DTC issues a warning because #address-cells and #size-cells properties are not set in the mdio node. Also add ethernet1 alias. Also add RTC node. Also fix USB3 regulator startup delay time. Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the speed value is not used byt the comphy driver for PCI Express, but should be 5 GHz nonetheless).
Signed-off-by: Marek Behún marek.behun@nic.cz Reviewed-by: Stefan Roese sr@denx.de --- arch/arm/dts/armada-3720-turris-mox.dts | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts index ff54ce5d0f..14bec0977e 100644 --- a/arch/arm/dts/armada-3720-turris-mox.dts +++ b/arch/arm/dts/armada-3720-turris-mox.dts @@ -24,6 +24,7 @@
aliases { ethernet0 = ð0; + ethernet1 = ð1; i2c0 = &i2c0; spi0 = &spi0; }; @@ -38,12 +39,16 @@ regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + startup-delay-us = <2000000>; shutdown-delay-us = <1000000>; gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; regulator-boot-on; };
mdio { + #address-cells = <1>; + #size-cells = <0>; + eth_phy1: ethernet-phy@1 { reg = <1>; }; @@ -59,7 +64,7 @@
phy1 { phy-type = <PHY_TYPE_PEX0>; - phy-speed = <PHY_SPEED_2_5G>; + phy-speed = <PHY_SPEED_5G>; };
phy2 { @@ -80,6 +85,11 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; status = "okay"; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; };
&sdhci1 {