Use standard board_usb_init() instead of the specific board_prepare_usb.
Signed-off-by: Ramon Fried ramon.fried@gmail.com
---
board/qualcomm/dragonboard410c/dragonboard410c.c | 4 ++-- drivers/usb/host/ehci-msm.c | 9 ++------- 2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.c b/board/qualcomm/dragonboard410c/dragonboard410c.c index 53e231e55a..e8a3ed0450 100644 --- a/board/qualcomm/dragonboard410c/dragonboard410c.c +++ b/board/qualcomm/dragonboard410c/dragonboard410c.c @@ -44,7 +44,7 @@ int dram_init_banksize(void) return 0; }
-int board_prepare_usb(enum usb_init_type type) +int board_usb_init(int index, enum usb_init_type init) { static struct udevice *pmic_gpio; static struct gpio_desc hub_reset, usb_sel; @@ -93,7 +93,7 @@ int board_prepare_usb(enum usb_init_type type) } }
- if (type == USB_INIT_HOST) { + if (init == USB_INIT_HOST) { /* Start USB Hub */ dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 17bfa7c02f..db982624dc 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -38,11 +38,6 @@ struct msm_ehci_priv { struct ulpi_viewport ulpi_vp; /* ULPI Viewport */ };
-int __weak board_prepare_usb(enum usb_init_type type) -{ - return 0; -} - static void setup_usb_phy(struct msm_ehci_priv *priv) { /* Select and enable external configuration with USB PHY */ @@ -102,7 +97,7 @@ static int ehci_usb_probe(struct udevice *dev) hcor = (struct ehci_hcor *)((phys_addr_t)hccr + HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
- ret = board_prepare_usb(USB_INIT_HOST); + ret = board_usb_init(0, USB_INIT_HOST); if (ret < 0) return ret;
@@ -124,7 +119,7 @@ static int ehci_usb_remove(struct udevice *dev)
reset_usb_phy(p);
- ret = board_prepare_usb(USB_INIT_DEVICE); /* Board specific hook */ + ret = board_usb_init(0, USB_INIT_DEVICE); /* Board specific hook */ if (ret < 0) return ret;