mice -[ 1.137978] usbcore: registered new interface driver usbhid -[ 1.143325] usbhid: USB HID core driver -[ 1.148022] NET: Registered protocol family 10 -[ 1.152609] Segment Routing with IPv6 -[ 1.155571] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver -[ 1.161927] NET: Registered protocol family 17 -[ 1.165907] Key type dns_resolver registered -[ 1.171694] Freeing unused kernel memory: 204K -[ 1.175375] This architecture does not have kernel memory protection. -[ 1.181792] Run /init as init process +[ 0.000006] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns +[ 0.008559] Console: colour dummy device 80x25 +[ 0.012989] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) +[ 0.023104] pid_max: default: 32768 minimum: 301 +[ 0.028273] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.035765] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) +[ 0.045307] rcu: Hierarchical SRCU implementation. +[ 0.049875] smp: Bringing up secondary CPUs ... +[ 0.055729] smp: Brought up 1 node, 4 CPUs +[ 0.060599] devtmpfs: initialized +[ 0.064819] random: get_random_u32 called from bucket_table_alloc.isra.10+0x4e/0x160 with crng_init=0 +[ 0.073720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns +[ 0.083176] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) +[ 0.090721] NET: Registered protocol family 16 +[ 0.106319] vgaarb: loaded +[ 0.108670] SCSI subsystem initialized +[ 0.112515] usbcore: registered new interface driver usbfs +[ 0.117758] usbcore: registered new interface driver hub +[ 0.123167] usbcore: registered new device driver usb +[ 0.128905] clocksource: Switched to clocksource riscv_clocksource +[ 0.141239] NET: Registered protocol family 2 +[ 0.145506] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) +[ 0.153754] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) +[ 0.163466] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) +[ 0.173468] TCP: Hash tables configured (established 65536 bind 65536) +[ 0.179739] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.186627] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) +[ 0.194117] NET: Registered protocol family 1 +[ 0.198417] RPC: Registered named UNIX socket transport module. +[ 0.203887] RPC: Registered udp transport module. +[ 0.208664] RPC: Registered tcp transport module. +[ 0.213429] RPC: Registered tcp NFSv4.1 backchannel transport module. +[ 0.219944] PCI: CLS 0 bytes, default 64 +[ 0.224170] Unpacking initramfs... +[ 0.262347] Freeing initrd memory: 2336K +[ 0.266531] workingset: timestamp_bits=62 max_order=21 bucket_order=0 +[ 0.280406] NFS: Registering the id_resolver key type +[ 0.284798] Key type id_resolver registered +[ 0.289048] Key type id_legacy registered +[ 0.293114] nfs4filelayout_init: NFSv4 File Layout Driver Registering... +[ 0.300262] NET: Registered protocol family 38 +[ 0.304432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) +[ 0.311862] io scheduler mq-deadline registered +[ 0.316461] io scheduler kyber registered +[ 0.356421] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled +[ 0.363004] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 4, base_baud = 0) is a SiFive UART v0 +[ 0.371468] printk: console [ttySIF0] enabled +[ 0.371468] printk: console [ttySIF0] enabled +[ 0.380223] printk: bootconsole [sbi0] disabled +[ 0.380223] printk: bootconsole [sbi0] disabled +[ 0.389589] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 1, base_baud = 0) is a SiFive UART v0 +[ 0.398680] [drm] radeon kernel modesetting enabled. +[ 0.412395] loop: module loaded +[ 0.415214] sifive_spi 10040000.spi: mapped; irq=3, cs=1 +[ 0.420628] sifive_spi 10050000.spi: mapped; irq=5, cs=1 +[ 0.425897] libphy: Fixed MDIO Bus: probed +[ 0.429964] macb 10090000.ethernet: Registered clk switch 'sifive-gemgxl-mgmt' +[ 0.436743] macb: GEM doesn't support hardware ptp. +[ 0.441621] libphy: MACB_mii_bus: probed +[ 0.601316] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL) +[ 0.615857] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 6 (70:b3:d5:92:f2:f3) +[ 0.625634] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k +[ 0.631381] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. +[ 0.637382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver +[ 0.643799] ehci-pci: EHCI PCI platform driver +[ 0.648261] ehci-platform: EHCI generic platform driver +[ 0.653497] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver +[ 0.659599] ohci-pci: OHCI PCI platform driver +[ 0.664055] ohci-platform: OHCI generic platform driver +[ 0.669448] usbcore: registered new interface driver uas +[ 0.674575] usbcore: registered new interface driver usb-storage +[ 0.680642] mousedev: PS/2 mouse device common for all mice +[ 0.709493] mmc_spi spi1.0: SD/MMC host mmc0, no DMA, no WP, no poweroff, cd polling +[ 0.716615] usbcore: registered new interface driver usbhid +[ 0.722023] usbhid: USB HID core driver +[ 0.726738] NET: Registered protocol family 10 +[ 0.731359] Segment Routing with IPv6 +[ 0.734332] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver +[ 0.740687] NET: Registered protocol family 17 +[ 0.744660] Key type dns_resolver registered +[ 0.806775] mmc0: host does not support reading read-only switch, assuming write-enable +[ 0.814020] mmc0: new SDHC card on SPI +[ 0.820137] mmcblk0: mmc0:0000 SU08G 7.40 GiB +[ 0.850220] mmcblk0: p1 p2 +[ 3.821524] macb 10090000.ethernet eth0: link up (1000/Full) +[ 3.828938] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready +[ 3.848919] Sending DHCP requests .., OK +[ 6.252076] IP-Config: Got DHCP answer from 10.206.4.1, my address is 10.206.7.133 +[ 6.259624] IP-Config: Complete: +[ 6.262831] device=eth0, hwaddr=70:b3:d5:92:f2:f3, ipaddr=10.206.7.133, mask=255.255.252.0, gw=10.206.4.1 +[ 6.272809] host=dhcp-10-206-7-133, domain=sdcorp.global.sandisk.com, nis-domain=(none) +[ 6.281228] bootserver=10.206.126.11, rootserver=10.206.126.11, rootpath= +[ 6.281232] nameserver0=10.86.1.1, nameserver1=10.86.2.1 +[ 6.294179] ntpserver0=10.86.1.1, ntpserver1=10.86.2.1 +[ 6.301026] Freeing unused kernel memory: 212K +[ 6.304683] This architecture does not have kernel memory protection. +[ 6.311121] Run /init as init process _ _ | ||_| | | _ ____ _ _ _ _