Import Linux 5.1-rc1 DT from 9e98c678c2d6 ("Linux 5.1-rc1") for the meson-g12a-u200 board, the meson-g12a.dtsi and the corresponding bindings.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/meson-g12a-u200.dts | 29 +++ arch/arm/dts/meson-g12a.dtsi | 192 ++++++++++++++++++ include/dt-bindings/clock/g12a-aoclkc.h | 34 ++++ include/dt-bindings/clock/g12a-clkc.h | 135 ++++++++++++ include/dt-bindings/gpio/meson-g12a-gpio.h | 114 +++++++++++ .../reset/amlogic,meson-g12a-reset.h | 134 ++++++++++++ include/dt-bindings/reset/g12a-aoclkc.h | 18 ++ 8 files changed, 658 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/meson-g12a-u200.dts create mode 100644 arch/arm/dts/meson-g12a.dtsi create mode 100644 include/dt-bindings/clock/g12a-aoclkc.h create mode 100644 include/dt-bindings/clock/g12a-clkc.h create mode 100644 include/dt-bindings/gpio/meson-g12a-gpio.h create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-reset.h create mode 100644 include/dt-bindings/reset/g12a-aoclkc.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 36b969d6de..c5658d359f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -104,7 +104,8 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxl-s905x-libretech-cc.dtb \ meson-gxl-s905x-khadas-vim.dtb \ meson-gxm-khadas-vim2.dtb \ - meson-axg-s400.dtb + meson-axg-s400.dtb \ + meson-g12a-u200.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts new file mode 100644 index 0000000000..c44dbdddf2 --- /dev/null +++ b/arch/arm/dts/meson-g12a-u200.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "amlogic,u200", "amlogic,g12a"; + model = "Amlogic Meson G12A U200 Development Board"; + + aliases { + serial0 = &uart_AO; + }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; + diff --git a/arch/arm/dts/meson-g12a.dtsi b/arch/arm/dts/meson-g12a.dtsi new file mode 100644 index 0000000000..17c6217f8a --- /dev/null +++ b/arch/arm/dts/meson-g12a.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "amlogic,g12a"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apb: bus@ff600000 { + compatible = "simple-bus"; + reg = <0x0 0xff600000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; + + periphs: bus@34400 { + compatible = "simple-bus"; + reg = <0x0 0x34400 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + }; + + hiu: bus@3c000 { + compatible = "simple-bus"; + reg = <0x0 0x3c000 0x0 0x1400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; + + hhi: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,g12a-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + }; + }; + }; + + aobus: bus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; + + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-g12a-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + +}; diff --git a/include/dt-bindings/clock/g12a-aoclkc.h b/include/dt-bindings/clock/g12a-aoclkc.h new file mode 100644 index 0000000000..8db01ffbeb --- /dev/null +++ b/include/dt-bindings/clock/g12a-aoclkc.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2016 BayLibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai qiufang.dai@amlogic.com + */ + +#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK +#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK + +#define CLKID_AO_AHB 0 +#define CLKID_AO_IR_IN 1 +#define CLKID_AO_I2C_M0 2 +#define CLKID_AO_I2C_S0 3 +#define CLKID_AO_UART 4 +#define CLKID_AO_PROD_I2C 5 +#define CLKID_AO_UART2 6 +#define CLKID_AO_IR_OUT 7 +#define CLKID_AO_SAR_ADC 8 +#define CLKID_AO_MAILBOX 9 +#define CLKID_AO_M3 10 +#define CLKID_AO_AHB_SRAM 11 +#define CLKID_AO_RTI 12 +#define CLKID_AO_M4_FCLK 13 +#define CLKID_AO_M4_HCLK 14 +#define CLKID_AO_CLK81 15 +#define CLKID_AO_SAR_ADC_CLK 18 +#define CLKID_AO_32K 23 +#define CLKID_AO_CEC 27 +#define CLKID_AO_CTS_RTC_OSCIN 28 + +#endif diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h new file mode 100644 index 0000000000..83b657038d --- /dev/null +++ b/include/dt-bindings/clock/g12a-clkc.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ +/* + * Meson-G12A clock tree IDs + * + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#ifndef __G12A_CLKC_H +#define __G12A_CLKC_H + +#define CLKID_SYS_PLL 0 +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 2 +#define CLKID_FCLK_DIV3 3 +#define CLKID_FCLK_DIV4 4 +#define CLKID_FCLK_DIV5 5 +#define CLKID_FCLK_DIV7 6 +#define CLKID_GP0_PLL 7 +#define CLKID_CLK81 10 +#define CLKID_MPLL0 11 +#define CLKID_MPLL1 12 +#define CLKID_MPLL2 13 +#define CLKID_MPLL3 14 +#define CLKID_DDR 15 +#define CLKID_DOS 16 +#define CLKID_AUDIO_LOCKER 17 +#define CLKID_MIPI_DSI_HOST 18 +#define CLKID_ETH_PHY 19 +#define CLKID_ISA 20 +#define CLKID_PL301 21 +#define CLKID_PERIPHS 22 +#define CLKID_SPICC0 23 +#define CLKID_I2C 24 +#define CLKID_SANA 25 +#define CLKID_SD 26 +#define CLKID_RNG0 27 +#define CLKID_UART0 28 +#define CLKID_SPICC1 29 +#define CLKID_HIU_IFACE 30 +#define CLKID_MIPI_DSI_PHY 31 +#define CLKID_ASSIST_MISC 32 +#define CLKID_SD_EMMC_A 33 +#define CLKID_SD_EMMC_B 34 +#define CLKID_SD_EMMC_C 35 +#define CLKID_AUDIO_CODEC 36 +#define CLKID_AUDIO 37 +#define CLKID_ETH 38 +#define CLKID_DEMUX 39 +#define CLKID_AUDIO_IFIFO 40 +#define CLKID_ADC 41 +#define CLKID_UART1 42 +#define CLKID_G2D 43 +#define CLKID_RESET 44 +#define CLKID_PCIE_COMB 45 +#define CLKID_PARSER 46 +#define CLKID_USB 47 +#define CLKID_PCIE_PHY 48 +#define CLKID_AHB_ARB0 49 +#define CLKID_AHB_DATA_BUS 50 +#define CLKID_AHB_CTRL_BUS 51 +#define CLKID_HTX_HDCP22 52 +#define CLKID_HTX_PCLK 53 +#define CLKID_BT656 54 +#define CLKID_USB1_DDR_BRIDGE 55 +#define CLKID_MMC_PCLK 56 +#define CLKID_UART2 57 +#define CLKID_VPU_INTR 58 +#define CLKID_GIC 59 +#define CLKID_SD_EMMC_A_CLK0 60 +#define CLKID_SD_EMMC_B_CLK0 61 +#define CLKID_SD_EMMC_C_CLK0 62 +#define CLKID_HIFI_PLL 74 +#define CLKID_VCLK2_VENCI0 80 +#define CLKID_VCLK2_VENCI1 81 +#define CLKID_VCLK2_VENCP0 82 +#define CLKID_VCLK2_VENCP1 83 +#define CLKID_VCLK2_VENCT0 84 +#define CLKID_VCLK2_VENCT1 85 +#define CLKID_VCLK2_OTHER 86 +#define CLKID_VCLK2_ENCI 87 +#define CLKID_VCLK2_ENCP 88 +#define CLKID_DAC_CLK 89 +#define CLKID_AOCLK 90 +#define CLKID_IEC958 91 +#define CLKID_ENC480P 92 +#define CLKID_RNG1 93 +#define CLKID_VCLK2_ENCT 94 +#define CLKID_VCLK2_ENCL 95 +#define CLKID_VCLK2_VENCLMMC 96 +#define CLKID_VCLK2_VENCL 97 +#define CLKID_VCLK2_OTHER1 98 +#define CLKID_FCLK_DIV2P5 99 +#define CLKID_DMA 105 +#define CLKID_EFUSE 106 +#define CLKID_ROM_BOOT 107 +#define CLKID_RESET_SEC 108 +#define CLKID_SEC_AHB_APB3 109 +#define CLKID_VPU_0_SEL 110 +#define CLKID_VPU_0 112 +#define CLKID_VPU_1_SEL 113 +#define CLKID_VPU_1 115 +#define CLKID_VPU 116 +#define CLKID_VAPB_0_SEL 117 +#define CLKID_VAPB_0 119 +#define CLKID_VAPB_1_SEL 120 +#define CLKID_VAPB_1 122 +#define CLKID_VAPB_SEL 123 +#define CLKID_VAPB 124 +#define CLKID_HDMI_PLL 128 +#define CLKID_VID_PLL 129 +#define CLKID_VCLK 138 +#define CLKID_VCLK2 139 +#define CLKID_VCLK_DIV1 148 +#define CLKID_VCLK_DIV2 149 +#define CLKID_VCLK_DIV4 150 +#define CLKID_VCLK_DIV6 151 +#define CLKID_VCLK_DIV12 152 +#define CLKID_VCLK2_DIV1 153 +#define CLKID_VCLK2_DIV2 154 +#define CLKID_VCLK2_DIV4 155 +#define CLKID_VCLK2_DIV6 156 +#define CLKID_VCLK2_DIV12 157 +#define CLKID_CTS_ENCI 162 +#define CLKID_CTS_ENCP 163 +#define CLKID_CTS_VDAC 164 +#define CLKID_HDMI_TX 165 +#define CLKID_HDMI 168 +#define CLKID_MALI_0_SEL 169 +#define CLKID_MALI_0 171 +#define CLKID_MALI_1_SEL 172 +#define CLKID_MALI_1 174 +#define CLKID_MALI 175 +#define CLKID_MPLL_5OM 177 + +#endif /* __G12A_CLKC_H */ diff --git a/include/dt-bindings/gpio/meson-g12a-gpio.h b/include/dt-bindings/gpio/meson-g12a-gpio.h new file mode 100644 index 0000000000..f7bd69350d --- /dev/null +++ b/include/dt-bindings/gpio/meson-g12a-gpio.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + * Author: Xingyu Chen xingyu.chen@amlogic.com + */ + +#ifndef _DT_BINDINGS_MESON_G12A_GPIO_H +#define _DT_BINDINGS_MESON_G12A_GPIO_H + +/* First GPIO chip */ +#define GPIOAO_0 0 +#define GPIOAO_1 1 +#define GPIOAO_2 2 +#define GPIOAO_3 3 +#define GPIOAO_4 4 +#define GPIOAO_5 5 +#define GPIOAO_6 6 +#define GPIOAO_7 7 +#define GPIOAO_8 8 +#define GPIOAO_9 9 +#define GPIOAO_10 10 +#define GPIOAO_11 11 +#define GPIOE_0 12 +#define GPIOE_1 13 +#define GPIOE_2 14 + +/* Second GPIO chip */ +#define GPIOZ_0 0 +#define GPIOZ_1 1 +#define GPIOZ_2 2 +#define GPIOZ_3 3 +#define GPIOZ_4 4 +#define GPIOZ_5 5 +#define GPIOZ_6 6 +#define GPIOZ_7 7 +#define GPIOZ_8 8 +#define GPIOZ_9 9 +#define GPIOZ_10 10 +#define GPIOZ_11 11 +#define GPIOZ_12 12 +#define GPIOZ_13 13 +#define GPIOZ_14 14 +#define GPIOZ_15 15 +#define GPIOH_0 16 +#define GPIOH_1 17 +#define GPIOH_2 18 +#define GPIOH_3 19 +#define GPIOH_4 20 +#define GPIOH_5 21 +#define GPIOH_6 22 +#define GPIOH_7 23 +#define GPIOH_8 24 +#define BOOT_0 25 +#define BOOT_1 26 +#define BOOT_2 27 +#define BOOT_3 28 +#define BOOT_4 29 +#define BOOT_5 30 +#define BOOT_6 31 +#define BOOT_7 32 +#define BOOT_8 33 +#define BOOT_9 34 +#define BOOT_10 35 +#define BOOT_11 36 +#define BOOT_12 37 +#define BOOT_13 38 +#define BOOT_14 39 +#define BOOT_15 40 +#define GPIOC_0 41 +#define GPIOC_1 42 +#define GPIOC_2 43 +#define GPIOC_3 44 +#define GPIOC_4 45 +#define GPIOC_5 46 +#define GPIOC_6 47 +#define GPIOC_7 48 +#define GPIOA_0 49 +#define GPIOA_1 50 +#define GPIOA_2 51 +#define GPIOA_3 52 +#define GPIOA_4 53 +#define GPIOA_5 54 +#define GPIOA_6 55 +#define GPIOA_7 56 +#define GPIOA_8 57 +#define GPIOA_9 58 +#define GPIOA_10 59 +#define GPIOA_11 60 +#define GPIOA_12 61 +#define GPIOA_13 62 +#define GPIOA_14 63 +#define GPIOA_15 64 +#define GPIOX_0 65 +#define GPIOX_1 66 +#define GPIOX_2 67 +#define GPIOX_3 68 +#define GPIOX_4 69 +#define GPIOX_5 70 +#define GPIOX_6 71 +#define GPIOX_7 72 +#define GPIOX_8 73 +#define GPIOX_9 74 +#define GPIOX_10 75 +#define GPIOX_11 76 +#define GPIOX_12 77 +#define GPIOX_13 78 +#define GPIOX_14 79 +#define GPIOX_15 80 +#define GPIOX_16 81 +#define GPIOX_17 82 +#define GPIOX_18 83 +#define GPIOX_19 84 + +#endif /* _DT_BINDINGS_MESON_G12A_GPIO_H */ diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h new file mode 100644 index 0000000000..8063e8314e --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h @@ -0,0 +1,134 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Jerome Brunet jbrunet@baylibre.com + * + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +/* 1 */ +#define RESET_DOS 2 +/* 3-4 */ +#define RESET_VIU 5 +#define RESET_AFIFO 6 +#define RESET_VID_PLL_DIV 7 +/* 8-9 */ +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_PCIE_CTRL_A 12 +#define RESET_VCBUS 13 +#define RESET_PCIE_PHY 14 +#define RESET_PCIE_APB 15 +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +/* 18 */ +#define RESET_HDMITX_CAPB3 19 +#define RESET_DVALIN_CAPB3 20 +#define RESET_DOS_CAPB3 21 +/* 22 */ +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +/* 27-31 */ +/* RESET1 */ +/* 32 */ +#define RESET_DEMUX 33 +#define RESET_USB 34 +#define RESET_DDR 35 +/* 36 */ +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +/* 39 */ +#define RESET_PARSER 40 +/* 41 */ +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_SD_EMMC_A 44 +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +/* 47-60 */ +#define RESET_AUDIO_CODEC 61 +/* 62-63 */ +/* RESET2 */ +/* 64 */ +#define RESET_AUDIO 65 +#define RESET_HDMITX_PHY 66 +/* 67 */ +#define RESET_MIPI_DSI_HOST 68 +#define RESET_ALOCKER 69 +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_CTL 73 +#define RESET_PARSER_TOP 74 +/* 75-77 */ +#define RESET_DVALIN 78 +#define RESET_HDMITX 79 +/* 80-95 */ +/* RESET3 */ +/* 96-95 */ +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES_PL 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_0 109 +#define RESET_DEMUX_1 110 +#define RESET_DEMUX_2 111 +/* 112-127 */ +/* RESET4 */ +/* 128-129 */ +#define RESET_MIPI_DSI_PHY 130 +/* 131-132 */ +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +/* 136 */ +#define RESET_VDAC 137 +/* 138-139 */ +#define RESET_VDI6 140 +#define RESET_VENCL 141 +#define RESET_I2C_M1 142 +#define RESET_I2C_M2 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_GEN 192 +#define RESET_SPICC0 193 +#define RESET_SC 194 +#define RESET_SANA_3 195 +#define RESET_I2C_M0 196 +#define RESET_TS_PLL 197 +#define RESET_SPICC1 198 +#define RESET_STREAM 199 +#define RESET_TS_CPU 200 +#define RESET_UART0 201 +#define RESET_UART1_2 202 +#define RESET_ASYNC0 203 +#define RESET_ASYNC1 204 +#define RESET_SPIFC0 205 +#define RESET_I2C_M3 206 +/* 207-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +#define RESET_TS_GPU 228 +#define RESET_DEVICE_MMC_ARB 229 +#define RESET_DVALIN_DMC_PIPL 230 +#define RESET_VID_LOCK 231 +#define RESET_NIC_DMC_PIPL 232 +#define RESET_DMC_VPU_PIPL 233 +#define RESET_GE2D_DMC_PIPL 234 +#define RESET_HCODEC_DMC_PIPL 235 +#define RESET_WAVE420_DMC_PIPL 236 +#define RESET_HEVCF_DMC_PIPL 237 +/* 238-255 */ + +#endif diff --git a/include/dt-bindings/reset/g12a-aoclkc.h b/include/dt-bindings/reset/g12a-aoclkc.h new file mode 100644 index 0000000000..bd2e233713 --- /dev/null +++ b/include/dt-bindings/reset/g12a-aoclkc.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2016 BayLibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK +#define DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK + +#define RESET_AO_IR_IN 0 +#define RESET_AO_UART 1 +#define RESET_AO_I2C_M 2 +#define RESET_AO_I2C_S 3 +#define RESET_AO_SAR_ADC 4 +#define RESET_AO_UART2 5 +#define RESET_AO_IR_OUT 6 + +#endif