Hi Andreas/All,
Thanks for the reply.
I am using same baudrate for terminal as well as kermit modes. both are with 115200.
I am getting the prompt on console over serial and able to execute commands like help, bdinfo, md and mw etc.
I am sending a log herewith with some of the commands' execution as well as the .kermrc file that I am using.
Any pointer would be of very much help.
Thanks and Regards Banajit
Message: 7 Date: Wed, 19 Jul 2006 12:54:46 +0200 From: Andreas Schweigstill andreas@schweigstill.de Subject: Re: [U-Boot-Users] Loadb issue To: u-boot-users@lists.sourceforge.net Message-ID: < 44BE0F76.50208@schweigstill.de> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Dear Banajit!
Banajit Goswami schrieb:
Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline
Please do not post messages in HTML format to this list.
- at u-boot command prompt gave following command => loadb 0x60008000 115200
- From hyperterminal, Transfer->send file with protocol as kermit,
selected the file and tried sending, but failed. Everytime hyperterminal poped up "error limit exceeded".
Are you sure that you are using the same baudrate for terminal mode and kermit mode? Do the RS232 level converters have their own supply or do they get it from the modem control lines? Although you selected no handshake this doesn't neccessarily mean that the control lines don't get toggled.
With best regards Andreas Schweigstill
-- Dipl.-Phys. Andreas Schweigstill Schweigstill IT | Embedded Systems Schauenburgerstra?e 116, D-24118 Kiel, Germany Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436 Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/