Hello Hans,
On Mon, Nov 30, 2015 at 4:13 PM, Hans de Goede hdegoede@redhat.com wrote:
Hi Vishnu,
This patch v2 of series that adds basic support for Allwinner A83T SOC with review comments addressed.
Can you provide some quick instructions on how to test this on the A83T HomletV2 ?
With v1 of these patches I tried to just build them and dd them to the sdcard, but that did not work.
In the mean time I've figured out that I can get a serial console with the firmware in the nand using a sdcard breakout board, so I should be able to enter FEL mode by pressing 2 there, but it would be really nice if the board would just boot from sdcard...
I broke microsd connector of my A83T board, so boot from microsd not tested.
As you have microSD breakout UART working, you can set CONFIG_UART0_PORT_F=y and use FEL mode, commands as below sunxi-fel spl u-boot-sunxi-with-spl.bin sunxi-fel write 0x4a000000 u-boot-dtb.bin
This is how i have tested it for now.
Regards,
Hans _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot