Hi
On Thu, Aug 7, 2008 at 8:07 AM, Jens Gehrlein sew_s@tqs.de wrote:
Jean-Christophe PLAGNIOL-VILLARD schrieb:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com
Makefile | 6 +++--- board/{ => freescale}/imx31_litekit/Makefile | 0 board/{ => freescale}/imx31_litekit/config.mk | 0 .../{ => freescale}/imx31_litekit/imx31_litekit.c | 0 .../{ => freescale}/imx31_litekit/lowlevel_init.S | 0 board/{ => freescale}/imx31_litekit/u-boot.lds | 0 board/{ => freescale}/imx31_phycore/Makefile | 0 board/{ => freescale}/imx31_phycore/config.mk | 0 .../{ => freescale}/imx31_phycore/imx31_phycore.c | 0 .../{ => freescale}/imx31_phycore/lowlevel_init.S | 0 board/{ => freescale}/imx31_phycore/u-boot.lds | 0 board/{ => freescale}/mx31ads/Makefile | 0 board/{ => freescale}/mx31ads/config.mk | 0 board/{ => freescale}/mx31ads/lowlevel_init.S | 0 board/{ => freescale}/mx31ads/mx31ads.c | 0 board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++----- 16 files changed, 8 insertions(+), 8 deletions(-) rename board/{ => freescale}/imx31_litekit/Makefile (100%) rename board/{ => freescale}/imx31_litekit/config.mk (100%) rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%) rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%) rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%) rename board/{ => freescale}/imx31_phycore/Makefile (100%) rename board/{ => freescale}/imx31_phycore/config.mk (100%) rename board/{ => freescale}/imx31_phycore/imx31_phycore.c (100%) rename board/{ => freescale}/imx31_phycore/lowlevel_init.S (100%) rename board/{ => freescale}/imx31_phycore/u-boot.lds (100%) rename board/{ => freescale}/mx31ads/Makefile (100%) rename board/{ => freescale}/mx31ads/config.mk (100%) rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%) rename board/{ => freescale}/mx31ads/mx31ads.c (100%) rename board/{ => freescale}/mx31ads/u-boot.lds (90%)
I'm not sure: is the phycore board a Freescale board? Isn't it Phytec?
Same goes for the Litekit board, the board is from LogicPD but the SoC is from Freescale. Perhaps a 'imx' or 'imx31' directory would be better with all i.MX{31} boards in that directory.
Regards, Magnus