Dear krishna dwivedi,
In message CAKAK--n326NQLOxERi47i63qeruOAcLr=ifHeoY9Ca=X3C0zJA@mail.gmail.com you wrote:
Board Configuration:
Target Arch CPU BoardName qemu_mips mips mips32 qemu-mips
This builds fine for me:
+ MAKEALL_LOGDIR=/work/wd/tmp-mips-LOG + BUILD_DIR=/work/wd/tmp-mips + ./MAKEALL qemu_mips Configuring for qemu_mips - Board: qemu-mips, Options: SYS_BIG_ENDIAN text data bss dec hex filename 205520 7482 217512 430514 691b2 /work/wd/tmp-mips/u-boot
--------------------- SUMMARY ---------------------------- Boards compiled: 1 ----------------------------------------------------------
While bitbake u-boot:
Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j 4 CROSS_COMPILE=mips-poky-linux- CC=mips-poky-linux-gcc --sysroot=/home/netlogic/eldk/build/tmp/sysroots/qemumips all | awk '(NF && $1 !~ /^#/) { print $1 ": " $1 "_config; $(MAKE)" }' boards.cfg > .boards.depend | System not configured - see README | make: *** [all] Error 1 | ERROR: oe_runmake failed
Anyone please let me know what could be issue here.
You must run "make qemu_mips_config" before you can run "make all".
Best regards,
Wolfgang Denk