Switch to our linear_range helpers and remove unused/unsupported linux-isms.
Acked-by: Sumit Garg sumit.garg@linaro.org Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- drivers/power/regulator/qcom-rpmh-regulator.c | 28 +++++++++++++-------------- 1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/power/regulator/qcom-rpmh-regulator.c b/drivers/power/regulator/qcom-rpmh-regulator.c index d0acee9f558e..089623f3a2b9 100644 --- a/drivers/power/regulator/qcom-rpmh-regulator.c +++ b/drivers/power/regulator/qcom-rpmh-regulator.c @@ -102,13 +102,12 @@ struct linear_range { * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations * @regulator_type: RPMh accelerator type used to manage this * regulator * @ops: Pointer to regulator ops callback structure - * @voltage_ranges: The possible ranges of voltages supported by this - * PMIC regulator type - * @n_linear_ranges: Number of entries in voltage_ranges + * @voltage_range: The single range of voltages supported by this + * PMIC regulator type * @n_voltages: The number of unique voltage set points defined - * by voltage_ranges + * by voltage_range * @hpm_min_load_uA: Minimum load current in microamps that requires * high power mode (HPM) operation. This is used * for LDO hardware type regulators only. * @pmic_mode_map: Array indexed by regulator framework mode @@ -119,15 +118,15 @@ struct linear_range { * in device tree to a regulator framework mode */ struct rpmh_vreg_hw_data { enum rpmh_regulator_type regulator_type; - const struct regulator_ops *ops; - const struct linear_range *voltage_ranges; - int n_linear_ranges; + const struct dm_regulator_ops *ops; + struct linear_range voltage_range; int n_voltages; int hpm_min_load_uA; - const int *pmic_mode_map; - unsigned int (*of_map_mode)(unsigned int mode); + struct dm_regulator_mode *pmic_mode_map; + int n_modes; + unsigned int (*of_map_mode)(unsigned int mode); };
/** * struct rpmh_vreg - individual RPMh regulator data structure encapsulating a @@ -148,23 +147,22 @@ struct rpmh_vreg_hw_data { * not * @bypassed: Boolean indicating if the regulator is in * bypass (pass-through) mode or not. This is * only used by BOB rpmh-regulator resources. - * @voltage_selector: Selector used for get_voltage_sel() and - * set_voltage_sel() callbacks + * @uv: Selector used for get_voltage_sel() and + * set_value() callbacks * @mode: RPMh VRM regulator current framework mode */ struct rpmh_vreg { - struct device *dev; + struct udevice *dev; u32 addr; - struct regulator_desc rdesc; const struct rpmh_vreg_hw_data *hw_data; bool always_wait_for_ack;
int enabled; bool bypassed; - int voltage_selector; - unsigned int mode; + int uv; + int mode; };
/** * struct rpmh_vreg_init_data - initialization data for an RPMh regulator