Re: [U-Boot] [PATCH] fsl_pci_init: Make fsl_pci_init_port() PCI/PCIe aware

Dear Peter Tyser,

In message 1288297499-21417-1-git-send-email-ptyser@xes-inc.com you wrote:

Previously fsl_pci_init_port() always assumed that a port was a PCIe port and would incorrectly print messages for a PCI port such as the following on bootup: PCI1: 32 bit, 33 MHz, sync, host, arbiter Scanning PCI bus 00 PCIE1 on bus 00 - 00

This change corrects the output of fsl_pci_init_port(): PCI1: 32 bit, 33 MHz, sync, host, arbiter Scanning PCI bus 00 PCI1 on bus 00 - 00

Signed-off-by: Peter Tyser ptyser@xes-inc.com

Tested on a MPC8548 with PCI, and a MPC8640 with PCIe

drivers/pci/fsl_pci_init.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-)

Applied, thanks.

Kumar, I hope this is OK with you.

Best regards,

Wolfgang Denk