Signed-off-by: Albert Aribaud albert.aribaud@free.fr --- arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 4 +- arch/arm/include/asm/arch-kirkwood/kirkwood.h | 5 + drivers/net/Makefile | 2 +- drivers/net/mv_egiga.c | 322 +++++++++--------- drivers/net/mv_egiga.h | 466 ++++++++++++------------ include/configs/guruplug.h | 4 +- include/configs/km_arm.h | 4 +- include/configs/mv88f6281gtw_ge.h | 4 +- include/configs/openrd_base.h | 4 +- include/configs/rd6281a.h | 4 +- include/configs/sheevaplug.h | 4 +- include/netdev.h | 2 +- 12 files changed, 418 insertions(+), 407 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index 6fc3902..786ffc6 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -378,10 +378,10 @@ int arch_misc_init(void) } #endif /* CONFIG_ARCH_MISC_INIT */
-#ifdef CONFIG_KIRKWOOD_EGIGA +#ifdef CONFIG_MV_EGIGA int cpu_eth_init(bd_t *bis) { - kirkwood_egiga_initialize(bis); + mv_egiga_initialize(bis); return 0; } #endif diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/kirkwood.h index 2470efb..9200605 100644 --- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h +++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h @@ -60,6 +60,11 @@ #define KW_EGIGA0_BASE (KW_REGISTER(0x72000)) #define KW_EGIGA1_BASE (KW_REGISTER(0x76000))
+#if defined (CONFIG_MV_EGIGA) +#define MV_EGIGA0_BASE KW_EGIGA0_BASE +#define MV_EGIGA1_BASE KW_EGIGA1_BASE +#endif + #if defined (CONFIG_KW88F6281) #include <asm/arch/kw88f6281.h> #elif defined (CONFIG_KW88F6192) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1599c26..04f8de0 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -52,7 +52,7 @@ COBJS-$(CONFIG_MACB) += macb.o COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o -COBJS-$(CONFIG_KIRKWOOD_EGIGA) += mv_egiga.o +COBJS-$(CONFIG_MV_EGIGA) += mv_egiga.o COBJS-$(CONFIG_NATSEMI) += natsemi.o COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o diff --git a/drivers/net/mv_egiga.c b/drivers/net/mv_egiga.c index e635414..0da4c4b 100644 --- a/drivers/net/mv_egiga.c +++ b/drivers/net/mv_egiga.c @@ -35,13 +35,17 @@ #include <asm/errno.h> #include <asm/types.h> #include <asm/byteorder.h> + +#if defined (CONFIG_KIRKWOOD) #include <asm/arch/kirkwood.h> +#endif + #include "mv_egiga.h"
DECLARE_GLOBAL_DATA_PTR;
-#define KIRKWOOD_PHY_ADR_REQUEST 0xee -#define KWGBE_SMI_REG (((struct kwgbe_registers *)KW_EGIGA0_BASE)->smi) +#define MV_PHY_ADR_REQUEST 0xee +#define MV_EGIGA_SMI_REG (((struct mv_egiga_registers *)MV_EGIGA0_BASE)->smi)
/* * smi_reg_read - miiphy_read callback function. @@ -51,16 +55,16 @@ DECLARE_GLOBAL_DATA_PTR; static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) { struct eth_device *dev = eth_get_dev_by_name(devname); - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mv_egiga_device *dmvegiga = to_mv_egiga(dev); + struct mv_egiga_registers *regs = dmvegiga->regs; u32 smi_reg; u32 timeout;
/* Phyadr read request */ - if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST && - reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) { + if (phy_adr == MV_PHY_ADR_REQUEST && + reg_ofs == MV_PHY_ADR_REQUEST) { /* */ - *data = (u16) (KWGBEREG_RD(regs->phyadr) & PHYADR_MASK); + *data = (u16) (MV_EGIGA_REG_RD(regs->phyadr) & PHYADR_MASK); return 0; } /* check parameters */ @@ -75,42 +79,42 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) return -EFAULT; }
- timeout = KWGBE_PHY_SMI_TIMEOUT; + timeout = MV_EGIGA_PHY_SMI_TIMEOUT; /* wait till the SMI is not busy */ do { /* read smi register */ - smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); + smi_reg = MV_EGIGA_REG_RD(MV_EGIGA_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI busy timeout\n", __FUNCTION__); return -EFAULT; } - } while (smi_reg & KWGBE_PHY_SMI_BUSY_MASK); + } while (smi_reg & MV_EGIGA_PHY_SMI_BUSY_MASK);
/* fill the phy address and regiser offset and read opcode */ - smi_reg = (phy_adr << KWGBE_PHY_SMI_DEV_ADDR_OFFS) - | (reg_ofs << KWGBE_SMI_REG_ADDR_OFFS) - | KWGBE_PHY_SMI_OPCODE_READ; + smi_reg = (phy_adr << MV_EGIGA_PHY_SMI_DEV_ADDR_OFFS) + | (reg_ofs << MV_EGIGA_SMI_REG_ADDR_OFFS) + | MV_EGIGA_PHY_SMI_OPCODE_READ;
/* write the smi register */ - KWGBEREG_WR(KWGBE_SMI_REG, smi_reg); + MV_EGIGA_REG_WR(MV_EGIGA_SMI_REG, smi_reg);
/*wait till read value is ready */ - timeout = KWGBE_PHY_SMI_TIMEOUT; + timeout = MV_EGIGA_PHY_SMI_TIMEOUT;
do { /* read smi register */ - smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); + smi_reg = MV_EGIGA_REG_RD(MV_EGIGA_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI read ready timeout\n", __FUNCTION__); return -EFAULT; } - } while (!(smi_reg & KWGBE_PHY_SMI_READ_VALID_MASK)); + } while (!(smi_reg & MV_EGIGA_PHY_SMI_READ_VALID_MASK));
/* Wait for the data to update in the SMI register */ - for (timeout = 0; timeout < KWGBE_PHY_SMI_TIMEOUT; timeout++) ; + for (timeout = 0; timeout < MV_EGIGA_PHY_SMI_TIMEOUT; timeout++) ;
- *data = (u16) (KWGBEREG_RD(KWGBE_SMI_REG) & KWGBE_PHY_SMI_DATA_MASK); + *data = (u16) (MV_EGIGA_REG_RD(MV_EGIGA_SMI_REG) & MV_EGIGA_PHY_SMI_DATA_MASK);
debug("%s:(adr %d, off %d) value= %04x\n", __FUNCTION__, phy_adr, reg_ofs, *data); @@ -127,15 +131,15 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data) { struct eth_device *dev = eth_get_dev_by_name(devname); - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mv_egiga_device *dmvegiga = to_mv_egiga(dev); + struct mv_egiga_registers *regs = dmvegiga->regs; u32 smi_reg; u32 timeout;
/* Phyadr write request*/ - if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST && - reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) { - KWGBEREG_WR(regs->phyadr, data); + if (phy_adr == MV_PHY_ADR_REQUEST && + reg_ofs == MV_PHY_ADR_REQUEST) { + MV_EGIGA_REG_WR(regs->phyadr, data); return 0; }
@@ -150,24 +154,24 @@ static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data) }
/* wait till the SMI is not busy */ - timeout = KWGBE_PHY_SMI_TIMEOUT; + timeout = MV_EGIGA_PHY_SMI_TIMEOUT; do { /* read smi register */ - smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); + smi_reg = MV_EGIGA_REG_RD(MV_EGIGA_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI busy timeout\n", __FUNCTION__); return -ETIME; } - } while (smi_reg & KWGBE_PHY_SMI_BUSY_MASK); + } while (smi_reg & MV_EGIGA_PHY_SMI_BUSY_MASK);
/* fill the phy addr and reg offset and write opcode and data */ - smi_reg = (data << KWGBE_PHY_SMI_DATA_OFFS); - smi_reg |= (phy_adr << KWGBE_PHY_SMI_DEV_ADDR_OFFS) - | (reg_ofs << KWGBE_SMI_REG_ADDR_OFFS); - smi_reg &= ~KWGBE_PHY_SMI_OPCODE_READ; + smi_reg = (data << MV_EGIGA_PHY_SMI_DATA_OFFS); + smi_reg |= (phy_adr << MV_EGIGA_PHY_SMI_DEV_ADDR_OFFS) + | (reg_ofs << MV_EGIGA_SMI_REG_ADDR_OFFS); + smi_reg &= ~MV_EGIGA_PHY_SMI_OPCODE_READ;
/* write the smi register */ - KWGBEREG_WR(KWGBE_SMI_REG, smi_reg); + MV_EGIGA_REG_WR(MV_EGIGA_SMI_REG, smi_reg);
return 0; } @@ -204,46 +208,46 @@ static void stop_queue(u32 * qreg) * @regs Register struct pointer. * @param Address decode parameter struct. */ -static void set_access_control(struct kwgbe_registers *regs, - struct kwgbe_winparam *param) +static void set_access_control(struct mv_egiga_registers *regs, + struct mv_egiga_winparam *param) { u32 access_prot_reg;
/* Set access control register */ - access_prot_reg = KWGBEREG_RD(regs->epap); + access_prot_reg = MV_EGIGA_REG_RD(regs->epap); /* clear window permission */ access_prot_reg &= (~(3 << (param->win * 2))); access_prot_reg |= (param->access_ctrl << (param->win * 2)); - KWGBEREG_WR(regs->epap, access_prot_reg); + MV_EGIGA_REG_WR(regs->epap, access_prot_reg);
/* Set window Size reg (SR) */ - KWGBEREG_WR(regs->barsz[param->win].size, + MV_EGIGA_REG_WR(regs->barsz[param->win].size, (((param->size / 0x10000) - 1) << 16));
/* Set window Base address reg (BA) */ - KWGBEREG_WR(regs->barsz[param->win].bar, + MV_EGIGA_REG_WR(regs->barsz[param->win].bar, (param->target | param->attrib | param->base_addr)); /* High address remap reg (HARR) */ if (param->win < 4) - KWGBEREG_WR(regs->ha_remap[param->win], param->high_addr); + MV_EGIGA_REG_WR(regs->ha_remap[param->win], param->high_addr);
/* Base address enable reg (BARER) */ if (param->enable == 1) - KWGBEREG_BITS_RESET(regs->bare, (1 << param->win)); + MV_EGIGA_REG_BITS_RESET(regs->bare, (1 << param->win)); else - KWGBEREG_BITS_SET(regs->bare, (1 << param->win)); + MV_EGIGA_REG_BITS_SET(regs->bare, (1 << param->win)); }
-static void set_dram_access(struct kwgbe_registers *regs) +static void set_dram_access(struct mv_egiga_registers *regs) { - struct kwgbe_winparam win_param; + struct mv_egiga_winparam win_param; int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { /* Set access parameters for DRAM bank i */ win_param.win = i; /* Use Ethernet window i */ /* Window target - DDR */ - win_param.target = KWGBE_TARGET_DRAM; + win_param.target = MV_EGIGA_TARGET_DRAM; /* Enable full access */ win_param.access_ctrl = EWIN_ACCESS_FULL; win_param.high_addr = 0; @@ -286,19 +290,19 @@ static void set_dram_access(struct kwgbe_registers *regs) * Go through all the DA filter tables (Unicast, Special Multicast & Other * Multicast) and set each entry to 0. */ -static void port_init_mac_tables(struct kwgbe_registers *regs) +static void port_init_mac_tables(struct mv_egiga_registers *regs) { int table_index;
/* Clear DA filter unicast table (Ex_dFUT) */ for (table_index = 0; table_index < 4; ++table_index) - KWGBEREG_WR(regs->dfut[table_index], 0); + MV_EGIGA_REG_WR(regs->dfut[table_index], 0);
for (table_index = 0; table_index < 64; ++table_index) { /* Clear DA filter special multicast table (Ex_dFSMT) */ - KWGBEREG_WR(regs->dfsmt[table_index], 0); + MV_EGIGA_REG_WR(regs->dfsmt[table_index], 0); /* Clear DA filter other multicast table (Ex_dFOMT) */ - KWGBEREG_WR(regs->dfomt[table_index], 0); + MV_EGIGA_REG_WR(regs->dfomt[table_index], 0); } }
@@ -316,7 +320,7 @@ static void port_init_mac_tables(struct kwgbe_registers *regs) * * RETURN: 1 if output succeeded. 0 if option parameter is invalid. */ -static int port_uc_addr(struct kwgbe_registers *regs, u8 uc_nibble, +static int port_uc_addr(struct mv_egiga_registers *regs, u8 uc_nibble, int option) { u32 unicast_reg; @@ -336,16 +340,16 @@ static int port_uc_addr(struct kwgbe_registers *regs, u8 uc_nibble, * Clear accepts frame bit at specified unicast * DA table entry */ - unicast_reg = KWGBEREG_RD(regs->dfut[tbl_offset]); + unicast_reg = MV_EGIGA_REG_RD(regs->dfut[tbl_offset]); unicast_reg &= (0xFF << (8 * reg_offset)); - KWGBEREG_WR(regs->dfut[tbl_offset], unicast_reg); + MV_EGIGA_REG_WR(regs->dfut[tbl_offset], unicast_reg); break; case ACCEPT_MAC_ADDR: /* Set accepts frame bit at unicast DA filter table entry */ - unicast_reg = KWGBEREG_RD(regs->dfut[tbl_offset]); + unicast_reg = MV_EGIGA_REG_RD(regs->dfut[tbl_offset]); unicast_reg &= (0xFF << (8 * reg_offset)); unicast_reg |= ((0x01 | (RXUQ << 1)) << (8 * reg_offset)); - KWGBEREG_WR(regs->dfut[tbl_offset], unicast_reg); + MV_EGIGA_REG_WR(regs->dfut[tbl_offset], unicast_reg); break; default: return 0; @@ -356,7 +360,7 @@ static int port_uc_addr(struct kwgbe_registers *regs, u8 uc_nibble, /* * port_uc_addr_set - This function Set the port Unicast address. */ -static void port_uc_addr_set(struct kwgbe_registers *regs, u8 * p_addr) +static void port_uc_addr_set(struct mv_egiga_registers *regs, u8 * p_addr) { u32 mac_h; u32 mac_l; @@ -365,92 +369,92 @@ static void port_uc_addr_set(struct kwgbe_registers *regs, u8 * p_addr) mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) | (p_addr[3] << 0);
- KWGBEREG_WR(regs->macal, mac_l); - KWGBEREG_WR(regs->macah, mac_h); + MV_EGIGA_REG_WR(regs->macal, mac_l); + MV_EGIGA_REG_WR(regs->macah, mac_h);
/* Accept frames of this address */ port_uc_addr(regs, p_addr[5], ACCEPT_MAC_ADDR); }
/* - * kwgbe_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. + * mv_egiga_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. */ -static void kwgbe_init_rx_desc_ring(struct kwgbe_device *dkwgbe) +static void mv_egiga_init_rx_desc_ring(struct mv_egiga_device *dmvegiga) { - struct kwgbe_rxdesc *p_rx_desc; + struct mv_egiga_rxdesc *p_rx_desc; int i;
/* initialize the Rx descriptors ring */ - p_rx_desc = dkwgbe->p_rxdesc; + p_rx_desc = dmvegiga->p_rxdesc; for (i = 0; i < RINGSZ; i++) { p_rx_desc->cmd_sts = - KWGBE_BUFFER_OWNED_BY_DMA | KWGBE_RX_EN_INTERRUPT; + MV_EGIGA_BUFFER_OWNED_BY_DMA | MV_EGIGA_RX_EN_INTERRUPT; p_rx_desc->buf_size = PKTSIZE_ALIGN; p_rx_desc->byte_cnt = 0; - p_rx_desc->buf_ptr = dkwgbe->p_rxbuf + i * PKTSIZE_ALIGN; + p_rx_desc->buf_ptr = dmvegiga->p_rxbuf + i * PKTSIZE_ALIGN; if (i == (RINGSZ - 1)) - p_rx_desc->nxtdesc_p = dkwgbe->p_rxdesc; + p_rx_desc->nxtdesc_p = dmvegiga->p_rxdesc; else { - p_rx_desc->nxtdesc_p = (struct kwgbe_rxdesc *) - ((u32) p_rx_desc + KW_RXQ_DESC_ALIGNED_SIZE); + p_rx_desc->nxtdesc_p = (struct mv_egiga_rxdesc *) + ((u32) p_rx_desc + MV_RXQ_DESC_ALIGNED_SIZE); p_rx_desc = p_rx_desc->nxtdesc_p; } } - dkwgbe->p_rxdesc_curr = dkwgbe->p_rxdesc; + dmvegiga->p_rxdesc_curr = dmvegiga->p_rxdesc; }
-static int kwgbe_init(struct eth_device *dev) +static int mv_egiga_init(struct eth_device *dev) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mv_egiga_device *dmvegiga = to_mv_egiga(dev); + struct mv_egiga_registers *regs = dmvegiga->regs; #if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \ && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN) int i; #endif /* setup RX rings */ - kwgbe_init_rx_desc_ring(dkwgbe); + mv_egiga_init_rx_desc_ring(dmvegiga);
/* Clear the ethernet port interrupts */ - KWGBEREG_WR(regs->ic, 0); - KWGBEREG_WR(regs->ice, 0); + MV_EGIGA_REG_WR(regs->ic, 0); + MV_EGIGA_REG_WR(regs->ice, 0); /* Unmask RX buffer and TX end interrupt */ - KWGBEREG_WR(regs->pim, INT_CAUSE_UNMASK_ALL); + MV_EGIGA_REG_WR(regs->pim, INT_CAUSE_UNMASK_ALL); /* Unmask phy and link status changes interrupts */ - KWGBEREG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT); + MV_EGIGA_REG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT);
set_dram_access(regs); port_init_mac_tables(regs); - port_uc_addr_set(regs, dkwgbe->dev.enetaddr); + port_uc_addr_set(regs, dmvegiga->dev.enetaddr);
/* Assign port configuration and command. */ - KWGBEREG_WR(regs->pxc, PRT_CFG_VAL); - KWGBEREG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE); - KWGBEREG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE); + MV_EGIGA_REG_WR(regs->pxc, PRT_CFG_VAL); + MV_EGIGA_REG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE); + MV_EGIGA_REG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE);
/* Assign port SDMA configuration */ - KWGBEREG_WR(regs->sdc, PORT_SDMA_CFG_VALUE); - KWGBEREG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL); - KWGBEREG_WR(regs->tqx[0].tqxtbc, (QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL); + MV_EGIGA_REG_WR(regs->sdc, PORT_SDMA_CFG_VALUE); + MV_EGIGA_REG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL); + MV_EGIGA_REG_WR(regs->tqx[0].tqxtbc, (QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL); /* Turn off the port/RXUQ bandwidth limitation */ - KWGBEREG_WR(regs->pmtu, 0); + MV_EGIGA_REG_WR(regs->pmtu, 0);
/* Set maximum receive buffer to 9700 bytes */ - KWGBEREG_WR(regs->psc0, KWGBE_MAX_RX_PACKET_9700BYTE - | (KWGBEREG_RD(regs->psc0) & MRU_MASK)); + MV_EGIGA_REG_WR(regs->psc0, MV_EGIGA_MAX_RX_PACKET_9700BYTE + | (MV_EGIGA_REG_RD(regs->psc0) & MRU_MASK));
/* Enable port initially */ - KWGBEREG_BITS_SET(regs->psc0, KWGBE_SERIAL_PORT_EN); + MV_EGIGA_REG_BITS_SET(regs->psc0, MV_EGIGA_SERIAL_PORT_EN);
/* * Set ethernet MTU for leaky bucket mechanism to 0 - this will * disable the leaky bucket mechanism . */ - KWGBEREG_WR(regs->pmtu, 0); + MV_EGIGA_REG_WR(regs->pmtu, 0);
/* Assignment of Rx CRDB of given RXUQ */ - KWGBEREG_WR(regs->rxcdp[RXUQ], (u32) dkwgbe->p_rxdesc_curr); + MV_EGIGA_REG_WR(regs->rxcdp[RXUQ], (u32) dmvegiga->p_rxdesc_curr); /* Enable port Rx. */ - KWGBEREG_WR(regs->rqc, (1 << RXUQ)); + MV_EGIGA_REG_WR(regs->rqc, (1 << RXUQ));
#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \ && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN) @@ -458,8 +462,8 @@ static int kwgbe_init(struct eth_device *dev) for (i = 0; i < 5; i++) { u16 phyadr;
- miiphy_read(dev->name, KIRKWOOD_PHY_ADR_REQUEST, - KIRKWOOD_PHY_ADR_REQUEST, &phyadr); + miiphy_read(dev->name, MV_PHY_ADR_REQUEST, + MV_PHY_ADR_REQUEST, &phyadr); /* Return if we get link up */ if (miiphy_link(dev->name, phyadr)) return 0; @@ -472,50 +476,50 @@ static int kwgbe_init(struct eth_device *dev) return 0; }
-static int kwgbe_halt(struct eth_device *dev) +static int mv_egiga_halt(struct eth_device *dev) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mv_egiga_device *dmvegiga = to_mv_egiga(dev); + struct mv_egiga_registers *regs = dmvegiga->regs;
/* Disable all gigE address decoder */ - KWGBEREG_WR(regs->bare, 0x3f); + MV_EGIGA_REG_WR(regs->bare, 0x3f);
stop_queue(®s->tqc); stop_queue(®s->rqc);
/* Disable port */ - KWGBEREG_BITS_RESET(regs->psc0, KWGBE_SERIAL_PORT_EN); + MV_EGIGA_REG_BITS_RESET(regs->psc0, MV_EGIGA_SERIAL_PORT_EN); /* Set port is not reset */ - KWGBEREG_BITS_RESET(regs->psc1, 1 << 4); + MV_EGIGA_REG_BITS_RESET(regs->psc1, 1 << 4); #ifdef CONFIG_SYS_MII_MODE /* Set MMI interface up */ - KWGBEREG_BITS_RESET(regs->psc1, 1 << 3); + MV_EGIGA_REG_BITS_RESET(regs->psc1, 1 << 3); #endif /* Disable & mask ethernet port interrupts */ - KWGBEREG_WR(regs->ic, 0); - KWGBEREG_WR(regs->ice, 0); - KWGBEREG_WR(regs->pim, 0); - KWGBEREG_WR(regs->peim, 0); + MV_EGIGA_REG_WR(regs->ic, 0); + MV_EGIGA_REG_WR(regs->ice, 0); + MV_EGIGA_REG_WR(regs->pim, 0); + MV_EGIGA_REG_WR(regs->peim, 0);
return 0; }
-static int kwgbe_write_hwaddr(struct eth_device *dev) +static int mv_egiga_write_hwaddr(struct eth_device *dev) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mv_egiga_device *dmvegiga = to_mv_egiga(dev); + struct mv_egiga_registers *regs = dmvegiga->regs;
/* Programs net device MAC address after initialization */ - port_uc_addr_set(regs, dkwgbe->dev.enetaddr); + port_uc_addr_set(regs, dmvegiga->dev.enetaddr); return 0; }
-static int kwgbe_send(struct eth_device *dev, volatile void *dataptr, +static int mv_egiga_send(struct eth_device *dev, volatile void *dataptr, int datasize) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; - struct kwgbe_txdesc *p_txdesc = dkwgbe->p_txdesc; + struct mv_egiga_device *dmvegiga = to_mv_egiga(dev); + struct mv_egiga_registers *regs = dmvegiga->regs; + struct mv_egiga_txdesc *p_txdesc = dmvegiga->p_txdesc; void *p = (void *)dataptr; u32 cmd_sts;
@@ -527,30 +531,30 @@ static int kwgbe_send(struct eth_device *dev, volatile void *dataptr, return -1; }
- memcpy(dkwgbe->p_aligned_txbuf, p, datasize); - p = dkwgbe->p_aligned_txbuf; + memcpy(dmvegiga->p_aligned_txbuf, p, datasize); + p = dmvegiga->p_aligned_txbuf; }
- p_txdesc->cmd_sts = KWGBE_ZERO_PADDING | KWGBE_GEN_CRC; - p_txdesc->cmd_sts |= KWGBE_TX_FIRST_DESC | KWGBE_TX_LAST_DESC; - p_txdesc->cmd_sts |= KWGBE_BUFFER_OWNED_BY_DMA; - p_txdesc->cmd_sts |= KWGBE_TX_EN_INTERRUPT; + p_txdesc->cmd_sts = MV_EGIGA_ZERO_PADDING | MV_EGIGA_GEN_CRC; + p_txdesc->cmd_sts |= MV_EGIGA_TX_FIRST_DESC | MV_EGIGA_TX_LAST_DESC; + p_txdesc->cmd_sts |= MV_EGIGA_BUFFER_OWNED_BY_DMA; + p_txdesc->cmd_sts |= MV_EGIGA_TX_EN_INTERRUPT; p_txdesc->buf_ptr = (u8 *) p; p_txdesc->byte_cnt = datasize;
/* Apply send command using zeroth TXUQ */ - KWGBEREG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc); - KWGBEREG_WR(regs->tqc, (1 << TXUQ)); + MV_EGIGA_REG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc); + MV_EGIGA_REG_WR(regs->tqc, (1 << TXUQ));
/* * wait for packet xmit completion */ cmd_sts = readl(&p_txdesc->cmd_sts); - while (cmd_sts & KWGBE_BUFFER_OWNED_BY_DMA) { + while (cmd_sts & MV_EGIGA_BUFFER_OWNED_BY_DMA) { /* return fail if error is detected */ - if ((cmd_sts & (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME)) == - (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME) && - cmd_sts & (KWGBE_UR_ERROR | KWGBE_RL_ERROR)) { + if ((cmd_sts & (MV_EGIGA_ERROR_SUMMARY | MV_EGIGA_TX_LAST_FRAME)) == + (MV_EGIGA_ERROR_SUMMARY | MV_EGIGA_TX_LAST_FRAME) && + cmd_sts & (MV_EGIGA_UR_ERROR | MV_EGIGA_RL_ERROR)) { printf("Err..(%s) in xmit packet\n", __FUNCTION__); return -1; } @@ -559,22 +563,22 @@ static int kwgbe_send(struct eth_device *dev, volatile void *dataptr, return 0; }
-static int kwgbe_recv(struct eth_device *dev) +static int mv_egiga_recv(struct eth_device *dev) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_rxdesc *p_rxdesc_curr = dkwgbe->p_rxdesc_curr; + struct mv_egiga_device *dmvegiga = to_mv_egiga(dev); + struct mv_egiga_rxdesc *p_rxdesc_curr = dmvegiga->p_rxdesc_curr; u32 cmd_sts; u32 timeout = 0;
/* wait untill rx packet available or timeout */ do { - if (timeout < KWGBE_PHY_SMI_TIMEOUT) + if (timeout < MV_EGIGA_PHY_SMI_TIMEOUT) timeout++; else { debug("%s time out...\n", __FUNCTION__); return -1; } - } while (readl(&p_rxdesc_curr->cmd_sts) & KWGBE_BUFFER_OWNED_BY_DMA); + } while (readl(&p_rxdesc_curr->cmd_sts) & MV_EGIGA_BUFFER_OWNED_BY_DMA);
if (p_rxdesc_curr->byte_cnt != 0) { debug("%s: Received %d byte Packet @ 0x%x (cmd_sts= %08x)\n", @@ -591,13 +595,13 @@ static int kwgbe_recv(struct eth_device *dev) cmd_sts = readl(&p_rxdesc_curr->cmd_sts);
if ((cmd_sts & - (KWGBE_RX_FIRST_DESC | KWGBE_RX_LAST_DESC)) - != (KWGBE_RX_FIRST_DESC | KWGBE_RX_LAST_DESC)) { + (MV_EGIGA_RX_FIRST_DESC | MV_EGIGA_RX_LAST_DESC)) + != (MV_EGIGA_RX_FIRST_DESC | MV_EGIGA_RX_LAST_DESC)) {
printf("Err..(%s) Dropping packet spread on" " multiple descriptors\n", __FUNCTION__);
- } else if (cmd_sts & KWGBE_ERROR_SUMMARY) { + } else if (cmd_sts & MV_EGIGA_ERROR_SUMMARY) {
printf("Err..(%s) Dropping packet with errors\n", __FUNCTION__); @@ -615,62 +619,62 @@ static int kwgbe_recv(struct eth_device *dev) * free these descriptors and point next in the ring */ p_rxdesc_curr->cmd_sts = - KWGBE_BUFFER_OWNED_BY_DMA | KWGBE_RX_EN_INTERRUPT; + MV_EGIGA_BUFFER_OWNED_BY_DMA | MV_EGIGA_RX_EN_INTERRUPT; p_rxdesc_curr->buf_size = PKTSIZE_ALIGN; p_rxdesc_curr->byte_cnt = 0;
- writel((unsigned)p_rxdesc_curr->nxtdesc_p, (u32) &dkwgbe->p_rxdesc_curr); + writel((unsigned)p_rxdesc_curr->nxtdesc_p, (u32) &dmvegiga->p_rxdesc_curr);
return 0; }
-int kirkwood_egiga_initialize(bd_t * bis) +int mv_egiga_initialize(bd_t * bis) { - struct kwgbe_device *dkwgbe; + struct mv_egiga_device *dmvegiga; struct eth_device *dev; int devnum; char *s; - u8 used_ports[MAX_KWGBE_DEVS] = CONFIG_KIRKWOOD_EGIGA_PORTS; + u8 used_ports[MAX_MV_EGIGA_DEVS] = CONFIG_MV_EGIGA_PORTS;
- for (devnum = 0; devnum < MAX_KWGBE_DEVS; devnum++) { + for (devnum = 0; devnum < MAX_MV_EGIGA_DEVS; devnum++) { /*skip if port is configured not to use */ if (used_ports[devnum] == 0) continue;
- if (!(dkwgbe = malloc(sizeof(struct kwgbe_device)))) + if (!(dmvegiga = malloc(sizeof(struct mv_egiga_device)))) goto error1;
- memset(dkwgbe, 0, sizeof(struct kwgbe_device)); + memset(dmvegiga, 0, sizeof(struct mv_egiga_device));
- if (!(dkwgbe->p_rxdesc = - (struct kwgbe_rxdesc *)memalign(PKTALIGN, - KW_RXQ_DESC_ALIGNED_SIZE + if (!(dmvegiga->p_rxdesc = + (struct mv_egiga_rxdesc *)memalign(PKTALIGN, + MV_RXQ_DESC_ALIGNED_SIZE * RINGSZ + 1))) goto error2;
- if (!(dkwgbe->p_rxbuf = (u8 *) memalign(PKTALIGN, RINGSZ + if (!(dmvegiga->p_rxbuf = (u8 *) memalign(PKTALIGN, RINGSZ * PKTSIZE_ALIGN + 1))) goto error3;
- if (!(dkwgbe->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN))) + if (!(dmvegiga->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN))) goto error4;
- if (!(dkwgbe->p_txdesc = (struct kwgbe_txdesc *) - memalign(PKTALIGN, sizeof(struct kwgbe_txdesc) + 1))) { - free(dkwgbe->p_aligned_txbuf); + if (!(dmvegiga->p_txdesc = (struct mv_egiga_txdesc *) + memalign(PKTALIGN, sizeof(struct mv_egiga_txdesc) + 1))) { + free(dmvegiga->p_aligned_txbuf); error4: - free(dkwgbe->p_rxbuf); + free(dmvegiga->p_rxbuf); error3: - free(dkwgbe->p_rxdesc); + free(dmvegiga->p_rxdesc); error2: - free(dkwgbe); + free(dmvegiga); error1: printf("Err.. %s Failed to allocate memory\n", __FUNCTION__); return -1; }
- dev = &dkwgbe->dev; + dev = &dmvegiga->dev;
/* must be less than NAMESIZE (16) */ sprintf(dev->name, "egiga%d", devnum); @@ -678,13 +682,15 @@ int kirkwood_egiga_initialize(bd_t * bis) /* Extract the MAC address from the environment */ switch (devnum) { case 0: - dkwgbe->regs = (void *)KW_EGIGA0_BASE; + dmvegiga->regs = (void *)MV_EGIGA0_BASE; s = "ethaddr"; break; +#if defined (MV_EGIGA1_BASE) case 1: - dkwgbe->regs = (void *)KW_EGIGA1_BASE; + dmvegiga->regs = (void *)MV_EGIGA1_BASE; s = "eth1addr"; break; +#endif default: /* this should never happen */ printf("Err..(%s) Invalid device number %d\n", __FUNCTION__, devnum); @@ -702,19 +708,19 @@ int kirkwood_egiga_initialize(bd_t * bis) eth_setenv_enetaddr(s, dev->enetaddr); }
- dev->init = (void *)kwgbe_init; - dev->halt = (void *)kwgbe_halt; - dev->send = (void *)kwgbe_send; - dev->recv = (void *)kwgbe_recv; - dev->write_hwaddr = (void *)kwgbe_write_hwaddr; + dev->init = (void *)mv_egiga_init; + dev->halt = (void *)mv_egiga_halt; + dev->send = (void *)mv_egiga_send; + dev->recv = (void *)mv_egiga_recv; + dev->write_hwaddr = (void *)mv_egiga_write_hwaddr;
eth_register(dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register(dev->name, smi_reg_read, smi_reg_write); /* Set phy address of the port */ - miiphy_write(dev->name, KIRKWOOD_PHY_ADR_REQUEST, - KIRKWOOD_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum); + miiphy_write(dev->name, MV_PHY_ADR_REQUEST, + MV_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum); #endif } return 0; diff --git a/drivers/net/mv_egiga.h b/drivers/net/mv_egiga.h index 30c773c..61c3157 100644 --- a/drivers/net/mv_egiga.h +++ b/drivers/net/mv_egiga.h @@ -28,7 +28,7 @@ #ifndef __EGIGA_H__ #define __EGIGA_H__
-#define MAX_KWGBE_DEVS 2 /*controller has two ports */ +#define MAX_MV_EGIGA_DEVS 2 /*controller has two ports */
/* PHY_BASE_ADR is board specific and can be configured */ #if defined (CONFIG_PHY_BASE_ADR) @@ -49,60 +49,60 @@ #define RXUQ 0 /* Used Rx queue */ #define TXUQ 0 /* Used Rx queue */
-#define to_dkwgbe(_kd) container_of(_kd, struct kwgbe_device, dev) -#define KWGBEREG_WR(adr, val) writel(val, &adr) -#define KWGBEREG_RD(adr) readl(&adr) -#define KWGBEREG_BITS_RESET(adr, val) writel(readl(&adr) & ~(val), &adr) -#define KWGBEREG_BITS_SET(adr, val) writel(readl(&adr) | val, &adr) +#define to_mv_egiga(_d) container_of(_d, struct mv_egiga_device, dev) +#define MV_EGIGA_REG_WR(adr, val) writel(val, &adr) +#define MV_EGIGA_REG_RD(adr) readl(&adr) +#define MV_EGIGA_REG_BITS_RESET(adr, val) writel(readl(&adr) & ~(val), &adr) +#define MV_EGIGA_REG_BITS_SET(adr, val) writel(readl(&adr) | val, &adr)
/* Default port configuration value */ #define PRT_CFG_VAL ( \ - KWGBE_UCAST_MOD_NRML | \ - KWGBE_DFLT_RXQ(RXUQ) | \ - KWGBE_DFLT_RX_ARPQ(RXUQ) | \ - KWGBE_RX_BC_IF_NOT_IP_OR_ARP | \ - KWGBE_RX_BC_IF_IP | \ - KWGBE_RX_BC_IF_ARP | \ - KWGBE_CPTR_TCP_FRMS_DIS | \ - KWGBE_CPTR_UDP_FRMS_DIS | \ - KWGBE_DFLT_RX_TCPQ(RXUQ) | \ - KWGBE_DFLT_RX_UDPQ(RXUQ) | \ - KWGBE_DFLT_RX_BPDUQ(RXUQ)) + MV_EGIGA_UCAST_MOD_NRML | \ + MV_EGIGA_DFLT_RXQ(RXUQ) | \ + MV_EGIGA_DFLT_RX_ARPQ(RXUQ) | \ + MV_EGIGA_RX_BC_IF_NOT_IP_OR_ARP | \ + MV_EGIGA_RX_BC_IF_IP | \ + MV_EGIGA_RX_BC_IF_ARP | \ + MV_EGIGA_CPTR_TCP_FRMS_DIS | \ + MV_EGIGA_CPTR_UDP_FRMS_DIS | \ + MV_EGIGA_DFLT_RX_TCPQ(RXUQ) | \ + MV_EGIGA_DFLT_RX_UDPQ(RXUQ) | \ + MV_EGIGA_DFLT_RX_BPDUQ(RXUQ))
/* Default port extend configuration value */ #define PORT_CFG_EXTEND_VALUE \ - KWGBE_SPAN_BPDU_PACKETS_AS_NORMAL | \ - KWGBE_PARTITION_DIS | \ - KWGBE_TX_CRC_GENERATION_EN + MV_EGIGA_SPAN_BPDU_PACKETS_AS_NORMAL | \ + MV_EGIGA_PARTITION_DIS | \ + MV_EGIGA_TX_CRC_GENERATION_EN
-#define GT_KWGBE_IPG_INT_RX(value) ((value & 0x3fff) << 8) +#define GT_MV_EGIGA_IPG_INT_RX(value) ((value & 0x3fff) << 8)
/* Default sdma control value */ #define PORT_SDMA_CFG_VALUE ( \ - KWGBE_RX_BURST_SIZE_16_64BIT | \ - KWGBE_BLM_RX_NO_SWAP | \ - KWGBE_BLM_TX_NO_SWAP | \ - GT_KWGBE_IPG_INT_RX(RXUQ) | \ - KWGBE_TX_BURST_SIZE_16_64BIT) + MV_EGIGA_RX_BURST_SIZE_16_64BIT | \ + MV_EGIGA_BLM_RX_NO_SWAP | \ + MV_EGIGA_BLM_TX_NO_SWAP | \ + GT_MV_EGIGA_IPG_INT_RX(RXUQ) | \ + MV_EGIGA_TX_BURST_SIZE_16_64BIT)
/* Default port serial control value */ #define PORT_SERIAL_CONTROL_VALUE ( \ - KWGBE_FORCE_LINK_PASS | \ - KWGBE_DIS_AUTO_NEG_FOR_DUPLX | \ - KWGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ - KWGBE_ADV_NO_FLOW_CTRL | \ - KWGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - KWGBE_FORCE_BP_MODE_NO_JAM | \ + MV_EGIGA_FORCE_LINK_PASS | \ + MV_EGIGA_DIS_AUTO_NEG_FOR_DUPLX | \ + MV_EGIGA_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ + MV_EGIGA_ADV_NO_FLOW_CTRL | \ + MV_EGIGA_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + MV_EGIGA_FORCE_BP_MODE_NO_JAM | \ (1 << 9) /* Reserved bit has to be 1 */ | \ - KWGBE_DO_NOT_FORCE_LINK_FAIL | \ - KWGBE_EN_AUTO_NEG_SPEED_GMII | \ - KWGBE_DTE_ADV_0 | \ - KWGBE_MIIPHY_MAC_MODE | \ - KWGBE_AUTO_NEG_NO_CHANGE | \ - KWGBE_MAX_RX_PACKET_1552BYTE | \ - KWGBE_CLR_EXT_LOOPBACK | \ - KWGBE_SET_FULL_DUPLEX_MODE | \ - KWGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX) + MV_EGIGA_DO_NOT_FORCE_LINK_FAIL | \ + MV_EGIGA_EN_AUTO_NEG_SPEED_GMII | \ + MV_EGIGA_DTE_ADV_0 | \ + MV_EGIGA_MIIPHY_MAC_MODE | \ + MV_EGIGA_AUTO_NEG_NO_CHANGE | \ + MV_EGIGA_MAX_RX_PACKET_1552BYTE | \ + MV_EGIGA_CLR_EXT_LOOPBACK | \ + MV_EGIGA_SET_FULL_DUPLEX_MODE | \ + MV_EGIGA_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX)
/* Tx WRR confoguration macros */ #define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */ @@ -112,187 +112,187 @@ #define ACCEPT_MAC_ADDR 0 #define REJECT_MAC_ADDR 1 /* Size of a Tx/Rx descriptor used in chain list data structure */ -#define KW_RXQ_DESC_ALIGNED_SIZE \ - (((sizeof(struct kwgbe_rxdesc) / PKTALIGN) + 1) * PKTALIGN) +#define MV_RXQ_DESC_ALIGNED_SIZE \ + (((sizeof(struct mv_egiga_rxdesc) / PKTALIGN) + 1) * PKTALIGN) /* Buffer offset from buffer pointer */ #define RX_BUF_OFFSET 0x2
/* Port serial status reg (PSR) */ -#define KWGBE_INTERFACE_GMII_MII 0 -#define KWGBE_INTERFACE_PCM 1 -#define KWGBE_LINK_IS_DOWN 0 -#define KWGBE_LINK_IS_UP (1 << 1) -#define KWGBE_PORT_AT_HALF_DUPLEX 0 -#define KWGBE_PORT_AT_FULL_DUPLEX (1 << 2) -#define KWGBE_RX_FLOW_CTRL_DISD 0 -#define KWGBE_RX_FLOW_CTRL_ENBALED (1 << 3) -#define KWGBE_GMII_SPEED_100_10 0 -#define KWGBE_GMII_SPEED_1000 (1 << 4) -#define KWGBE_MII_SPEED_10 0 -#define KWGBE_MII_SPEED_100 (1 << 5) -#define KWGBE_NO_TX 0 -#define KWGBE_TX_IN_PROGRESS (1 << 7) -#define KWGBE_BYPASS_NO_ACTIVE 0 -#define KWGBE_BYPASS_ACTIVE (1 << 8) -#define KWGBE_PORT_NOT_AT_PARTN_STT 0 -#define KWGBE_PORT_AT_PARTN_STT (1 << 9) -#define KWGBE_PORT_TX_FIFO_NOT_EMPTY 0 -#define KWGBE_PORT_TX_FIFO_EMPTY (1 << 10) +#define MV_EGIGA_INTERFACE_GMII_MII 0 +#define MV_EGIGA_INTERFACE_PCM 1 +#define MV_EGIGA_LINK_IS_DOWN 0 +#define MV_EGIGA_LINK_IS_UP (1 << 1) +#define MV_EGIGA_PORT_AT_HALF_DUPLEX 0 +#define MV_EGIGA_PORT_AT_FULL_DUPLEX (1 << 2) +#define MV_EGIGA_RX_FLOW_CTRL_DISD 0 +#define MV_EGIGA_RX_FLOW_CTRL_ENBALED (1 << 3) +#define MV_EGIGA_GMII_SPEED_100_10 0 +#define MV_EGIGA_GMII_SPEED_1000 (1 << 4) +#define MV_EGIGA_MII_SPEED_10 0 +#define MV_EGIGA_MII_SPEED_100 (1 << 5) +#define MV_EGIGA_NO_TX 0 +#define MV_EGIGA_TX_IN_PROGRESS (1 << 7) +#define MV_EGIGA_BYPASS_NO_ACTIVE 0 +#define MV_EGIGA_BYPASS_ACTIVE (1 << 8) +#define MV_EGIGA_PORT_NOT_AT_PARTN_STT 0 +#define MV_EGIGA_PORT_AT_PARTN_STT (1 << 9) +#define MV_EGIGA_PORT_TX_FIFO_NOT_EMPTY 0 +#define MV_EGIGA_PORT_TX_FIFO_EMPTY (1 << 10)
/* These macros describes the Port configuration reg (Px_cR) bits */ -#define KWGBE_UCAST_MOD_NRML 0 -#define KWGBE_UNICAST_PROMISCUOUS_MODE 1 -#define KWGBE_DFLT_RXQ(_x) (_x << 1) -#define KWGBE_DFLT_RX_ARPQ(_x) (_x << 4) -#define KWGBE_RX_BC_IF_NOT_IP_OR_ARP 0 -#define KWGBE_REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7) -#define KWGBE_RX_BC_IF_IP 0 -#define KWGBE_REJECT_BC_IF_IP (1 << 8) -#define KWGBE_RX_BC_IF_ARP 0 -#define KWGBE_REJECT_BC_IF_ARP (1 << 9) -#define KWGBE_TX_AM_NO_UPDATE_ERR_SMRY (1 << 12) -#define KWGBE_CPTR_TCP_FRMS_DIS 0 -#define KWGBE_CPTR_TCP_FRMS_EN (1 << 14) -#define KWGBE_CPTR_UDP_FRMS_DIS 0 -#define KWGBE_CPTR_UDP_FRMS_EN (1 << 15) -#define KWGBE_DFLT_RX_TCPQ(_x) (_x << 16) -#define KWGBE_DFLT_RX_UDPQ(_x) (_x << 19) -#define KWGBE_DFLT_RX_BPDUQ(_x) (_x << 22) -#define KWGBE_DFLT_RX_TCP_CHKSUM_MODE (1 << 25) +#define MV_EGIGA_UCAST_MOD_NRML 0 +#define MV_EGIGA_UNICAST_PROMISCUOUS_MODE 1 +#define MV_EGIGA_DFLT_RXQ(_x) (_x << 1) +#define MV_EGIGA_DFLT_RX_ARPQ(_x) (_x << 4) +#define MV_EGIGA_RX_BC_IF_NOT_IP_OR_ARP 0 +#define MV_EGIGA_REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7) +#define MV_EGIGA_RX_BC_IF_IP 0 +#define MV_EGIGA_REJECT_BC_IF_IP (1 << 8) +#define MV_EGIGA_RX_BC_IF_ARP 0 +#define MV_EGIGA_REJECT_BC_IF_ARP (1 << 9) +#define MV_EGIGA_TX_AM_NO_UPDATE_ERR_SMRY (1 << 12) +#define MV_EGIGA_CPTR_TCP_FRMS_DIS 0 +#define MV_EGIGA_CPTR_TCP_FRMS_EN (1 << 14) +#define MV_EGIGA_CPTR_UDP_FRMS_DIS 0 +#define MV_EGIGA_CPTR_UDP_FRMS_EN (1 << 15) +#define MV_EGIGA_DFLT_RX_TCPQ(_x) (_x << 16) +#define MV_EGIGA_DFLT_RX_UDPQ(_x) (_x << 19) +#define MV_EGIGA_DFLT_RX_BPDUQ(_x) (_x << 22) +#define MV_EGIGA_DFLT_RX_TCP_CHKSUM_MODE (1 << 25)
/* These macros describes the Port configuration extend reg (Px_cXR) bits*/ -#define KWGBE_CLASSIFY_EN 1 -#define KWGBE_SPAN_BPDU_PACKETS_AS_NORMAL 0 -#define KWGBE_SPAN_BPDU_PACKETS_TO_RX_Q7 (1 << 1) -#define KWGBE_PARTITION_DIS 0 -#define KWGBE_PARTITION_EN (1 << 2) -#define KWGBE_TX_CRC_GENERATION_EN 0 -#define KWGBE_TX_CRC_GENERATION_DIS (1 << 3) +#define MV_EGIGA_CLASSIFY_EN 1 +#define MV_EGIGA_SPAN_BPDU_PACKETS_AS_NORMAL 0 +#define MV_EGIGA_SPAN_BPDU_PACKETS_TO_RX_Q7 (1 << 1) +#define MV_EGIGA_PARTITION_DIS 0 +#define MV_EGIGA_PARTITION_EN (1 << 2) +#define MV_EGIGA_TX_CRC_GENERATION_EN 0 +#define MV_EGIGA_TX_CRC_GENERATION_DIS (1 << 3)
/* These macros describes the Port Sdma configuration reg (SDCR) bits */ -#define KWGBE_RIFB 1 -#define KWGBE_RX_BURST_SIZE_1_64BIT 0 -#define KWGBE_RX_BURST_SIZE_2_64BIT (1 << 1) -#define KWGBE_RX_BURST_SIZE_4_64BIT (1 << 2) -#define KWGBE_RX_BURST_SIZE_8_64BIT ((1 << 2) | (1 << 1)) -#define KWGBE_RX_BURST_SIZE_16_64BIT (1 << 3) -#define KWGBE_BLM_RX_NO_SWAP (1 << 4) -#define KWGBE_BLM_RX_BYTE_SWAP 0 -#define KWGBE_BLM_TX_NO_SWAP (1 << 5) -#define KWGBE_BLM_TX_BYTE_SWAP 0 -#define KWGBE_DESCRIPTORS_BYTE_SWAP (1 << 6) -#define KWGBE_DESCRIPTORS_NO_SWAP 0 -#define KWGBE_TX_BURST_SIZE_1_64BIT 0 -#define KWGBE_TX_BURST_SIZE_2_64BIT (1 << 22) -#define KWGBE_TX_BURST_SIZE_4_64BIT (1 << 23) -#define KWGBE_TX_BURST_SIZE_8_64BIT ((1 << 23) | (1 << 22)) -#define KWGBE_TX_BURST_SIZE_16_64BIT (1 << 24) +#define MV_EGIGA_RIFB 1 +#define MV_EGIGA_RX_BURST_SIZE_1_64BIT 0 +#define MV_EGIGA_RX_BURST_SIZE_2_64BIT (1 << 1) +#define MV_EGIGA_RX_BURST_SIZE_4_64BIT (1 << 2) +#define MV_EGIGA_RX_BURST_SIZE_8_64BIT ((1 << 2) | (1 << 1)) +#define MV_EGIGA_RX_BURST_SIZE_16_64BIT (1 << 3) +#define MV_EGIGA_BLM_RX_NO_SWAP (1 << 4) +#define MV_EGIGA_BLM_RX_BYTE_SWAP 0 +#define MV_EGIGA_BLM_TX_NO_SWAP (1 << 5) +#define MV_EGIGA_BLM_TX_BYTE_SWAP 0 +#define MV_EGIGA_DESCRIPTORS_BYTE_SWAP (1 << 6) +#define MV_EGIGA_DESCRIPTORS_NO_SWAP 0 +#define MV_EGIGA_TX_BURST_SIZE_1_64BIT 0 +#define MV_EGIGA_TX_BURST_SIZE_2_64BIT (1 << 22) +#define MV_EGIGA_TX_BURST_SIZE_4_64BIT (1 << 23) +#define MV_EGIGA_TX_BURST_SIZE_8_64BIT ((1 << 23) | (1 << 22)) +#define MV_EGIGA_TX_BURST_SIZE_16_64BIT (1 << 24)
/* These macros describes the Port serial control reg (PSCR) bits */ -#define KWGBE_SERIAL_PORT_DIS 0 -#define KWGBE_SERIAL_PORT_EN 1 -#define KWGBE_FORCE_LINK_PASS (1 << 1) -#define KWGBE_DO_NOT_FORCE_LINK_PASS 0 -#define KWGBE_EN_AUTO_NEG_FOR_DUPLX 0 -#define KWGBE_DIS_AUTO_NEG_FOR_DUPLX (1 << 2) -#define KWGBE_EN_AUTO_NEG_FOR_FLOW_CTRL 0 -#define KWGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL (1 << 3) -#define KWGBE_ADV_NO_FLOW_CTRL 0 -#define KWGBE_ADV_SYMMETRIC_FLOW_CTRL (1 << 4) -#define KWGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0 -#define KWGBE_FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5) -#define KWGBE_FORCE_BP_MODE_NO_JAM 0 -#define KWGBE_FORCE_BP_MODE_JAM_TX (1 << 7) -#define KWGBE_FORCE_BP_MODE_JAM_TX_ON_RX_ERR (1 << 8) -#define KWGBE_FORCE_LINK_FAIL 0 -#define KWGBE_DO_NOT_FORCE_LINK_FAIL (1 << 10) -#define KWGBE_DIS_AUTO_NEG_SPEED_GMII (1 << 13) -#define KWGBE_EN_AUTO_NEG_SPEED_GMII 0 -#define KWGBE_DTE_ADV_0 0 -#define KWGBE_DTE_ADV_1 (1 << 14) -#define KWGBE_MIIPHY_MAC_MODE 0 -#define KWGBE_MIIPHY_PHY_MODE (1 << 15) -#define KWGBE_AUTO_NEG_NO_CHANGE 0 -#define KWGBE_RESTART_AUTO_NEG (1 << 16) -#define KWGBE_MAX_RX_PACKET_1518BYTE 0 -#define KWGBE_MAX_RX_PACKET_1522BYTE (1 << 17) -#define KWGBE_MAX_RX_PACKET_1552BYTE (1 << 18) -#define KWGBE_MAX_RX_PACKET_9022BYTE ((1 << 18) | (1 << 17)) -#define KWGBE_MAX_RX_PACKET_9192BYTE (1 << 19) -#define KWGBE_MAX_RX_PACKET_9700BYTE ((1 << 19) | (1 << 17)) -#define KWGBE_SET_EXT_LOOPBACK (1 << 20) -#define KWGBE_CLR_EXT_LOOPBACK 0 -#define KWGBE_SET_FULL_DUPLEX_MODE (1 << 21) -#define KWGBE_SET_HALF_DUPLEX_MODE 0 -#define KWGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22) -#define KWGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0 -#define KWGBE_SET_GMII_SPEED_TO_10_100 0 -#define KWGBE_SET_GMII_SPEED_TO_1000 (1 << 23) -#define KWGBE_SET_MII_SPEED_TO_10 0 -#define KWGBE_SET_MII_SPEED_TO_100 (1 << 24) +#define MV_EGIGA_SERIAL_PORT_DIS 0 +#define MV_EGIGA_SERIAL_PORT_EN 1 +#define MV_EGIGA_FORCE_LINK_PASS (1 << 1) +#define MV_EGIGA_DO_NOT_FORCE_LINK_PASS 0 +#define MV_EGIGA_EN_AUTO_NEG_FOR_DUPLX 0 +#define MV_EGIGA_DIS_AUTO_NEG_FOR_DUPLX (1 << 2) +#define MV_EGIGA_EN_AUTO_NEG_FOR_FLOW_CTRL 0 +#define MV_EGIGA_DIS_AUTO_NEG_FOR_FLOW_CTRL (1 << 3) +#define MV_EGIGA_ADV_NO_FLOW_CTRL 0 +#define MV_EGIGA_ADV_SYMMETRIC_FLOW_CTRL (1 << 4) +#define MV_EGIGA_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0 +#define MV_EGIGA_FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5) +#define MV_EGIGA_FORCE_BP_MODE_NO_JAM 0 +#define MV_EGIGA_FORCE_BP_MODE_JAM_TX (1 << 7) +#define MV_EGIGA_FORCE_BP_MODE_JAM_TX_ON_RX_ERR (1 << 8) +#define MV_EGIGA_FORCE_LINK_FAIL 0 +#define MV_EGIGA_DO_NOT_FORCE_LINK_FAIL (1 << 10) +#define MV_EGIGA_DIS_AUTO_NEG_SPEED_GMII (1 << 13) +#define MV_EGIGA_EN_AUTO_NEG_SPEED_GMII 0 +#define MV_EGIGA_DTE_ADV_0 0 +#define MV_EGIGA_DTE_ADV_1 (1 << 14) +#define MV_EGIGA_MIIPHY_MAC_MODE 0 +#define MV_EGIGA_MIIPHY_PHY_MODE (1 << 15) +#define MV_EGIGA_AUTO_NEG_NO_CHANGE 0 +#define MV_EGIGA_RESTART_AUTO_NEG (1 << 16) +#define MV_EGIGA_MAX_RX_PACKET_1518BYTE 0 +#define MV_EGIGA_MAX_RX_PACKET_1522BYTE (1 << 17) +#define MV_EGIGA_MAX_RX_PACKET_1552BYTE (1 << 18) +#define MV_EGIGA_MAX_RX_PACKET_9022BYTE ((1 << 18) | (1 << 17)) +#define MV_EGIGA_MAX_RX_PACKET_9192BYTE (1 << 19) +#define MV_EGIGA_MAX_RX_PACKET_9700BYTE ((1 << 19) | (1 << 17)) +#define MV_EGIGA_SET_EXT_LOOPBACK (1 << 20) +#define MV_EGIGA_CLR_EXT_LOOPBACK 0 +#define MV_EGIGA_SET_FULL_DUPLEX_MODE (1 << 21) +#define MV_EGIGA_SET_HALF_DUPLEX_MODE 0 +#define MV_EGIGA_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22) +#define MV_EGIGA_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0 +#define MV_EGIGA_SET_GMII_SPEED_TO_10_100 0 +#define MV_EGIGA_SET_GMII_SPEED_TO_1000 (1 << 23) +#define MV_EGIGA_SET_MII_SPEED_TO_10 0 +#define MV_EGIGA_SET_MII_SPEED_TO_100 (1 << 24)
/* SMI register fields */ -#define KWGBE_PHY_SMI_TIMEOUT 10000 -#define KWGBE_PHY_SMI_DATA_OFFS 0 /* Data */ -#define KWGBE_PHY_SMI_DATA_MASK (0xffff << KWGBE_PHY_SMI_DATA_OFFS) -#define KWGBE_PHY_SMI_DEV_ADDR_OFFS 16 /* PHY device address */ -#define KWGBE_PHY_SMI_DEV_ADDR_MASK (PHYADR_MASK << KWGBE_PHY_SMI_DEV_ADDR_OFFS) -#define KWGBE_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr */ -#define KWGBE_SMI_REG_ADDR_MASK (PHYADR_MASK << KWGBE_SMI_REG_ADDR_OFFS) -#define KWGBE_PHY_SMI_OPCODE_OFFS 26 /* Write/Read opcode */ -#define KWGBE_PHY_SMI_OPCODE_MASK (3 << KWGBE_PHY_SMI_OPCODE_OFFS) -#define KWGBE_PHY_SMI_OPCODE_WRITE (0 << KWGBE_PHY_SMI_OPCODE_OFFS) -#define KWGBE_PHY_SMI_OPCODE_READ (1 << KWGBE_PHY_SMI_OPCODE_OFFS) -#define KWGBE_PHY_SMI_READ_VALID_MASK (1 << 27) /* Read Valid */ -#define KWGBE_PHY_SMI_BUSY_MASK (1 << 28) /* Busy */ +#define MV_EGIGA_PHY_SMI_TIMEOUT 10000 +#define MV_EGIGA_PHY_SMI_DATA_OFFS 0 /* Data */ +#define MV_EGIGA_PHY_SMI_DATA_MASK (0xffff << MV_EGIGA_PHY_SMI_DATA_OFFS) +#define MV_EGIGA_PHY_SMI_DEV_ADDR_OFFS 16 /* PHY device address */ +#define MV_EGIGA_PHY_SMI_DEV_ADDR_MASK (PHYADR_MASK << MV_EGIGA_PHY_SMI_DEV_ADDR_OFFS) +#define MV_EGIGA_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr */ +#define MV_EGIGA_SMI_REG_ADDR_MASK (PHYADR_MASK << MV_EGIGA_SMI_REG_ADDR_OFFS) +#define MV_EGIGA_PHY_SMI_OPCODE_OFFS 26 /* Write/Read opcode */ +#define MV_EGIGA_PHY_SMI_OPCODE_MASK (3 << MV_EGIGA_PHY_SMI_OPCODE_OFFS) +#define MV_EGIGA_PHY_SMI_OPCODE_WRITE (0 << MV_EGIGA_PHY_SMI_OPCODE_OFFS) +#define MV_EGIGA_PHY_SMI_OPCODE_READ (1 << MV_EGIGA_PHY_SMI_OPCODE_OFFS) +#define MV_EGIGA_PHY_SMI_READ_VALID_MASK (1 << 27) /* Read Valid */ +#define MV_EGIGA_PHY_SMI_BUSY_MASK (1 << 28) /* Busy */
/* SDMA command status fields macros */ /* Tx & Rx descriptors status */ -#define KWGBE_ERROR_SUMMARY 1 +#define MV_EGIGA_ERROR_SUMMARY 1 /* Tx & Rx descriptors command */ -#define KWGBE_BUFFER_OWNED_BY_DMA (1 << 31) +#define MV_EGIGA_BUFFER_OWNED_BY_DMA (1 << 31) /* Tx descriptors status */ -#define KWGBE_LC_ERROR 0 -#define KWGBE_UR_ERROR (1 << 1) -#define KWGBE_RL_ERROR (1 << 2) -#define KWGBE_LLC_SNAP_FORMAT (1 << 9) -#define KWGBE_TX_LAST_FRAME (1 << 20) +#define MV_EGIGA_LC_ERROR 0 +#define MV_EGIGA_UR_ERROR (1 << 1) +#define MV_EGIGA_RL_ERROR (1 << 2) +#define MV_EGIGA_LLC_SNAP_FORMAT (1 << 9) +#define MV_EGIGA_TX_LAST_FRAME (1 << 20)
/* Rx descriptors status */ -#define KWGBE_CRC_ERROR 0 -#define KWGBE_OVERRUN_ERROR (1 << 1) -#define KWGBE_MAX_FRAME_LENGTH_ERROR (1 << 2) -#define KWGBE_RESOURCE_ERROR ((1 << 2) | (1 << 1)) -#define KWGBE_VLAN_TAGGED (1 << 19) -#define KWGBE_BPDU_FRAME (1 << 20) -#define KWGBE_TCP_FRAME_OVER_IP_V_4 0 -#define KWGBE_UDP_FRAME_OVER_IP_V_4 (1 << 21) -#define KWGBE_OTHER_FRAME_TYPE (1 << 22) -#define KWGBE_LAYER_2_IS_KWGBE_V_2 (1 << 23) -#define KWGBE_FRAME_TYPE_IP_V_4 (1 << 24) -#define KWGBE_FRAME_HEADER_OK (1 << 25) -#define KWGBE_RX_LAST_DESC (1 << 26) -#define KWGBE_RX_FIRST_DESC (1 << 27) -#define KWGBE_UNKNOWN_DESTINATION_ADDR (1 << 28) -#define KWGBE_RX_EN_INTERRUPT (1 << 29) -#define KWGBE_LAYER_4_CHECKSUM_OK (1 << 30) +#define MV_EGIGA_CRC_ERROR 0 +#define MV_EGIGA_OVERRUN_ERROR (1 << 1) +#define MV_EGIGA_MAX_FRAME_LENGTH_ERROR (1 << 2) +#define MV_EGIGA_RESOURCE_ERROR ((1 << 2) | (1 << 1)) +#define MV_EGIGA_VLAN_TAGGED (1 << 19) +#define MV_EGIGA_BPDU_FRAME (1 << 20) +#define MV_EGIGA_TCP_FRAME_OVER_IP_V_4 0 +#define MV_EGIGA_UDP_FRAME_OVER_IP_V_4 (1 << 21) +#define MV_EGIGA_OTHER_FRAME_TYPE (1 << 22) +#define MV_EGIGA_LAYER_2_IS_MV_EGIGA_V_2 (1 << 23) +#define MV_EGIGA_FRAME_TYPE_IP_V_4 (1 << 24) +#define MV_EGIGA_FRAME_HEADER_OK (1 << 25) +#define MV_EGIGA_RX_LAST_DESC (1 << 26) +#define MV_EGIGA_RX_FIRST_DESC (1 << 27) +#define MV_EGIGA_UNKNOWN_DESTINATION_ADDR (1 << 28) +#define MV_EGIGA_RX_EN_INTERRUPT (1 << 29) +#define MV_EGIGA_LAYER_4_CHECKSUM_OK (1 << 30)
/* Rx descriptors byte count */ -#define KWGBE_FRAME_FRAGMENTED (1 << 2) +#define MV_EGIGA_FRAME_FRAGMENTED (1 << 2)
/* Tx descriptors command */ -#define KWGBE_LAYER_4_CHECKSUM_FIRST_DESC (1 << 10) -#define KWGBE_FRAME_SET_TO_VLAN (1 << 15) -#define KWGBE_TCP_FRAME 0 -#define KWGBE_UDP_FRAME (1 << 16) -#define KWGBE_GEN_TCP_UDP_CHECKSUM (1 << 17) -#define KWGBE_GEN_IP_V_4_CHECKSUM (1 << 18) -#define KWGBE_ZERO_PADDING (1 << 19) -#define KWGBE_TX_LAST_DESC (1 << 20) -#define KWGBE_TX_FIRST_DESC (1 << 21) -#define KWGBE_GEN_CRC (1 << 22) -#define KWGBE_TX_EN_INTERRUPT (1 << 23) -#define KWGBE_AUTO_MODE (1 << 30) +#define MV_EGIGA_LAYER_4_CHECKSUM_FIRST_DESC (1 << 10) +#define MV_EGIGA_FRAME_SET_TO_VLAN (1 << 15) +#define MV_EGIGA_TCP_FRAME 0 +#define MV_EGIGA_UDP_FRAME (1 << 16) +#define MV_EGIGA_GEN_TCP_UDP_CHECKSUM (1 << 17) +#define MV_EGIGA_GEN_IP_V_4_CHECKSUM (1 << 18) +#define MV_EGIGA_ZERO_PADDING (1 << 19) +#define MV_EGIGA_TX_LAST_DESC (1 << 20) +#define MV_EGIGA_TX_FIRST_DESC (1 << 21) +#define MV_EGIGA_GEN_CRC (1 << 22) +#define MV_EGIGA_TX_EN_INTERRUPT (1 << 23) +#define MV_EGIGA_AUTO_MODE (1 << 30)
/* Address decode parameters */ /* Ethernet Base Address Register bits */ @@ -341,24 +341,24 @@ #define EWIN_ACCESS_FULL ((1 << 1) | 1)
/* structures represents Controller registers */ -struct kwgbe_barsz { +struct mv_egiga_barsz { u32 bar; u32 size; };
-struct kwgbe_rxcdp { - struct kwgbe_rxdesc *rxcdp; +struct mv_egiga_rxcdp { + struct mv_egiga_rxdesc *rxcdp; u32 rxcdp_pad[3]; };
-struct kwgbe_tqx { +struct mv_egiga_tqx { u32 qxttbc; u32 tqxtbc; u32 tqxac; u32 tqxpad; };
-struct kwgbe_registers { +struct mv_egiga_registers { u32 phyadr; u32 smi; u32 euda; @@ -372,7 +372,7 @@ struct kwgbe_registers { u8 pad3[0x0b0 - 0x098 - 4]; u32 euc; u8 pad3a[0x200 - 0x0b0 - 4]; - struct kwgbe_barsz barsz[6]; + struct mv_egiga_barsz barsz[6]; u8 pad4[0x280 - 0x22c - 4]; u32 ha_remap[4]; u32 bare; @@ -417,14 +417,14 @@ struct kwgbe_registers { u32 pmtu; u32 pmtbs; u8 pad14[0x60c - 0x4ec - 4]; - struct kwgbe_rxcdp rxcdp[7]; - struct kwgbe_rxdesc *rxcdp7; + struct mv_egiga_rxcdp rxcdp[7]; + struct mv_egiga_rxdesc *rxcdp7; u32 rqc; - struct kwgbe_txdesc *tcsdp; + struct mv_egiga_txdesc *tcsdp; u8 pad15[0x6c0 - 0x684 - 4]; - struct kwgbe_txdesc *tcqdp[8]; + struct mv_egiga_txdesc *tcqdp[8]; u8 pad16[0x700 - 0x6dc - 4]; - struct kwgbe_tqx tqx[8]; + struct mv_egiga_tqx tqx[8]; u32 pttbc; u8 pad17[0x7a8 - 0x780 - 4]; u32 tqxipg0; @@ -447,26 +447,26 @@ struct kwgbe_registers { };
/* structures/enums needed by driver */ -enum kwgbe_adrwin { - KWGBE_WIN0, - KWGBE_WIN1, - KWGBE_WIN2, - KWGBE_WIN3, - KWGBE_WIN4, - KWGBE_WIN5 +enum mv_egiga_adrwin { + MV_EGIGA_WIN0, + MV_EGIGA_WIN1, + MV_EGIGA_WIN2, + MV_EGIGA_WIN3, + MV_EGIGA_WIN4, + MV_EGIGA_WIN5 };
-enum kwgbe_target { - KWGBE_TARGET_DRAM, - KWGBE_TARGET_DEV, - KWGBE_TARGET_CBS, - KWGBE_TARGET_PCI0, - KWGBE_TARGET_PCI1 +enum mv_egiga_target { + MV_EGIGA_TARGET_DRAM, + MV_EGIGA_TARGET_DEV, + MV_EGIGA_TARGET_CBS, + MV_EGIGA_TARGET_PCI0, + MV_EGIGA_TARGET_PCI1 };
-struct kwgbe_winparam { - enum kwgbe_adrwin win; /* Window number */ - enum kwgbe_target target; /* System targets */ +struct mv_egiga_winparam { + enum mv_egiga_adrwin win; /* Window number */ + enum mv_egiga_target target; /* System targets */ u16 attrib; /* BAR attrib. See above macros */ u32 base_addr; /* Window base address in u32 form */ u32 high_addr; /* Window high address in u32 form */ @@ -475,29 +475,29 @@ struct kwgbe_winparam { u16 access_ctrl; /*Access ctrl register. see above macros */ };
-struct kwgbe_rxdesc { +struct mv_egiga_rxdesc { u32 cmd_sts; /* Descriptor command status */ u16 buf_size; /* Buffer size */ u16 byte_cnt; /* Descriptor buffer byte count */ u8 *buf_ptr; /* Descriptor buffer pointer */ - struct kwgbe_rxdesc *nxtdesc_p; /* Next descriptor pointer */ + struct mv_egiga_rxdesc *nxtdesc_p; /* Next descriptor pointer */ };
-struct kwgbe_txdesc { +struct mv_egiga_txdesc { u32 cmd_sts; /* Descriptor command status */ u16 l4i_chk; /* CPU provided TCP Checksum */ u16 byte_cnt; /* Descriptor buffer byte count */ u8 *buf_ptr; /* Descriptor buffer ptr */ - struct kwgbe_txdesc *nxtdesc_p; /* Next descriptor ptr */ + struct mv_egiga_txdesc *nxtdesc_p; /* Next descriptor ptr */ };
/* port device data struct */ -struct kwgbe_device { +struct mv_egiga_device { struct eth_device dev; - struct kwgbe_registers *regs; - struct kwgbe_txdesc *p_txdesc; - struct kwgbe_rxdesc *p_rxdesc; - struct kwgbe_rxdesc *p_rxdesc_curr; + struct mv_egiga_registers *regs; + struct mv_egiga_txdesc *p_txdesc; + struct mv_egiga_rxdesc *p_rxdesc; + struct mv_egiga_rxdesc *p_rxdesc_curr; u8 *p_rxbuf; u8 *p_aligned_txbuf; }; diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 2fbc6ad..f933017 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -172,9 +172,9 @@ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ #define CONFIG_CMD_MII -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MV_EGIGA /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,1} /* enable both ports */ +#define CONFIG_MV_EGIGA_PORTS {1,1} /* enable both ports */ #define CONFIG_PHY_BASE_ADR 0 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init mv88e1121 PHY */ diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index a928c2c..ec7d9c5 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -127,9 +127,9 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MV_EGIGA /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MV_EGIGA_PORTS {1,0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */ diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h index 96b4d1c..8281d49 100644 --- a/include/configs/mv88f6281gtw_ge.h +++ b/include/configs/mv88f6281gtw_ge.h @@ -172,9 +172,9 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MV_EGIGA /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MV_EGIGA_PORTS {1,0} /* enable port 0 only */ #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #endif /* CONFIG_CMD_NET */
diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h index d2f4502..03ee2ad 100644 --- a/include/configs/openrd_base.h +++ b/include/configs/openrd_base.h @@ -183,9 +183,9 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MV_EGIGA /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MV_EGIGA_PORTS {1,0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0x8 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h index 3d8e25c..799f50b 100644 --- a/include/configs/rd6281a.h +++ b/include/configs/rd6281a.h @@ -171,8 +171,8 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,1} /* enable both ports */ +#define CONFIG_MV_EGIGA /* Enable Marvell Gbe Controller Driver */ +#define CONFIG_MV_EGIGA_PORTS {1,1} /* enable both ports */ #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE #define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */ #define CONFIG_PHY_SPEED _1000BASET /*Force PHYspeed to 1GBPs */ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index e9edc44..40c3f96 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -174,9 +174,9 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MV_EGIGA /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MV_EGIGA_PORTS {1,0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ diff --git a/include/netdev.h b/include/netdev.h index 882642a..434848d 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -61,7 +61,6 @@ int ftmac100_initialize(bd_t *bits); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); int inca_switch_initialize(bd_t *bis); -int kirkwood_egiga_initialize(bd_t *bis); int lan91c96_initialize(u8 dev_num, int base_addr); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); @@ -70,6 +69,7 @@ int mpc512x_fec_initialize(bd_t *bis); int mpc5xxx_fec_initialize(bd_t *bis); int mpc8220_fec_initialize(bd_t *bis); int mpc82xx_scc_enet_initialize(bd_t *bis); +int mv_egiga_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); int npe_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis);