On 18 July 2016 at 20:13, Ziyuan Xu xzy.xu@rock-chips.com wrote:
Boot Rom wouldn't initialize sdmmc while booting from eMMC. We need to setup sdmmc gpio, otherwise we will hit an error below:
=>mmc info blk_get_device: if_type=6, devnum=0: dwmmc@ff0c0000.blk, 6, 0 uclass_find_device_by_seq: 0 -1 uclass_find_device_by_seq: 0 0
- -1 -1
- -1 0
- found
uclass_find_device_by_seq: 0 1
- -1 -1
- -1 0
- not found
fdtdec_get_int_array: interrupts get_prop_check_min_len: interrupts Buswidth = 1, clock: 0 Buswidth = 1, clock: 400000 Sending CMD0 dwmci_send_cmd: Timeout on data busy dwmci_send_cmd: Timeout on data busy dwmci_send_cmd: Timeout on data busy dwmci_send_cmd: Timeout on data busy
This reverts commit 6efeeea79c880d3dd262e0dca9da2687f0ab68c9.
Signed-off-by: Ziyuan Xu xzy.xu@rock-chips.com
arch/arm/mach-rockchip/rk3288-board-spl.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
Acked-by: Simon Glass sjg@chromium.org Tested on firefly-rk3288: Tested-by: Simon Glass sjg@chromium.org
I think this is safe to apply now that we have reduced SPL size.
- Simon