On Wednesday 11 March 2009, Felix Radensky wrote:
The PCIe device used here is the Intel PRO/1000 PT Desktop card.
Which Kilauea board revision are you using? And do you see the same problems with other PCIe cards as well?
I use Kilauea revision 1.2 and exactly the same network card as you.
I'm using the same board revision too.
The problem is still here.
Strange.
It doesn't happen with other PCI-E card I have (10G Ethernet adapter).
I have a feeling that 2 Kilauea boards of the same revision may sometimes exhibit different behavior with the same version of u-boot.
This could be the case. Do you have another Kilauea board?
For example, with u-boot 2008.10-rc2 that comes with AMCC CD, memory was properly detected on one board in bootstrap option B but not detected on the another. I had to recompile u-boot and disable autocalibration to make things work on this board.
This is a different issue. The DDR2 autocalibration had a bug. Because of this some boards could boot just fine with autocalibration enabled and some not. This bug should be fixed now. In the latest U-Boot version autocalibration is enabled again for Kilauea and seems to work now. At least I didn't notice any problems anymore. Please give it a try and let me know if this doesn't work for you.
But again, this is a different issue. Not sure how to help you with the PCIe detection problem.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================