imx8mm eLCDIF clock

Hi, I'm working on drivers/clk/imx/clk-imx8mm.c to port and bring up eLCDIF clocks. After port all necessary clocks needed by eLCDIF I found that IMX8MM_VIDEO_PLL1 clock is not enabled and need the following code to enable it at the end of the clk-imx8mm probe:

struct clk *clkp;

clk_get_by_id(IMX8MM_VIDEO_PLL1, &clkp); clk_set_rate(clkp, 594000000UL); clk_enable(clkp);

What do you think about this solution? There is a more standard way to do this?

Thanks, Tommmaso