Subject: Re: Cannot boot mx6qsabred with 2019.07-rc2
Hi Peng,
On Thu, May 16, 2019 at 11:17 PM Peng Fan peng.fan@nxp.com wrote:
Hi Fabio
Booting from SD3, it works for me. See below log.
" U-Boot SPL 2019.07-rc2 (May 17 2019 - 10:24:45 +0800) Trying to boot from MMC1
U-Boot 2019.07-rc2 (May 17 2019 - 10:24:45 +0800)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C)Reset cause: POR Model: Freescale i.MX6 Quad SABRE Smart Device Board
Interesting.
It fails for me and for a customer with the same error log.
What could explain such difference?
You could enable DEBUG in SPL, and disable SPL_SDP because of size will exceeds. Then see what happends. I have no idea, then. My board is REV C4, chip 1.5
Regards, Peng.