On 07.06.21 16:34, Marek Behún wrote:
Hello Stefan,
Here are some changes for Turris MOX (v2):
- dts changes
- more config options enabled
- rescue mode support added
If it is possible, since this touches only our device, we would like this to be also merged for v2021.07 (once reviewed by you and Pali).
Done. ;)
Applied to u-boot-marvell/master
Thanks, Stefan
Changes since v1:
- use constant addresses instead of ${kernel_addr_r} and ${ramdisk_addr_r} in bootcmd_rescue, so that this command won't fail if those addresses are changed
- dropped last patch changing internal-regs node name in dts. We don't need this now, let's do this in the future once we will be aligning U-Boot's DTS with kernel's DTS
Marek Behún (6): arm: mvebu: dts: turris_mox: add button and LED nodes arm: mvebu: turris_mox: add support for board rescue mode arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue arm: mvebu: configs: turris_mox: add fdtfile default env variable arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions arm: mvebu: turris_mox: enable options for Turris network boot
arch/arm/dts/armada-3720-turris-mox.dts | 55 ++++++++++++ board/CZ.NIC/turris_mox/turris_mox.c | 106 ++++++++++++++++++++++++ configs/turris_mox_defconfig | 14 ++++ include/configs/turris_mox.h | 10 +++ 4 files changed, 185 insertions(+)
Viele Grüße, Stefan