Signed-off-by: Andreas Bießmann biessmann@corscience.de --- No changes since V1
include/configs/mimc200.h | 56 ++++++++++++++++++++++---------------------- 1 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index f004ec8..66b9477 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -26,12 +26,12 @@
#include <asm/arch/hardware.h>
-#define CONFIG_AVR32 1 -#define CONFIG_AT32AP 1 -#define CONFIG_AT32AP7000 1 -#define CONFIG_MIMC200 1 +#define CONFIG_AVR32 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_MIMC200
-#define CONFIG_MIMC200_EXT_FLASH 1 +#define CONFIG_MIMC200_EXT_FLASH
#define CONFIG_SYS_HZ 1000
@@ -40,8 +40,8 @@ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency * and the PBA bus to run at 1/4 the PLL frequency. */ -#define CONFIG_PLL 1 -#define CONFIG_SYS_POWER_MANAGER 1 +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER #define CONFIG_SYS_OSC0_HZ 10000000 #define CONFIG_SYS_PLL0_DIV 1 #define CONFIG_SYS_PLL0_MUL 15 @@ -69,11 +69,11 @@ #define CONFIG_MIMC200_DBGLINK 1
/* User serviceable stuff */ -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_DOS_PARTITION
-#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG
#define CONFIG_STACKSIZE (2048)
@@ -83,9 +83,9 @@ #define CONFIG_BOOTCOMMAND \ "fsload boot/uImage; bootm"
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ -#define CONFIG_DISABLE_CONSOLE 1 /* disable console */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CONFIG_SILENT_CONSOLE /* enable silent startup */ +#define CONFIG_DISABLE_CONSOLE /* disable console */ +#define CONFIG_SYS_DEVICE_NULLDEV /* include nulldev device */
#define CONFIG_LCD 1
@@ -94,16 +94,16 @@ * data on the serial line may interrupt the boot sequence. */ #define CONFIG_BOOTDELAY 0 -#define CONFIG_ZERO_BOOTDELAY_CHECK 1 -#define CONFIG_AUTOBOOT 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_AUTOBOOT
/* * After booting the board for the first time, new ethernet addresses * should be generated and assigned to the environment variables * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_NET_MULTI
/* * BOOTP/DHCP options @@ -124,13 +124,13 @@ #define CONFIG_CMD_MMC #define CONFIG_CMD_NET
-#define CONFIG_ATMEL_USART 1 -#define CONFIG_MACB 1 -#define CONFIG_PORTMUX_PIO 1 +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO #define CONFIG_SYS_NR_PIOS 5 -#define CONFIG_SYS_HSDRAMC 1 -#define CONFIG_MMC 1 -#define CONFIG_ATMEL_MCI 1 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_ATMEL_MCI
#if defined(CONFIG_LCD) #define CONFIG_CMD_BMP @@ -151,8 +151,8 @@
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE 0x00000000 #define CONFIG_SYS_FLASH_SIZE 0x800000 @@ -168,7 +168,7 @@ #define CONFIG_SYS_FRAM_BASE 0x08000000 #define CONFIG_SYS_FRAM_SIZE 0x20000
-#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SIZE 65536 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
@@ -186,7 +186,7 @@ #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)