From: Jernej Skrabec jernej.skrabec@gmail.com
Currently HDMI controller MMIO address is hardcoded. Change that so address is read from DT node. That will make adding support for new variants a bit easier.
Signed-off-by: Jernej Skrabec jernej.skrabec@gmail.com Signed-off-by: Samuel Holland samuel@sholland.org ---
drivers/video/sunxi/sunxi_dw_hdmi.c | 39 ++++++++++++++++++----------- 1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c b/drivers/video/sunxi/sunxi_dw_hdmi.c index e7265af7d8f..4f5d0989286 100644 --- a/drivers/video/sunxi/sunxi_dw_hdmi.c +++ b/drivers/video/sunxi/sunxi_dw_hdmi.c @@ -56,10 +56,10 @@ static int sunxi_dw_hdmi_get_divider(uint clock) return 1; }
-static void sunxi_dw_hdmi_phy_init(void) +static void sunxi_dw_hdmi_phy_init(struct dw_hdmi *hdmi) { struct sunxi_hdmi_phy * const phy = - (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); + (struct sunxi_hdmi_phy *)(hdmi->ioaddr + HDMI_PHY_OFFS); unsigned long tmo; u32 tmp;
@@ -113,10 +113,10 @@ static void sunxi_dw_hdmi_phy_init(void) writel(0x42494E47, &phy->unscramble); }
-static void sunxi_dw_hdmi_phy_set(uint clock, int phy_div) +static void sunxi_dw_hdmi_phy_set(struct dw_hdmi *hdmi, uint clock, int phy_div) { struct sunxi_hdmi_phy * const phy = - (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); + (struct sunxi_hdmi_phy *)(hdmi->ioaddr + HDMI_PHY_OFFS); int div = sunxi_dw_hdmi_get_divider(clock); u32 tmp;
@@ -270,7 +270,7 @@ static int sunxi_dw_hdmi_phy_cfg(struct dw_hdmi *hdmi, uint mpixelclock) int phy_div;
sunxi_dw_hdmi_pll_set(mpixelclock / 1000, &phy_div); - sunxi_dw_hdmi_phy_set(mpixelclock, phy_div); + sunxi_dw_hdmi_phy_set(hdmi, mpixelclock, phy_div);
return 0; } @@ -291,10 +291,10 @@ static bool sunxi_dw_hdmi_mode_valid(struct udevice *dev, static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp, const struct display_timing *edid) { + struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); struct sunxi_hdmi_phy * const phy = - (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS); + (struct sunxi_hdmi_phy *)(priv->hdmi.ioaddr + HDMI_PHY_OFFS); struct display_plat *uc_plat = dev_get_uclass_plat(dev); - struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); int ret;
ret = dw_hdmi_enable(&priv->hdmi, edid); @@ -316,7 +316,7 @@ static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp, * again or othwerwise BSP driver won't work. Dummy read is * needed or otherwise last write doesn't get written correctly. */ - (void)readb(SUNXI_HDMI_BASE); + (void)readb(priv->hdmi.ioaddr); writel(0, &phy->unscramble);
return 0; @@ -345,13 +345,7 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev) /* Clock on */ setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
- sunxi_dw_hdmi_phy_init(); - - priv->hdmi.ioaddr = SUNXI_HDMI_BASE; - priv->hdmi.i2c_clk_high = 0xd8; - priv->hdmi.i2c_clk_low = 0xfe; - priv->hdmi.reg_io_width = 1; - priv->hdmi.phy_set = sunxi_dw_hdmi_phy_cfg; + sunxi_dw_hdmi_phy_init(&priv->hdmi);
ret = dw_hdmi_phy_wait_for_hpd(&priv->hdmi); if (ret < 0) { @@ -364,6 +358,20 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev) return 0; }
+static int sunxi_dw_hdmi_of_to_plat(struct udevice *dev) +{ + struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); + struct dw_hdmi *hdmi = &priv->hdmi; + + hdmi->ioaddr = (ulong)dev_read_addr(dev); + hdmi->i2c_clk_high = 0xd8; + hdmi->i2c_clk_low = 0xfe; + hdmi->reg_io_width = 1; + hdmi->phy_set = sunxi_dw_hdmi_phy_cfg; + + return 0; +} + static const struct dm_display_ops sunxi_dw_hdmi_ops = { .read_edid = sunxi_dw_hdmi_read_edid, .enable = sunxi_dw_hdmi_enable, @@ -380,6 +388,7 @@ U_BOOT_DRIVER(sunxi_dw_hdmi) = { .id = UCLASS_DISPLAY, .of_match = sunxi_dw_hdmi_ids, .probe = sunxi_dw_hdmi_probe, + .of_to_plat = sunxi_dw_hdmi_of_to_plat, .priv_auto = sizeof(struct sunxi_dw_hdmi_priv), .ops = &sunxi_dw_hdmi_ops, };