On 10 November 2015 at 03:24, Lin Huang hl@rock-chips.com wrote:
show how to packet rk3036 uboot image and boot from SD
Signed-off-by: Lin Huang hl@rock-chips.com
Changes in v1: None Changes in v2: None Changes in v3: None Changes in v4:
- fix some spell error
Changes in v5:
- Adviced by Simon:
- add evb rk3036 board to supported boards
doc/README.rockchip | 11 +++++++++++ 1 file changed, 11 insertions(+)
Acked-by: Simon Glass sjg@chromium.org
One nit below.
diff --git a/doc/README.rockchip b/doc/README.rockchip index 87ce9d2..9395f53 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -42,6 +42,10 @@ At present three RK3288 boards are supported: - Radxa Rock 2 - also uses firefly-rk3288 configuration - Haier Chromebook - use chromebook_jerry configuration
+one RK3036 board is support:
- EVB RK3036 - use evb-rk3036_defconfig configuration
For example:
CROSS_COMPILE=arm-linux-gnueabi- make O=firefly firefly-rk3288_defconfig all@@ -118,6 +122,13 @@ something like: Err: serial@ff690000 =>
+For evb_rk3036 board:
./evb-rk3036/tools/mkimage -T rksd -d evb-rk3036/spl/u-boot-spl.bin out && \cat evb-rk3036/u-boot-dtb.bin >> out && \sudo dd if=out of=/dev/sdc seek=64+Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, the
debug uart must be disable
disabled
Booting from SPI
-- 1.9.1