Hi Alexsandr,
You should put Jagan and me in Cc, we're the one that are going to merge your patches.
On Thu, Oct 04, 2018 at 03:39:33PM +0300, Aleksandr Aleksandrov wrote:
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC.
- add neutis-devboard target to dtb makefile
- add dtsi file for Neutis N5 needs
- add config file for Neutis N5 Dev board
Signed-off-by: Aleksandr Aleksandrov aleksandr.aleksandrov@emlid.com
arch/arm/dts/Makefile | 3 +- .../arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts | 73 ++++++++++++++++++++++ arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi | 66 +++++++++++++++++++ configs/emlid_neutis_n5_devboard_defconfig | 13 ++++ 4 files changed, 154 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi create mode 100644 configs/emlid_neutis_n5_devboard_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 44ebc50..639cbaf 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -391,7 +391,8 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ sun50i-h5-orangepi-zero-plus.dtb \ sun50i-h5-orangepi-pc2.dtb \ sun50i-h5-orangepi-prime.dtb \
- sun50i-h5-orangepi-zero-plus2.dtb
- sun50i-h5-orangepi-zero-plus2.dtb \
- sun50i-h5-emlid-neutis-n5-devboard.dtb
This should be ordered alphabetically.
dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-orangepi-one-plus.dtb \ sun50i-h6-pine-h64.dtb diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts new file mode 100644 index 0000000..4b04d4c --- /dev/null +++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -0,0 +1,73 @@ +/*s
- Copyright (C) 2018 Aleksandr Aleksandrov aleksandr.aleksandrov@emlid.com
- This file is dual-licensed: you can use it either under the terms
- of the GPL or the X11 license, at your option. Note that this dual
- licensing only applies to this file, and not this project as a
- whole.
- a) This library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- Or, alternatively,
- b) Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without
restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.- */
+/dts-v1/;
+#include "sun50i-h5-emlid-neutis-n5.dtsi"
+/ {
- model = "Emlid Neutis N5 Developer board";
- compatible = "emlid,emlid-neutis-n5-devboard",
"emlid,emlid-neutis-n5","allwinner,sun50i-h5";- aliases {
serial0 = &uart0;- };
- chosen {
stdout-path = "serial0:115200n8";- };
+};
+&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
+};
+&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
+}; diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi new file mode 100644 index 0000000..65468a3 --- /dev/null +++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi @@ -0,0 +1,66 @@ +/*s
- Copyright (C) 2018 Aleksandr Aleksandrov aleksandr.aleksandrov@emlid.com
- This file is dual-licensed: you can use it either under the terms
- of the GPL or the X11 license, at your option. Note that this dual
- licensing only applies to this file, and not this project as a
- whole.
- a) This library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- Or, alternatively,
- b) Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without
restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.- */
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
- reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";regulator-name = "vcc3v3";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;- };
+};
+&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <8>;
- non-removable;
- cap-mmc-hw-reset;
- status = "okay";
+};
You should use the same DT than in Linux here
Thanks! Maxime