Now I am confuse. I am running code which is stored on the flash. I am using ddd (gdb in background) to do source level debugging. If I load elf binary gdb, than I am not really running code on the 852t, but on by Linux / Intell based PC.
TA --- Wolfgang Denk wd@denx.de wrote:
In message 20040713175734.30201.qmail@web50506.mail.yahoo.com you wrote:
I tried loading elf file, this is what I get
BDI>erase 0x02000000 chip Erasing flash at 0x02000000 Erasing flash passed BDI>prog 0x02000000 u-boot elf Programming u-boot , please wait ....
- File offset 0x00000078 to address 0x04000000 size 131408
# Programming flash memory failed at 0x04000040
You misunderstood. I was talking about loading the ELF file in GDB, not about programming it to flash using the BDI's telnet interface. These are completely different things.
Best regards,
Wolfgang Denk
-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Always leave room to add an explanation if it doesn't work out.
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users