Thanks.
To be specific, I followed the steps to build RTEMS: 1) Download a set of toolsets (gcc-4.2.3, binutils-2.18, newlib-1.16 and RTEMS specific patches) and build them or use the pre-built rpm toolset for RHLE5. 2) Download the RTEMS (4.9.0 for the latest version) and use the toolset to build RTEMS. 3) Compile a RTEMS application, tailed for specific BSP. That is where I get .exe (it is ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), statically linked, not stripped). I just want to use the vendor provided U-Boot to download the .exe and get it run. I didn't expect to rebuilt U-Boot, but that might be educational :-)
Yuke
Jerry Van Baren wrote:
Yuke Tian wrote:
Hi,
Sorry to ask the stupid question. I did study the RTEMS for a while and am sure the tool set are correct (from ftp://www.rtems.com), otherwise they will not build RTEMS. All the tools and development are done in linux (RHLE5). I just got this board using U-boot and not sure about it. David's manual help a lot. Thanks.
Yuke
I didn't call your question stupid, just clueless. ;-)
It sounds like you are coming up to speed rapidly, including providing useful background information and asking smart questions. You might add the following to your reading list: http://www.catb.org/esr/faqs/smart-questions.html
Best regards, gvb