The DTS description in XEA for mac0 node in u-boot differs considerably from what we do have available in Linux, as u-boot is not supporting L2 switch (i.e. 'fixed-link' property is used).
To facilitate HW revision management - this particular property has been moved to version specific file.
Signed-off-by: Lukasz Majewski lukma@denx.de ---
arch/arm/dts/imx28-xea-1-u-boot.dtsi | 4 ++++ arch/arm/dts/imx28-xea-u-boot.dtsi | 1 - 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/imx28-xea-1-u-boot.dtsi b/arch/arm/dts/imx28-xea-1-u-boot.dtsi index 4b2b21eeae..2903be2089 100644 --- a/arch/arm/dts/imx28-xea-1-u-boot.dtsi +++ b/arch/arm/dts/imx28-xea-1-u-boot.dtsi @@ -9,3 +9,7 @@ * configuration in SPL for falcon boot. */ #include "imx28-xea-u-boot.dtsi" + +&mac0 { + phy-reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/dts/imx28-xea-u-boot.dtsi b/arch/arm/dts/imx28-xea-u-boot.dtsi index bdbeca528c..13a581f7a6 100644 --- a/arch/arm/dts/imx28-xea-u-boot.dtsi +++ b/arch/arm/dts/imx28-xea-u-boot.dtsi @@ -50,7 +50,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; phy-reset-duration = <1>; phy-reset-post-delay = <1>; status = "okay";