From: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.de
The sdhci controller assumes that the base clock frequency is fully supported by the peripheral and doesn't support hardware limitations. The Linux kernel distinguishes between base clock (max_clk) of the host controller and maximum frequency (f_max) of the card interface. Use the same differentiation and allow the platform to constrain the peripheral interface.
Signed-off-by: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.de
---
Changes in v3: - Rename arguments of sdhci_setup_cfg function from max_clk/min_clk to f_max/f_min
Changes in v2: None
drivers/mmc/atmel_sdhci.c | 7 +++++-- drivers/mmc/bcm2835_sdhci.c | 3 ++- drivers/mmc/ftsdc021_sdhci.c | 3 ++- drivers/mmc/kona_sdhci.c | 3 ++- drivers/mmc/msm_sdhci.c | 2 ++ drivers/mmc/mv_sdhci.c | 3 ++- drivers/mmc/pci_mmc.c | 1 + drivers/mmc/pic32_sdhci.c | 4 +++- drivers/mmc/rockchip_sdhci.c | 4 ++-- drivers/mmc/s5p_sdhci.c | 5 +++-- drivers/mmc/sdhci.c | 34 ++++++++++++++++++---------------- drivers/mmc/spear_sdhci.c | 3 ++- drivers/mmc/zynq_sdhci.c | 4 +++- include/sdhci.h | 13 +++++++------ 14 files changed, 54 insertions(+), 35 deletions(-)
diff --git a/drivers/mmc/atmel_sdhci.c b/drivers/mmc/atmel_sdhci.c index 6654b54..62cb242 100644 --- a/drivers/mmc/atmel_sdhci.c +++ b/drivers/mmc/atmel_sdhci.c @@ -35,8 +35,9 @@ int atmel_sdhci_init(void *regbase, u32 id) free(host); return -ENODEV; } + host->max_clk = max_clk;
- add_sdhci(host, max_clk, min_clk); + add_sdhci(host, 0, min_clk);
return 0; } @@ -95,7 +96,9 @@ static int atmel_sdhci_probe(struct udevice *dev) if (!max_clk) return -EINVAL;
- ret = sdhci_setup_cfg(&plat->cfg, host, max_clk, ATMEL_SDHC_MIN_FREQ); + host->max_clk = max_clk; + + ret = sdhci_setup_cfg(&plat->cfg, host, 0, ATMEL_SDHC_MIN_FREQ); if (ret) return ret;
diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index cb2bd40..29c2a85 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -181,10 +181,11 @@ int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq) host->ioaddr = (void *)(unsigned long)regbase; host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_NO_HISPD_BIT; + host->max_clk = emmc_freq; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; host->ops = &bcm2835_ops;
- add_sdhci(host, emmc_freq, MIN_FREQ); + add_sdhci(host, 0, MIN_FREQ);
return 0; } diff --git a/drivers/mmc/ftsdc021_sdhci.c b/drivers/mmc/ftsdc021_sdhci.c index 6e9fefa..4940ccb 100644 --- a/drivers/mmc/ftsdc021_sdhci.c +++ b/drivers/mmc/ftsdc021_sdhci.c @@ -27,7 +27,8 @@ int ftsdc021_sdhci_init(u32 regbase) host->name = "FTSDC021"; host->ioaddr = (void __iomem *)regbase; host->quirks = 0; - add_sdhci(host, freq, 0); + host->max_clk = freq; + add_sdhci(host, 0, 0);
return 0; } diff --git a/drivers/mmc/kona_sdhci.c b/drivers/mmc/kona_sdhci.c index 549f6bc..ddd821b 100644 --- a/drivers/mmc/kona_sdhci.c +++ b/drivers/mmc/kona_sdhci.c @@ -121,12 +121,13 @@ int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks) host->name = "kona-sdhci"; host->ioaddr = reg_base; host->quirks = quirks; + host->max_clk = max_clk;
if (init_kona_mmc_core(host)) { free(host); return -EINVAL; }
- add_sdhci(host, max_clk, min_clk); + add_sdhci(host, 0, min_clk); return ret; } diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c index f33714b..1db683d 100644 --- a/drivers/mmc/msm_sdhci.c +++ b/drivers/mmc/msm_sdhci.c @@ -96,6 +96,8 @@ static int msm_sdc_probe(struct udevice *dev)
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_BROKEN_R1B;
+ host->max_clk = 0; + /* Init clocks */ ret = msm_sdc_clk_init(dev); if (ret) diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c index e388ad1..69aa87b 100644 --- a/drivers/mmc/mv_sdhci.c +++ b/drivers/mmc/mv_sdhci.c @@ -77,6 +77,7 @@ int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks) host->name = MVSDH_NAME; host->ioaddr = (void *)regbase; host->quirks = quirks; + host->max_clk = max_clk; #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS memset(&mv_ops, 0, sizeof(struct sdhci_ops)); mv_ops.write_b = mv_sdhci_writeb; @@ -88,5 +89,5 @@ int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks) sdhci_mvebu_mbus_config((void __iomem *)regbase); }
- return add_sdhci(host, max_clk, min_clk); + return add_sdhci(host, 0, min_clk); } diff --git a/drivers/mmc/pci_mmc.c b/drivers/mmc/pci_mmc.c index 3d587cc..e39b476 100644 --- a/drivers/mmc/pci_mmc.c +++ b/drivers/mmc/pci_mmc.c @@ -32,6 +32,7 @@ int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported) dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase); mmc_host->ioaddr = (void *)(ulong)iobase; mmc_host->quirks = 0; + mmc_host->max_clk = 0; ret = add_sdhci(mmc_host, 0, 0); if (ret) return ret; diff --git a/drivers/mmc/pic32_sdhci.c b/drivers/mmc/pic32_sdhci.c index 2abf943..c562aec 100644 --- a/drivers/mmc/pic32_sdhci.c +++ b/drivers/mmc/pic32_sdhci.c @@ -41,7 +41,9 @@ static int pic32_sdhci_probe(struct udevice *dev) return ret; }
- ret = add_sdhci(host, f_min_max[1], f_min_max[0]); + host->max_clk = f_min_max[1]; + + ret = add_sdhci(host, 0, f_min_max[0]); if (ret) return ret; host->mmc->dev = dev; diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index c56e1a3..4456a02 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -35,9 +35,9 @@ static int arasan_sdhci_probe(struct udevice *dev) int ret;
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD; + host->max_clk = CONFIG_ROCKCHIP_SDHCI_MAX_FREQ;
- ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ, - EMMC_MIN_FREQ); + ret = sdhci_setup_cfg(&plat->cfg, host, 0, EMMC_MIN_FREQ);
host->mmc = &plat->mmc; if (ret) diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index ac737e0..bf0c485 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -80,6 +80,7 @@ static int s5p_sdhci_core_init(struct sdhci_host *host) host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8; + host->max_clk = 52000000; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
host->set_control_reg = &s5p_sdhci_set_control_reg; @@ -89,7 +90,7 @@ static int s5p_sdhci_core_init(struct sdhci_host *host) host->host_caps |= MMC_MODE_8BIT;
#ifndef CONFIG_BLK - return add_sdhci(host, 52000000, 400000); + return add_sdhci(host, 0, 400000); #else return 0; #endif @@ -245,7 +246,7 @@ static int s5p_sdhci_probe(struct udevice *dev) if (ret) return ret;
- ret = sdhci_setup_cfg(&plat->cfg, host, 52000000, 400000); + ret = sdhci_setup_cfg(&plat->cfg, host, 0, 400000); if (ret) return ret;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 766e9ee..0e59dbc 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -325,7 +325,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock) */ if (host->clk_mul) { for (div = 1; div <= 1024; div++) { - if ((mmc->cfg->f_max * host->clk_mul / div) + if ((host->max_clk * host->clk_mul / div) <= clock) break; } @@ -338,13 +338,13 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock) div--; } else { /* Version 3.00 divisors must be a multiple of 2. */ - if (mmc->cfg->f_max <= clock) { + if (host->max_clk <= clock) { div = 1; } else { for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) { - if ((mmc->cfg->f_max / div) <= clock) + if ((host->max_clk / div) <= clock) break; } } @@ -353,7 +353,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock) } else { /* Version 2.00 divisors must be a power of 2. */ for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) { - if ((mmc->cfg->f_max / div) <= clock) + if ((host->max_clk / div) <= clock) break; } div >>= 1; @@ -534,7 +534,7 @@ static const struct mmc_ops sdhci_ops = { #endif
int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, - u32 max_clk, u32 min_clk) + u32 f_max, u32 f_min) { u32 caps, caps_1;
@@ -557,24 +557,26 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, #ifndef CONFIG_DM_MMC_OPS cfg->ops = &sdhci_ops; #endif - if (max_clk) - cfg->f_max = max_clk; - else { + if (host->max_clk == 0) { if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) - cfg->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK) >> + host->max_clk = (caps & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; else - cfg->f_max = (caps & SDHCI_CLOCK_BASE_MASK) >> + host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; - cfg->f_max *= 1000000; + host->max_clk *= 1000000; } - if (cfg->f_max == 0) { + if (host->max_clk == 0) { printf("%s: Hardware doesn't specify base clock frequency\n", __func__); return -EINVAL; } - if (min_clk) - cfg->f_min = min_clk; + if (f_max && (f_max < host->max_clk)) + cfg->f_max = f_max; + else + cfg->f_max = host->max_clk; + if (f_min) + cfg->f_min = f_min; else { if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_300; @@ -623,11 +625,11 @@ int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg) return mmc_bind(dev, mmc, cfg); } #else -int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) +int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min) { int ret;
- ret = sdhci_setup_cfg(&host->cfg, host, max_clk, min_clk); + ret = sdhci_setup_cfg(&host->cfg, host, f_max, f_min); if (ret) return ret;
diff --git a/drivers/mmc/spear_sdhci.c b/drivers/mmc/spear_sdhci.c index 06179cd..d3f8669 100644 --- a/drivers/mmc/spear_sdhci.c +++ b/drivers/mmc/spear_sdhci.c @@ -21,7 +21,8 @@ int spear_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) host->name = "sdhci"; host->ioaddr = (void *)regbase; host->quirks = quirks; + host->max_clk = max_clk;
- add_sdhci(host, max_clk, min_clk); + add_sdhci(host, 0, min_clk); return 0; } diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 3da1385..69efa38 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -36,7 +36,9 @@ static int arasan_sdhci_probe(struct udevice *dev) host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; #endif
- ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ZYNQ_SDHCI_MAX_FREQ, + host->max_clk = CONFIG_ZYNQ_SDHCI_MAX_FREQ; + + ret = sdhci_setup_cfg(&plat->cfg, host, 0, CONFIG_ZYNQ_SDHCI_MIN_FREQ); host->mmc = &plat->mmc; if (ret) diff --git a/include/sdhci.h b/include/sdhci.h index 144570f..6c9f7a7 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -243,6 +243,7 @@ struct sdhci_host { unsigned int quirks; unsigned int host_caps; unsigned int version; + unsigned int max_clk; /* Maximum Base Clock frequency */ unsigned int clk_mul; /* Clock Multiplier value */ unsigned int clock; struct mmc *mmc; @@ -372,11 +373,11 @@ static inline u8 sdhci_readb(struct sdhci_host *host, int reg) * * @cfg: Configuration structure to fill in (generally &plat->mmc) * @host: SDHCI host structure - * @max_clk: Maximum supported clock speed in HZ (0 for default) - * @min_clk: Minimum supported clock speed in HZ (0 for default) + * @f_max: Maximum supported clock frequency in HZ (0 for default) + * @f_min: Minimum supported clock frequency in HZ (0 for default) */ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, - u32 max_clk, u32 min_clk); + u32 f_max, u32 f_min);
/** * sdhci_bind() - Set up a new MMC block device @@ -402,11 +403,11 @@ int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); * This is used when you are not using CONFIG_BLK. Convert your driver over! * * @host: SDHCI host structure - * @max_clk: Maximum supported clock speed in HZ (0 for default) - * @min_clk: Minimum supported clock speed in HZ (0 for default) + * @f_max: Maximum supported clock frequency in HZ (0 for default) + * @f_min: Minimum supported clock frequency in HZ (0 for default) * @return 0 if OK, -ve on error */ -int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk); +int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min); #endif /* !CONFIG_BLK */
#ifdef CONFIG_DM_MMC_OPS