21 Jan
2011
21 Jan
'11
11:44 a.m.
Dear Daniel Gorsulowski,
Today I found out by GPIO debugging, that U-Boot seems to boot but prints its startup messages to wrong USART with proper baudrate. I'll try to find out, why there is no output on DBGU.
Note that the USART to use is defined differently than before:
/* serial console */ #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
Best Regards, Reinhard